Protect Your Product with Safeware

Protection Powered by Safeware

  • Designed for continuous use with a 85% solid waste volume reduction
  • Processes up to 700 lb. per hour and transfers compressed waste into included 10 gallon trash can
  • Corrosion-resistant stainless steel disposer and dewatering unit
  • Under-table design to save you space
  • Can use with 100% food waste or a mixture of food waste with up to 50% disposables
UPC Code: 050375019602
Shipping: Usually Ships in 4-5 Business Days.Not eligible for expedited shipping

Other Products from this Line

InSinkerator Waste Xpress

InSinkerator Waste Xpress

The InSinkerator Waste Xpress is a proven performer that reduces waste volume by 85% and is easy to install and operate. With a significantly smaller footprint, it’s unlike any of the food waste production system on the market today. Our waste express system will help you decrease labor cost, reduce waste hauling charges and increase efficiency. The system consists of several components, including a sink bowl, a trough or sink mounting, a 3 horsepower disposer, an electrical control, water controls and a de-watering unit. The kitchen waste is ground into small particles in the disposer grind chamber. The ground waste is the transferred through the plumbing into the de-watering unit. After waste is compressed, liquids are sent down the drain line and solid wastes exit through the shoot and into a standard 10 gallon trash receptacle. Waste express systems are designed for continuous operation; processing up to 700 pounds per hour. In places like hospital and health care facilities, restaurants, correctional facilities and business and industry. This system can handle all types of waste including food and disposable items like paper napkins, plastic utensils, jelly packets or straws. The unit can process 100% food waste or up to 50% disposable items. Dishes are scraped into a trough or sink bowl. The InSinkerator disposer grinds all food waste and disposable materials. As the waste moves up the auger, all excess water is squeezed out, all solid waste that is processed leaves the system through the shoot. Food waste from the shoot then empties into a standard 10 gallon trash receptacle. The end product is an 85% volume reduction from the original waste. This means fewer trips to the dumpster, thereby saving labor costs, reducing waste hauling costs and increasing overall profitability. As you can see, the end product is semi-dry waste with little moisture. Most of the water is squeezed out during the processing period. The cleaning and maintenance routine for the waste xpress system is easy. The disposer does not require cleaning; simply run it until all of the waste has been processed. The de-watering unit should be cleaned at least once per day. To clean it, simply remove the shoot by pulling up on the handles. Next, loosen the captive fasteners and lift off the bearing bracket and lift the auger and screen up and out. Any excess food waste on the auger or screen can also be discarded into the trash receptacle. Once food waste is removed, the auger, auger screen, shoot and bearing bracket can be placed in the dishwasher. The inside cabinet of the unit should be rinsed out with a hose or spray assembly. After the dishwashing cycle, all parts are clean and ready for the next use. To reassemble the unit simply place the auger inside the auger screen, then set it back in place. You may need to spin the auger to ensure that it is set in place correctly. The bearing bracket fits on top of the unit and locks into place by tightening the captive fasteners. Finally, replace the shoot. The unit is now ready for the next meal shift. In order to keep the waste xpress performing at optimum level, it is recommended that you avoid the following items: silverware, soda cans, glass and lids. These items may cause damage to the unit: saran wrap and latex gloves. These items act like rubber band and may jam the unit. The waste xpress system has some unique features compared to the traditional pulpar systems. First, it’s easy to clean. The hot water sprays cycle on and off to rinse the auger screen. Unlike traditional pulpar’s the Waste Xpress does not require cardboard and it can process 100% food waste. Plus, it has a significantly smaller footprint than other pulpars. To improver operation effectiveness of your system, InSinkerator offers some operation tips. We recommend that you start the unit prior to operating, avoid batch feeding, gradually feed waste, allow the unit to run 2-3 minutes after the last load of waste has been processed. For more details on troubleshooting, operating and cleaning reference the installation care and use manual which is including with your unit.

Copy and paste the embed code above.

Check out this video on InSinkerator's Waste Xpress! Learn more about specific details and features this unit has to offer. As well as, how to clean and assemble the unit. Plus, tips on how to keep it at maximum performance level.

InSinkErator WX-500-6-WX-101 Specs
Voltage 208-230/460
Horsepower 5 HP
Output 700 Pounds Per Hour
Power Type Electric
Waste Volume Reduction 85 Percent

InSinkErator WX-500-6-WX-101 Details

This InSinkErator WX-500-6-WX-101 WasteXpress system reduces waste volume by a whopping 85%, effectively decreasing labor costs, reducing waste hauling fees, and increasing overall efficiency! This unique pulper uses a 5 hp disposer to quickly grind kitchen waste, which is then sent to a dewatering unit. Here the waste is compressed, with liquids sent down a drain line and solids pumped through a chute into the included 10 gallon trash can. Its convenient under-table design fits under standard tables with a minimum height of 34" which will help you save space in your establishment. Plus, its corrosion resistant stainless steel disposer and dewatering unit ensure long-lasting durability.

Designed for continuous, high-volume operation in restaurants, nursing homes, and assisted living facilities, this extractor can process up to an impressive 700 lb. per hour. This unit can be used with 100% food waste or a mixture of food waste with up to 50% disposables. It includes an easy-to-use WX-101A stainless streel electrical control panel and a collar adapter kit with a permanent splash baffle which provides a 6 5/8" opening for welding into a trough or sink. In addition, its auger, auger screen, and chute are easily removed for cleaning without tools. This InSinkErator WasteXpress is perfect for any restaurant, hotel, or cafeteria!

Unit Includes:
- (1) WX500 WasteXpress disposer
- (1) WX101A WasteXpress control panel
- (1) WX WasteXpress dewatering unit
- (1) syphon breaker
- (1) flow control valve
- (1) 10 gallon waste bin
- (1) #6 collar adapter kit with permanent splash baffle
- (2) 24V water solenoids

Overall Dimensions:
Height: 33 1/2"

This Item Ships via Common Carrier. For more information and tips to help your delivery go smoothly, click here.

Because this item is not stocked in our warehouse, processing, transit times and stock availability will vary. If you need your items by a certain date, please contact us prior to placing your order. Expedited shipping availability may vary. We cannot guarantee that this item can be cancelled off of the order or returned once it is placed.

  • UL US & Canada

    UL US & Canada

    This item has been tested and meets safety standards imposed by the Underwriters Laboratories (UL) for use in the United States of America and Canada.

  • Made in America

    Made in America

    This item was made in the United States of America.

Resources and Downloads for
InSinkErator WX-500-6-WX-101

Leave a review of this product!

If you've used this product, log in and leave a review to tell us and other customers what you thought about it. Get paid up to $16 for submitting one of the first text, photo, or video reviews for this item. View your account for details.

Login or Register