Other Available Colors:

  • Includes table top, base, and all necessary hardware; takes the guess-work out of compatibility
  • Choose from a classic cherry or modern black side from the reversible top
  • Straight base plates ensure stability and balance
  • Traditional standard height table seats up to 4 guests
  • For indoor use only; great for pizza shops, cafeterias, delis, and more
Shipping:

Other Products from this Line

Take the guess-work out of selecting compatible table tops and bases by choosing this Lancaster Table and Seating standard height table with 30" x 42" reversible cherry / black table top and straight base plates!

This standard height table comes complete with everything you need to quickly and easily assemble a classic 4-top table. From the strong, sturdy cast iron base plates and spiders, to the sleek black columns and durable laminated table top, this table is an all-in-one addition to any establishment. The versatile 30" x 42" design comfortably seats 4 guests without taking up too much room, making it the perfect choice for any restaurant, pizza shop, or cafeteria! This table comes unassembled to save you on shipping costs.

  • Seating Capacity: 4

    Seating Capacity: 4

    Four people can comfortably sit at this table.

Cherry / Black Table Top

This table comes with a reversible cherry / black table top. Choose cherry for a classic look or black for a modern touch.

Black Vinyl Molding

Black vinyl molding protects it from chipping and scuffing, extending the life of the table while adding a polished presentation.

Easy to Clean

The attractive laminate on either side is easy to clean, requiring no maintenance or special chemicals.

Dependable Table Base

This table's eye-catching table top is accented and supported by the included table base. Two 25" high black powder-coated steel columns and rods extend the table top to dining height and are connected to the table top via black, powder-coated 10" spider attachments. At the base of the table, 5" x 22" black, powder-coated straight base plates help to prevent the table from wobbling, ensuring stability and balance. A 12-piece floor glide and screw hardware kit attaches to the base, further assisting in leveling the table while preventing the base from scratching the floor.

Customer Q&A Ask a Question

Does the table top come pre-drilled?
No. Since the tabletop can be installed on a variety of bases, it does not include pre-drilled holes for screws. These must be drilled upon assembly.

How to Assemble a Restaurant Table Base

Before furnishing your bar or restaurant with stylish and sturdy tables, watch this video to learn how to assemble a restaurant table base! Here you'll find the parts and the steps needed for successful assembly.

Assembling your restaurant table base can be done with ease by following a few quick steps! Begin by placing your threaded rod through the hole in the spider, until the end of the rod sits in the top of the spider. Flip this over to then place the column over the threaded rod, and slide it down until it touches the spider. Align the center of the base with the column, and push the end of the threaded rod through the hole in the base. Place the washer and the nut on the threaded rod, and use a wrench to screw the nut into place. When screwing the nut in, make sure that the top of the threaded rod is tight against the spider, which will help to ensure that your base will be stable. Screw the glides into the bottom of the base to finish up the assembly. The first thing you’ll do is to take the threaded rod, and slide it through the hole on the spider. Note that the top of the threaded rod will slip into this indentation on the spider. Next add the column, and turn upside down. Now place the base atop this column, making sure it is properly aligned. Now place the washer and nut on the threaded rod, as you screw the nut, make sure that you can feel that the top of the rod is locked inside the indentation on the spider…you may have to pull up and turn a bit. Tighten the nut, and your base is almost finished. Just screw the glides onto the base and you are done. To mount on the table, just place the base onto the center of the table top, making sure to measure, and attach with screws through the holes in the spider. Thank you for watching, and if you have any questions, please contact us!

Copy and paste the embed code above.
Overall Dimensions:
  • Length: 42"
  • Width: 30"
  • Height: 28 7/8"
  • Tabletop Thickness: 1 1/8"

Resources and Downloads

Instructions Instructions Warranty Warranty Seating Capacity Guide Seating Capacity Guide

A PDF viewer is required to view this product's information. Download Adobe Acrobat software

Leave a review of this product!

If you've used this product, log in and leave a review to tell us and other customers what you thought about it. Get paid up to $16 for submitting one of the first text, photo, or video reviews for this item. View your account for details.

Login or Register