$4,102.00/Each

Contact us for details

Ships free with Plus

Call 717-392-7472(Mon - Thur: 5am - 12am EST
Fri: 5am - 8pm EST
Sat & Sun: 9am - 4pm EST)

Why do we do this?

Due to a manufacturer's price increase, this price will increase by 3.00% on 01/01/25

Earn up to $123.06 back (12,306 points)with a Webstaurant Rewards Visa® Credit Card

Style: Left Hinged

Installation Services

Check if installation is currently available for your area.

Usually Ships in 4 Weeks from manufacturer

Lead times vary based on manufacturer stock

Product Overview

  • Non-refrigerated top rail holds (7) 10" deep jars (sold separately)
  • Airflow ensures product in open containers is kept below 41 degrees Fahrenheit and above freezing
  • Stainless steel front, sides, top, door, and grille with a corrosion-resistant aluminum interior
  • Solid self-closing door features a 120-degree stay-open feature
  • Uses eco-friendly R-290 refrigerant; 1/10 hp, 115V
UPC Code:400016341492

Beverage-Air TPE27HC-6P-7R-24 Specs

Quantity
1/Each
Shipping Weight
202 lb.
Width
27 Inches
Depth
31 Inches
Height
45 1/8 Inches
Interior Width
23 Inches
Nominal Width
27 Inches
Interior Depth
23 1/2 Inches
Interior Height
23 Inches
Work Surface Height
35 5/8 Inches
Amps
2 Amps
Hertz
60 Hz
Phase
1 Phase
Voltage
115 Volts
1/9 Size Pan Capacity
6 Pans
Access Type
Doors
Capacity
6.9 cu. ft.
Casters
With Casters
Color
Silver
Compressor Location
Rear Mounted
Compressor Style
Side / Rear Breathing
Construction
Stainless Steel and Aluminum
Door Style
Swing
Door Type
Solid
Exterior Material
Stainless Steel
Features
Made in America  Self-Closing Doors
Hinge Location
Left
Horsepower
1/10 HP
Installation Type
Freestanding
Number of Doors
1 Door
Number of Shelves
2 Shelves
Plug Type
NEMA 5-15P
Refrigerant Type
R-290
Refrigeration Type
Air Cooled
Style
Counter Height
Temperature Range
32 - 41 Degrees F
Top Type
Top Rail
Type
Prep Refrigeration

Beverage-Air TPE27HC-6P-7R-24 Details

The Beverage-Air TPE27HC-6P-7R-24 Hydrocarbon series 27" 1 door refrigerated sandwich prep table is designed to keep your freshest toppings and ingredients close at hand at food-safe holding temperatures. The non-refrigerated top rail holds (7) 10" deep jars (sold separately), while the bottom section holds (6) 1/9 size 4" deep food pans (sold separately). For additional refrigerated storage space, two epoxy-coated steel wire shelves are included for the cabinet.

This particular unit provides 6.9 cu. ft. of storage space. To prevent the inevitable spill or leak from damaging the interior, the interior liner is made of corrosion-resistant aluminum, which helps preserve the unit's integrity through the years. On the exterior, this unit features stainless steel front, sides, top, door, and grille with a galvanized back and bottom. The solid self-closing door is on cartridge style hinges and features a 120-degree stay-open feature for easy loading and unloading. The door also has a painted aluminum door handle, it features a left hinge, and the unit includes snap-in magnetic gaskets to tightly seal shut the door.

This prep table's refrigeration system uses a 1/10 hp compressor and adheres to strict environmental regulations by circulating R-290 refrigerant. This specialty refrigerant boasts an ozone depletion potential (ODP) of 0 and a global warming potential (GWP) of 3, making it an environmentally-responsible choice for your business. It features an adaptive defrost, while its airflow ensures your product kept in open containers is kept below 41 degrees Fahrenheit and above freezing. The (4) 6" casters (two locking) allow you to roll the unit aside for cleaning or service, and the unit comes with an 8' long detachable cord. A 115V electrical connection is required for operation.

