Kutol 9981GRA Health Guard 1000 mL Gray Automatic Hands Free Soap / Sanitizer Dispenser

Kutol's EZ hand hygiene no-touch dispenser dispenses foaming hand soap or hand sanitizers automatically by placing your hand under the sensor. This hands-free approach reduces the spread of germs through cross contamination. The soap is contained in a sealed bag that dispenses without contact. It can be mounted on a wall or free-standing floor stand to create a mobile hand hygiene station. With our unique top dispensing design, there's no risk of leaking valves, and unlike bottom dispensing systems, you can easily see the product being dispensed. For most applications, tape mounting is adequate. For porous, textured, or wallpaper surfaces, screw mounting is recommended. For ideal placement, mount the dispenser 3 inches above the countertop or sink fixture and 2 inches below any obstruction. Clean the mounting surface thoroughly and allow to dry completely. If tape mounting, remove the adhesive backing, carefully position the dispenser in the desire location and press firmly to the surface for 30 seconds. Allow the dispenser to remain empty for a minimum of 8 hours before filling. If screw mounting, open the dispenser and remove the dispensing module by pulling the tab forward and lifting up on the module. Hold the dispenser against the wall in the desired location. Mark the holes by pushing a pencil through the tape pad. Remove dispenser, drill holes where marked, and insert wall anchors. Mount dispenser by inserting screws through dispenser and into the wall anchors. Replace dispensing module by hooking slot in top under the tab on the back of the dispenser housing and snapping into place. If you have any additional questions about the installation of your Kutol products, contact your distributor or visit us online at www.kutol.com.