Eagle Group SDTL-48-16/4 48" Left Side 16 Gauge 430 Series Stainless Steel Soil Dish Table with Scrap Block
Other Available Sizes:
- Designed to be used on the soil side of a dish washing station
- Provides additional space for loading dish racks
- Made of 16 gauge type 430 stainless steel
- Connects to the left side of a dishmachine
- 3" upturn with 1 1/2" raised rolled rim on the front and end to aid with drainage; 8" backsplash
- Comes with a built-in scrap block
- Built-in 20" x 20" x 5" pre-rinse sink
- Supplied with a hole for a deck mounted pre-rinse faucet (sold separately)
"You May Also Need" items are guaranteed to work with the item you are viewing, such as lids that will fit a cup or casters that will fit a piece of equipment. If an item is not listed in this section, we do not guarantee that it will work with the product you are viewing and do not recommend that you purchase them for use together.
Eagle Group 301124 20 3/4" x 18 3/4" Rack Slide
Eagle Group 301630 19 3/8" x 19 3/8" Pre-Rinse Scrap Basket
Eagle Group 606434 19 1/2" x 17 1/2" Pre-Rinse Basket with Slide Bar
Eagle Group 305428 20" x 20" Sink Bowl Cover
Eagle Group 605372 36" x 24 1/8" Galvanized Steel Dishtable Undershelf
Eagle Group 605375 36" x 24 1/8" 400 Stainless Steel Dishtable Undershelf
Eagle Group 606480 36" x 24 1/8" 300 Stainless Steel Dishtable Undershelf
Eagle Group 311772 Stainless Steel H Leg Set
|Eagle Group SDTL-48-16/4 Specs|
|Height||42 1/2 - 43 1/2 Inches|
|Bowl Depth||5 Inches|
|Backsplash Height||8 Inches|
|Work Surface Height||34 1/2 - 35 1/2 Inches|
|Bowl Front to Back||20 Inches|
|Bowl Left to Right||20 Inches|
|Installation Type||Left Side|
|Leg Construction||Galvanized Steel|
|Made in America||Yes|
|Number of Compartments||1|
|Stainless Steel Type||Type 430|
|Type||Dirty / Soiled Dishtables|
Customer questions about this product
- How can I be sure that this dish table is compatible with my commercial dish machine?
- To verify the compatibility of this dish table with your unit, please provide the following pieces of information to our Special Orders team:
Dish Machine Brand: This is the name of the manufacturer of your dish machine, such as CMA, Jackson, Hobart, etc.
Model Number: The placement of this information will vary by manufacturer, but it is often located in product literature (manuals or specification sheets) and/or somewhere on the unit.
Please note that some dish tables must be modified to ensure that they will fit with certain brands of dish machines. Occasionally, this service will require an upcharge depending on what modifications need to be made.
Eagle Group SDTL-48-16/4 Details
Provide plenty of space to rinse china and glassware, remove scraps, and load warewashing racks by adding this Eagle Group SDTL-48-16/4 48" left side stainless steel soil dish table to your warewashing system. This table is made of 16 gauge type 430 stainless steel for long-lasting durability and has a built-in 20" x 20" x 5" pre-rinse sink punched for a standard basket drain. Plus, this unit is supplied with a hole for the installation of a pre-rinse faucet (sold separately).
To aid in scraping plates and dishes, this dishtable comes standard with a scrap block. It also has an 8" backsplash to protect your walls from water damage and impact from warewashing racks and a 3" upturn on the sides to help contain excess water that drips from your dishes. The smooth 1 1/2" rounded edge helps to make this table safer for employee use since it eliminates sharp corners and edges.
This dish table has a straight design and is made to connect to the left side of your dishmachine. This means that the lip to connect this table to the dish machine is on the right-hand side while the legs are on the left-hand side. The 1 5/8" diameter galvanized legs come equipped with welded cross-bracing to provide additional support for heavily loaded dish racks and adjustable non-marking bullet feet so that you can level this table on an uneven floor. Each foot has 1" of adjustability.
Left to Right: 48"
Front to Back: 30"
Height: 42 1/2" to 43 1/2"
Height (without backsplash): 34 1/2" to 35 1/2"
Left to Right: 20"
Front to Back: 20"
This item is made-to-order and cannot be canceled or returned once your order is placed. Please contact Customer Solutions prior to placing your order if you have any questions or concerns.
Because this item is not stocked in our warehouse, processing, transit times and stock availability will vary. If you need your items by a certain date,
please contact us prior to placing your order. Expedited shipping availability may vary. We cannot guarantee that this item can be cancelled off of the order or returned once it is placed.
Made in America
This item was made in the United States of America.
This item meets the standards imposed by NSF International, which focuses on public safety, health, and the environment.
Other Products from this Line
Get paid to review this product!