$4,109.00/Each
This product is no longer available. We've left this page up for reference only.
Product Overview
- Type 1 hood for grease-producing equipment; exhaust-only system with no makeup air
- Includes backshelf hood canopy and exhaust fan
- 18-gauge 430 stainless steel construction on all exposed surfaces
- Allows for an underhang of 12", measured horizontally from the front edge of the cooking equipment
- 115/230V direct-drive exhaust fan (1600 CFM)
- Quantity
- 1/Each
- Shipping Weight
- 390 lb.
- Length
- 8 Feet
- Depth
- 23 Inches
- Height
- 14 - 38 Inches
- Ceiling Height
- Under 10'
- Amps
- 4.9 - 9.8 Amps
- Phase
- 1 Phase
- Voltage
- 115/230 Volts
- Wattage
- 1,127 Watts
- Features
- Made in America
- Fire Suppression
- Without Fire Suppression
- Gauge
- 18 Inches
- Horsepower
- 1/2 hp
- Plug Type
- Hardwire
- Stainless Steel Type
- Type 430
- Style
- Backshelf Hood Systems
- Type
- Type 1
Details
Keep your kitchen free of hazardous grease buildup with this Halifax LBSHP823 8' x 23" type 1 low proximity commercial kitchen backshelf hood system. This unit is suitable for use over any equipment that has a surface operating temperature under 700 degrees Fahrenheit, and that is required by fire code to have a type 1 hood - this includes fryers, griddles, charbroilers, conveyor pizza ovens, or any equipment that produces grease during the cooking process. The hood removes the grease-laden vapors produced by your equipment and prevents them from accumulating in places where they could become a fire or sanitation hazard, leaving your kitchen clean and safe to use! This is a low-proximity backshelf hood, which is designed for use in applications where the minimum distance from the floor to the bottom edge of the hood cannot be met with a standard canopy. It is an exhaust-only system with no makeup or supply fan and also contains a 115/230V direct-drive exhaust fan designed for 1600 CFM, with your choice of a wall, flat roof, or pitched roof curb mount.
The hood uses (4) 20" x 20" and (1) 20" x 16" baffle-type filters, and the filters are made from stainless steel to provide durability and make cleaning easy. Grease extracted by the filter is collected in a grease trough, which drains into a stainless steel grease cup for disposal. 18-gauge 430 stainless steel is used on all exposed surfaces to give it excellent durability and cleanability, while the MIG-welded frame provides seamless, liquid-tight joints. The hood features a sloped-front canopy design that drops down close to the equipment in the back while still offering plenty of clearance for cooking.
This hood allows for an underhang of 12", measured horizontally from the front edge of the cooking equipment. 4 hanger brackets are included (shipped loose) to make installation easy. This product must be hard-wired, cords and plugs are not included.
Overall Dimensions:
Length: 8'
Depth: 23"
Height (Front): 14"
Height (Back): 38"
Made in America
This item was made in the United States of America.
Hardwired
This product must be hardwired by a professional; it does not plug into a standard wall outlet.
UL Listed, US
This product has been certified by the Underwriters Laboratories (UL) to meet applicable safety standards required for use in the United States.
UL Classified EPH
This product has been certified by the Underwriters Laboratories (UL) to meet applicable ANSI/NSF standards and / or other food equipment hygiene codes and requirements.
Need Parts & Accessories?
Shop replacement parts and accessories for this item today!
Resources and Downloads
A PDF viewer is required to view this product's information. Download Adobe Acrobat software