good product but he aware installation kit need to be bought sepeartely
Waterloo 2.6 GPM Wall-Mounted Pet Grooming / Utility Faucet with 8" Centers, 9' Coiled Hose, and 6" Add-On Faucet
Item number 750fwu86
Works With
Apply, opens link in this tabEarn up to $7.41 back (741 points)
(741 points) with a Webstaurant Rewards Visa® Credit Card
Quick Shipping
Usually ships in 1 business day
Product Overview
- Multi-use faucet for pet grooming, washdown, and other utility applications
- 9' coiled hose, 2.6 GPM spray valve, 6" add-on swivel faucet
- Wall-mounted design with 8" adjustable centers; 1/2" NPT inlets
- 1/4 turn ceramic cartridges for long life and leak-protection
- Heavy-duty faucet base and spray valve; chrome-plated brass construction
UPC Code:400015798464
Works With
This Waterloo wall-mounted utility faucet is a versatile water fixture that can fill a wide range of roles in your business!
Waterloo products provide the industry-leading quality you expect. With heavy chrome-plated brass faucet bodies, ceramic cartridges engineered for durability, and certifications from a wide range of national and local regulatory agencies, you can install Waterloo products with confidence.
CSA, US and Canada
This product is certified by CSA to applicable U.S. and Canadian standards.
1/2" Water Connection
This unit comes with a 1/2" water connection for water supply.
NSF Certified
This item is certified by NSF to applicable standards.
Power and Control
A 9' long hose makes it easy to get water exactly where you need it when you need it, and the coiled design keeps it stowed out of the way when you don't need it. It's a great solution for pet and animal-grooming applications. Restaurants can also use it for easier equipment washdown, and it's great for plenty of other utility applications, too! The spray valve delivers a flow rate of 2.6 GPM, giving you the power needed to blast away debris while still being gentle enough for use on animals, in grooming applications.
Watertight Seal
This faucet uses ceramic cartridges, which provide a much lower fail rate than the compression cartridges widely used in the industry. In this design, 2 ceramic discs fit together to create a watertight seal when closed. This removes the need for a rubber seat washer, which is one of the most frequently replaced parts on a faucet. A set of 1/2" NPT inlets make it easy to connect it to your facility's water lines.
6" Add-On Faucet
This is a wall-mounted faucet, and it comes with 8" adjustable centers that line up with your sink or mounting surface centers to make installation easy. This unit also comes with a 6" add-on swivel faucet, for times when you need a normal faucet instead of a spray valve. It is perfect for filling up sink compartments or washing small hand tools, and is also great for mixing up cleaning solutions in sanitation pails.
Questions & Answers
Looking For Specific Info? Get quick answers to product questions with our AI-powered search.
By using this AI-powered search, you agree to our Terms of UseOpens in new tab and Privacy PolicyOpens in new tab.
Frequently Asked Questions From Customers
Can I use this product to serve drinking water?
This product is not intended for use in applications where potable (drinking) water is dispensed for human consumption.
Does this item have any additional agency approvals and certifications?
There are a wide range of regulations that govern plumbing code! We attempt to list any current certification marks with an official logo on the product page for your convenience. However, additional approvals, codes, and standards this product adheres to may be listed on the product specsheet.
What measurements do I need to install a faucet?
When installing a faucet, these are some of the most common measurements you’ll need:
Faucet Centers: If your faucet has a base with 2 inlets, measure the distance from the center of one inlet to the center of the other. This number must match the spacing of your building’s water lines (adjustable centers will help with the spacing). If mounting through the backsplash on a sink, the center measurement must also fit within the pre-drilled mounting holes.
Flex Hoses: If your faucet has flex hoses make sure that they will reach your building’s water lines.
Spout length: Make sure that the faucet spout will fit comfortably over your sink bowl and not extend too far / not far enough. If you plan to use a swing spout over a multi-bowl sink, make sure it will reach all of the bowls.
Faucet Centers: If your faucet has a base with 2 inlets, measure the distance from the center of one inlet to the center of the other. This number must match the spacing of your building’s water lines (adjustable centers will help with the spacing). If mounting through the backsplash on a sink, the center measurement must also fit within the pre-drilled mounting holes.
Flex Hoses: If your faucet has flex hoses make sure that they will reach your building’s water lines.
Spout length: Make sure that the faucet spout will fit comfortably over your sink bowl and not extend too far / not far enough. If you plan to use a swing spout over a multi-bowl sink, make sure it will reach all of the bowls.
What parts do I need to install my new faucet?
For both wall and deck mounted faucets, installation kits are sold separately. Check the Works With items to find the proper installation kits and parts!
Overall Dimensions:
- Hose Length:
- 108 Inches
- Add-On Faucet:
- 6 Inches
- Faucet Centers:
- 8 Inches
Attention CA Residents:Need Parts & Accessories?
Shop replacement parts and accessories for this item today!
Resources and Downloads
A PDF viewer is required to view this product's information. Download Adobe Acrobat softwareOpens in new tab
Customer Reviews
Frequently Mentioned
- bought
- installation
- kit
- need
- sepeartely