$849.00/Each

Ships free with Plus

Earn up to $25.47 back (2,547 points)with a Webstaurant Rewards Visa® Credit Card

Usually Ships in 5-7 Business Days from manufacturer

Lead times vary based on manufacturer stock

Product Overview

  • Upblast exhaust fan for safely exhausting grease-laden air in commercial kitchens
  • Heavy gauge aluminum construction with curb cap
  • Disconnect switch in a weather resistant enclosure, quick-release hood latches, and integral drain hole for easy service and maintenance
  • Recommended for 3' - 4' hoods; compatible with 12" x 12" roof curbs
  • 700 CFM, 1519 RPM, 115V, Single Phase
UPC Code:400013631664

NAKS 10D-700-FF Specs

Quantity
1/Each
Shipping Weight
45 lb.
Height
18 3/8 Inches
Diameter
20 3/8 Inches
Phase
1 Phase
Voltage
115 Volts
Cubic Feet per Minute
700 CFM
Drive Type
Direct Drive
Features
Made in America
Horsepower
1/10 HP
Plug Type
Hardwire
RPM
1,519 RPM
Style
Upblast
Type
Exhaust Fans

NAKS 10D-700-FF Details

This NAKS 10D-700-FF direct drive centrifugal upblast exhaust fan works in conjunction with your restaurant hood (sold separately) to keep your kitchen free of hazardous grease buildup. Essential for use over fryers, griddles, charbroilers, conveyor pizza ovens, and other equipment that produces grease during the cooking process, the exhaust fan pulls grease-laden air out of the hood and shoots it up and out of the building. This prevents grease from accumulating where it could become a fire or sanitation hazard so that your kitchen stays clean and safe.

Compatible with 12" x 12" roof curbs, this exhaust fan is recommended for use with 3' - 4' hoods. The direct drive design is easier to clean and maintain than comparable belt drive fans as well as more energy efficient due to a reduction in friction, while its heavy gauge aluminum construction guarantees durability for long-lasting performance. An integrated curb cap, disconnect switch, quick-release hood latches, and drain hole combine to make a unit that is easy to install, service, and maintain!

The fan boasts a 1/10 hp motor that delivers 700 CFM and 1519 RPM. This unit requires a 115V single phase electrical connection. It must be hard-wired; a cord and plug are not included. Please be sure to review any relevant fire codes to your area before ordering a ventilation system, and understand the requirements for any equipment going under your hood as this may change from area to area.

Overall Dimensions:
Diameter: 20 3/8"
Height: 18 3/8"

Because this item is not stocked in our warehouse, processing, transit times and stock availability will vary. If you need your items by a certain date, please contact us prior to placing your order. Expedited shipping availability may vary. We cannot guarantee that this item can be cancelled off of the order or returned once it is placed.

Attention CA Residents:

Customer questions about this product

How do I size a fan for my hood?

There are many factors that can affect which fan you need for your hood. Any recommended hood sizes given in a fan’s description are representative of a typical installation – factors like long duct runs, duct turns, and using high heat equipment like fryers and charbroilers can require a more powerful fan. Please consult your AHJ (Authority Having Jurisdiction) or installer if you need assistance sizing a hood fan.
Ask your own question!
  • UL Listed, US

    UL Listed, US

    This product has been certified by the Underwriters Laboratories (UL) to meet applicable safety standards required for use in the United States.

  • Made in America

    Made in America

    This item was made in the United States of America.

  • Hardwired

    Hardwired

    This product must be hardwired by a professional; it does not plug into a standard wall outlet.

Find Related Products