Ships free with Plus

Earn up to $10.95 back (1,095 points)with a Webstaurant Rewards Visa® Credit Card

Quick Shipping

Usually ships in 1 business day

Product Overview

  • Hands-free design reduces the risk of germs spreading
  • 6 3/8" long x 10 3/4" tall gooseneck spout
  • 0.5 GPM non-aerated spray device
  • 1 mounting hole, single inlet
  • Control box, mixing valve, and (3) supply hoses to connect faucet and water lines
UPC Code:671262742450

T&S Brass and Bronze Works 5EF-1D-WG-VF05 Specs

Shipping Weight
6 lb.
Spout Length
6 3/8 Inches
Faucet Width
2 1/16 Inches
Faucet Height
9 3/8 Inches
Faucet Centers
ADA Compliant  Flex Inlets Included  Hands Free  Motion Sensor  With Mixing Valve
Flow Rate
0.5 GPM
Mounting Holes Required
1 Mounting Hole
Mounting Style
Wall Mounted
Plug Type
NEMA 1-15P
Pressure Rating
125 PSI
Spout Clearance
4 7/8 Inches
Spout Type
Temperature Rating
140 Degrees Fahrenheit
Touchless Faucets
Water Inlet Size
3/8 Inches

Customer questions about this product

Can I use this product to serve drinking water?

This product is not intended for use in applications where potable (drinking) water is dispensed for human consumption.

Does this item have any additional agency approvals and certifications?

There are a wide range of regulations that govern plumbing code! We attempt to list any current certification marks with an official logo on the product page for your convenience. However, additional approvals, codes, and standards this product adheres to may be listed on the product specsheet.

What measurements do I need to install a faucet?

When installing a faucet, these are some of the most common measurements you’ll need:

Faucet Centers: If your faucet has a base with 2 inlets, measure the distance from the center of one inlet to the center of the other. This number must match the spacing of your building’s water lines (adjustable centers will help with the spacing). If mounting through the backsplash on a sink, the center measurement must also fit within the pre-drilled mounting holes.

Flex Hoses: If your faucet has flex hoses make sure that they will reach your building’s water lines.

Spout length: Make sure that the faucet spout will fit comfortably over your sink bowl and not extend too far / not far enough. If you plan to use a swing spout over a multi-bowl sink, make sure it will reach all of the bowls.

Ask your own question!

T&S Brass and Bronze Works 5EF-1D-WG-VF05 Details

This ADA Compliant Equip by T&S 5EF-1D-WG-VF05 wall mounted electronic faucet has a reliable 10 3/4" high rigid gooseneck spout with a 6 3/8" length and 2.2 GPM vandal resistant outlet, making it ideal for correctional institutions or any other location where tampering may be an issue. The unit also includes an optional 0.5 GPM spray device to increase your water savings even more!

The faucet's electronic sensor is designed to help conserve water while reducing cross-contamination and the length of germs and bacteria thanks to its hands free operation. The mechanical temperature control mixing valve allows you to set the faucet to maintain a desired water temperature up to 120 degrees Fahrenheit.

The 5EF-1D-WG-VF05 comes complete with a water resistant control module box that is AC or DC operated, with the option to use four AA batteries as backup. Requiring a 1 1/8" cutout for installation, this unit includes two 18" flexible stainless steel hoses with 1/2" NPSM female inlets to connect to your water supply.

Overall Dimensions:
Spout Length: 6 3/8"
Faucet Height: 9 3/8"
Faucet Width: 2 1/16"

Attention CA Residents:

Attention CA Residents

WARNING:This product can expose you to chemicals including lead, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.

  • Hands-Free/Touchless


    This item is designed for hands-free use, which reduces the risk of cross-contamination and prevents germs from spreading.

  • ADA Compliant

    ADA Compliant

    This item meets criteria established by the Americans with Disabilities Act (ADA).

  • NSF/ANSI/CAN 61 (Certified by CSA)

    NSF/ANSI/CAN 61 (Certified by CSA)

    This item is certified by CSA to meet the drinking water system component standards for Canada and the United States outlined in NSF/ANSI/CAN 61.

  • NSF/ANSI/CAN 372 (Certified by CSA)

    NSF/ANSI/CAN 372 (Certified by CSA)

    This item is certified by CSA to meet the drinking water system component lead content standards for Canada and the United States outlined in NSF/ANSI/CAN 372.

  • 1-15P


    This unit comes with a NEMA 1-15P plug.

  • 3/8" Water Connection

    3/8" Water Connection

    This unit comes with a 3/8" water connection for water supply.