Everpure FE4620YYAB Endurance TKO Cartridge - .65 Micron and 15 GPM
- For use with high volume water-fed equipment
- Extends the life of your primary filter
- Perfect for reducing high volumes of sediments, dirt, and rust
- 15 GPM flow rate and .65 micron rating
- 10-100 PSI pressure requirement
Everpure EV9437-30 Endurance High Flow Twin Water Filtration System with Pre-Filter and Scale Reduction - .2 Micron and 7.5 GPM
Everpure EV9437-31 Endurance High Flow Triple Water Filtration System with Pre-Filter and Scale Reduction - .2 Micron and 11.25 GPM
Everpure EV9437-32 Endurance High Flow Quad Water Filtration System with Pre-Filter and Scale Reduction - .2 Micron and 15 GPM
Everpure EV9437-50 Endurance TKO Microfilter Pretreatment System - .65 Micron and 15 GPM
|Width||4 5/8 Inches|
|Height||20 5/16 Inches|
|Maximum Pressure||100 PSI|
|Micron Rating||.65 Microns|
|Service Flow Rate||15 GPM|
Powerfully block out sediments that can damage your primary filter with this Everpure FE4620YYAB Endurance TKO cartridge! Using a specially formulated, pleated design, this cartridge filters out dirt, sediments, and rust particles to extend the life of your primary filter cartridge. With 12 times the surface area than traditional 20" prefilter cartridges and a staggeringly low .65 micron rating, this cartridge can capture even the finest of debris to protect the water being fed to your appliances.
Ideal for use with high volume applications, this cartridge has a flow rate of 15 GPM, guaranteeing a consistent flow without sacrificing cleanliness. And, swapping out this cartridge for another is quick, easy, and sanitary, because it simply drops into the compatible filter bowl.
Width: 4 5/8"
Height: 20 5/16"
A PDF viewer is required to view this product's information. Download Adobe Acrobat software
Get paid to review this product!