Overall Dimensions:
Width: 27"
Depth: 31"
Height: 45 1/8"
Capacity: 6.9 cu. ft.

Interior Dimensions:
Width: 23"
Depth: 23 1/2"
Height: 23"

This Item Ships via Common Carrier. For more information and tips to help your delivery go smoothly, click here.

Because this item is not stocked in our warehouse, processing, transit times and stock availability will vary. If you need your items by a certain date, please contact us prior to placing your order. Expedited shipping availability may vary. We cannot guarantee that this item can be cancelled off of the order or returned once it is placed.

Attention CA Residents:

Customer questions about this product

Does Beverage-Air warrant this item for use in a food truck?

This item is covered under Beverage-Air's warranty contingent upon the unit being kept in a controlled climate. This means that the interior of the food truck may not be susceptible to extreme high or low temperatures. If warranty service is required, the truck must be able to sit stationary for 24-48 hours to allow for a technician to service the equipment.

How do I know if this unit will fit under or match the height of my ADA-height counter?

Many manufacturers offer their refrigeration equipment in several different height options to best meet your needs. Here's a breakdown of how we classify these different heights:

Counter Height: Work surface is more than 34" high; standard-height unit.

ADA Height: Work surface height is 34" or less; complies with ADA regulations.

Low Profile: Work surface height is less than 32"; designed to fit under most ADA-height counters.

If the unit you are purchasing does not have a flat top, such as a worktop or sandwich/salad prep table, it may affect whether or not it will align with certain countertops. To ensure that the product will meet your needs, please reference the product's literature and specifications.

I haven’t heard of R-290, R-600a, R-513a, or R-448A refrigerant before. What is it?

R-290 (also known as high purity propane or CARE 40) and R-600a (also known as refrigerant grade Isobutane or CARE 10) are hydrocarbon refrigerants. R513a (also known as Opteon XP10) and R-448A (also known as Solstice N40) are HFO (hydrofluoroolefin) refrigerants. They are being used by some manufacturers in response to the EPA’s Significant New Alternatives Policy (SNAP) Program.

What does the “H” or “HC” mean in the newer Beverage-Air model numbers?

This is a representation that the unit is using a “Hydrocarbon” refrigerant. This would include both R290 and R600a refrigerants. They are being used as an eco-friendly refrigerant by Beverage-Air in response to the EPA’s Significant New Alternatives Policy (SNAP) Program. Read more about this program in our blog post on Refrigerant Regulations.

What kinds of pans can I use in my refrigerated prep table?

While various configurations combining traditional 1/3 size, 1/6 size, and other food pan sizes are possible, it's important to refer to your equipment's Specification Sheet and/or Owner's Manual to see what pan sizes and configurations are recommended. Certain accessories may be needed in order to use pans of a different size than what is recommended. It is also important to note that mixing and matching pans from different manufacturers may result in the pans not fitting properly.
Ask your own question!
  • UL Listed, US & Canada

    UL Listed, US & Canada

    This product has been certified by the Underwriters Laboratories (UL) to meet applicable safety standards required for use in the United States and Canada.

  • UL Classified EPH

    UL Classified EPH

    This product has been certified by the Underwriters Laboratories (UL) to meet applicable ANSI/NSF standards and / or other food equipment hygiene codes and requirements.

  • UL Sanitation

    UL Sanitation

    This item has been tested and meets the sanitation hazard standards imposed by the Underwriters Laboratories (UL).

  • 5-15P

    5-15P

    This unit comes with a NEMA 5-15P plug.

  • Made in America

    Made in America

    This item was made in the United States of America.

Resources and Downloads for
Beverage-Air TPE27HC-6P-7R-24

A PDF viewer is required to view this product's information. Download Adobe Acrobat software

Warranty Info

Note: Beverage Air equipment purchased in 2013 or later will have a 3 year parts and labor warranty. Equipment purchased prior to 2013 will have a 1 year parts and labor warranty. RESIDENTIAL USERS: Your warranty will be voided if installed in non-commercial or residential applications.