$8,142.00/Each

This product is no longer available. We've left this page up for reference only.

Usually Ships in 2-3 Months from manufacturer

Lead times vary based on manufacturer stock

Product Overview

  • Tested to perform in ambient temperatures of 100 degrees Fahrenheit
  • 900 lb. weight capacity
  • Lifetime warranty on drawers and drawer slides
  • Features a smooth, flat top without a lip
  • Exterior digital thermometer helps you monitor a safe cold-holding temperature
  • Durable, easy-to-clean stainless steel exterior
  • Uses environmentally-friendly R-134a refrigerant
  • 115V, 1/5 hp
UPC Code:400012825330

Beverage-Air WTRCS72D-1-FLT Specs

Quantity
1/Each
Shipping Weight
569 lb.
Width
72 Inches
Depth
32 Inches
Height
26 5/8 Inches
Hertz
60 Hertz
Phase
1 Phase
Voltage
115 Volts
Access Type
Drawers
Base Style
Refrigerator
Capacity
17.5 cu. ft. 2 Full Size Food Pans
Compressor Location
Side Mounted
Construction
Stainless Steel
Features
Made in America
Horsepower
1/5 HP
Number of Drawers
4 Drawers
Plug Type
NEMA 5-15P
Refrigerant Type
R-134a
Temperature Range
36 - 38 Degrees F
Top Capacity
900 lb.
Top Style
Flat
Type
Chef Bases

Customer questions about this product

Does Beverage-Air warrant this item for use in a food truck?

This item is covered under Beverage-Air's warranty contingent upon the unit being kept in a controlled climate. This means that the interior of the food truck may not be susceptible to extreme high or low temperatures. If warranty service is required, the truck must be able to sit stationary for 24-48 hours to allow for a technician to service the equipment.

What does the “H” or “HC” mean in the newer Beverage-Air model numbers?

This is a representation that the unit is using a “Hydrocarbon” refrigerant. This would include both R290 and R600a refrigerants. They are being used as an eco-friendly refrigerant by Beverage-Air in response to the EPA’s Significant New Alternatives Policy (SNAP) Program. Read more about this program in our blog post on Refrigerant Regulations.

Ask your own question!

Beverage-Air WTRCS72D-1-FLT Details

This Beverage Air WTRCS72D-1-FLT 72" refrigerated chef base is a space-saving solution in your busy commercial kitchen! This chef base makes it easy to increase efficiency by placing countertop cooking equipment right on top of the chef base where you store your cold ingredients. To maximize the space in your kitchen, chef bases can be used to replace equipment stands in order to utilize the otherwise limited space below stands and tables.

This base features a heavy-duty work top with a 900 lb. weight capacity. The work top is made of insulated 16 gauge stainless steel to help minimize heat transfer to the inside of the cabinet and provides ample space for countertop cooking equipment like fryers, griddles, or charbroilers. The smooth, flat top doesn't have a lip to make cleaning easy and allow heavy items to easily slide on and off.

The chef base's 12 gauge drawers can each hold up to (2) full size food pans. Because chef bases can accommodate a variety of cooking equipment, you can arrange meats, cheeses, and vegetables in the drawers so you have everything you need to prepare cheese steaks, hamburgers, and breakfast sandwiches!

This chef base has a powerful 1/5 hp compressor that uses R-134a refrigerant to maintain a temperature range of 36 to 38 degrees Fahrenheit. The CFC-free polyurethane insulation helps increase the overall energy efficiency and structural integrity of this unit for a long-lasting addition to your kitchen. Overall, this unit is certified for a 100-degree Fahrenheit ambient class. Heavy-duty 6" casters allow for easy maneuverability and cleaning. This unit requires a 115V electrical connection.

Overall Dimensions:
Width: 72"
Depth: 32"
Height: 26 5/8"
Capacity: 17.5 cu. ft.
Weight Capacity: 900 lb.

Attention CA Residents:

Attention CA Residents

WARNING:This product can expose you to chemicals including lead, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.

  • Made in America

    Made in America

    This item was made in the United States of America.

  • UL Classified EPH

    UL Classified EPH

    This product has been certified by the Underwriters Laboratories (UL) to meet applicable ANSI/NSF standards and / or other food equipment hygiene codes and requirements.

  • 5-15P

    5-15P

    This unit comes with a NEMA 5-15P plug.

  • UL Listed, US & Canada

    UL Listed, US & Canada

    This product has been certified by the Underwriters Laboratories (UL) to meet applicable safety standards required for use in the United States and Canada.

  • UL Listed, US

    UL Listed, US

    This product has been certified by the Underwriters Laboratories (UL) to meet applicable safety standards required for use in the United States.

Need Parts & Accessories?

Show replacement parts and accessories for Beverage-Air WTRCS72D-1-FLT today!

Resources and Downloads for
Beverage-Air WTRCS72D-1-FLT

A PDF viewer is required to view this product's information. Download Adobe Acrobat software

Warranty Info

Note: Beverage Air equipment purchased in 2013 or later will have a 3 year parts and labor warranty. Equipment purchased prior to 2013 will have a 1 year parts and labor warranty. RESIDENTIAL USERS: Your warranty will be voided if installed in non-commercial or residential applications.