$46.99/Each

Ships free with Plus

You must buy a minimum of 5 and in additional increments of 5 due to manufacturer packaging.

Usually Ships in 5 Weeks from manufacturer

Lead times vary based on manufacturer stock

Product Overview

  • Safely collects grease from the air and drains it out
  • Collects up to 400 FPM of grease particles
  • Prevents range-top fires and extends life of equipment motors
  • Can be cleaned with hot water and dish soap
  • Easy to install with included snap-in handles
UPC Code:400015595988

Kleen-Gard 96049468 Specs

Quantity
1/Each
Shipping Weight
3.72 lb.
Width
20 Inches
Height
16 Inches
Actual Width
19 1/2 Inches
Actual Height
15 1/2 Inches
Actual Thickness
1 1/2 Inches
Features
Made in America
Filter Type
Kleen-Gard
Material
Stainless Steel
Thickness
2 Inches
Type
Hood Filters

Kleen-Gard 96049468 Details

The Kleen-Gard 96049468 16" x 20" x 2" stainless steel hood filter ensures proper sanitation and hygiene in your kitchen. Made of stainless steel, this heavy-duty filter collects up to 400 FPM (feet per minute) of grease particles that are floating through the air. It then deposits the grease directly onto the filter's smooth baffles, and properly drains it out. This safe practice keeps range-top fires from breaking out. It also helps to prolong the motor life of your blower equipment by keeping them clean.

For ease of use, this corrosion-resistant hood filter can be cleaned with hot water and dish soap once grease residue starts to build up. It comes with convenient snap-in handles for quick installation into your hood, over your fryer, griddle, up-right broiler, charbroiler, or combination gas oven. When properly installed, it meets the requirements of NFPA Standard 96.

Overall Dimensions:
Width: 20"
Thickness: 2"
Height: 16"

Actual Dimensions:
Width: 19 1/2"
Thickness: 1 1/2"
Height: 15 1/2"

Because this item is not stocked in our warehouse, processing, transit times and stock availability will vary. If you need your items by a certain date, please contact us prior to placing your order. Expedited shipping availability may vary. We cannot guarantee that this item can be cancelled off of the order or returned once it is placed.

Attention CA Residents:

Customer questions about this product

How do I know which side is the "height" and which side is the "width" of my hood filter?

The "height" side runs parallel to the baffles from top to bottom, while the "width" side is the left-to-right measurement. Like this:

Exhaust Hood Filter Measurements

Why are my hood filter's measurements a little different than what you have listed?

We list the nominal industry size of each filter on our site. The actual measurements are approximately 1/2" smaller in size.

Why do the baffles run up and down and not side to side?

These run up and down to allow grease to drain. If installed side to side, not only would you risk the handles getting in the way, but you would have grease build up, which is dangerous.
Ask your own question!
  • Made in America

    Made in America

    This item was made in the United States of America.

  • UL Listed, US

    UL Listed, US

    This product has been certified by the Underwriters Laboratories (UL) to meet applicable safety standards required for use in the United States.

Resources and Downloads for
Kleen-Gard 96049468

A PDF viewer is required to view this product's information. Download Adobe Acrobat software