$7,179.00/Each

Contact us for details

Ships free with Plus

Call 717-392-7472(Mon - Thur: 5am - 12am EST
Fri: 5am - 8pm EST
Sat & Sun: 9am - 4pm EST)

Why do we do this?

Earn up to $215.37 back (21,537 points)with a Webstaurant Rewards Visa® Credit Card

Installation Services

Check if installation is currently available for your area.

Enter ZIP Code >

Usually Ships in 4 Weeks from manufacturer

Lead times vary based on manufacturer stock

Not eligible for expedited shipping

Product Overview

  • (10) 1/6 size pans included
  • Includes a 10" wide cutting board
  • Stainless steel front, sides, top, door, drawers, and grille 
  • Cabinet features foamed-in-place polyurethane insulation
  • 1/3 hp; 115V; runs on R290 eco-friendly refrigerant
UPC Code:400010806348

Beverage-Air SPED72HC-10-4 Specs

Quantity
1/Each
Shipping Weight
425 lb.
Width
72 Inches
Depth
31 1/4 Inches
Height
41 11/16 Inches
Nominal Width
72 Inches
Amps
9.6 Amps
Hertz
60 Hertz
Phase
1 Phase
Voltage
115 Volts
1/6 Size Pan Capacity
10 Pans
Access Type
Doors and Drawers
Capacity
21.5 cu. ft.
Casters
With Casters
Compressor Location
Bottom Mounted
Compressor Style
Side / Rear Breathing
Construction
Stainless Steel and Aluminum
Door Style
Swing
Door Type
Solid
Features
Made in America
Horsepower
1/3 HP
Number of 1/6 Size Pans Included
10 Pans
Number of Doors
1 Door
Number of Drawers
4 Drawers
Number of Shelves
1 Shelf
Plug Type
NEMA 5-15P
Refrigerant Type
R-290
Refrigeration Type
Air Cooled
Style
Counter Height
Temperature Range
33 - 40 Degrees F
Top Type
Standard Top

Customer questions about this product

Does Beverage-Air warrant this item for use in a food truck?

This item is covered under Beverage-Air's warranty contingent upon the unit being kept in a controlled climate. This means that the interior of the food truck may not be susceptible to extreme high or low temperatures. If warranty service is required, the truck must be able to sit stationary for 24-48 hours to allow for a technician to service the equipment.

How do I know if this unit will fit under or match the height of my ADA-height counter?

Many manufacturers offer their refrigeration equipment in several different height options to best meet your needs. Here's a breakdown of how we classify these different heights:

Counter Height: Work surface is more than 34" high; standard-height unit.

ADA Height: Work surface height is 34" or less; complies with ADA regulations.

Low Profile: Work surface height is less than 32"; designed to fit under most ADA-height counters.

If the unit you are purchasing does not have a flat top, such as a worktop or sandwich/salad prep table, it may affect whether or not it will align with certain countertops. To ensure that the product will meet your needs, please reference the product's literature and specifications.

What does the “H” or “HC” mean in the newer Beverage-Air model numbers?

This is a representation that the unit is using a “Hydrocarbon” refrigerant. This would include both R290 and R600a refrigerants. They are being used as an eco-friendly refrigerant by Beverage-Air in response to the EPA’s Significant New Alternatives Policy (SNAP) Program. Read more about this program in our blog post on Refrigerant Regulations.

What kinds of pans can I use in my refrigerated prep table?

While various configurations combining traditional 1/3 size, 1/6 size, and other food pan sizes are possible, it's important to refer to your equipment's Specification Sheet and/or Owner's Manual to see what pan sizes and configurations are recommended. Certain accessories may be needed in order to use pans of a different size than what is recommended. It is also important to note that mixing and matching pans from different manufacturers may result in the pans not fitting properly.

Ask your own question!

Beverage-Air SPED72HC-10-4 Details

The Beverage-Air SPED72HC-10-4 72" one door, four drawer sandwich / salad prep table provides plenty of room to prepare your freshest salads, sandwiches, and more! Its high-capacity refrigeration system boasts an optimized airflow pattern that cools the pans from the bottom for even temperature distribution and improved performance. A stainless steel front, sides, top, drawers, and grille ensure years of dependable performance. The door section provides additional storage space for backup toppings and ingredients, and comes with two epoxy-coated steel wire shelves. Plus, the right side of the unit offers additional counter space to extend your prep area even further. You can use the extra space to store your slicer, blender, or vegetable chopper so everything is conveniently in one place!

- 10" wide polyethylene cutting board provides convenient work space and is removable for easy cleaning

- (10) 1/6 size, 4" deep polycarbonate food pans included for top section

- Top drawers each 4" deep food pans; bottom drawers hold 6" deep food pans (sold separately)

- Door section has stay-open, self-closing design and comes with two epoxy-coated wire shelves

- Cabinet insulated with CFC-free foamed-in-place polyurethane insulation for energy efficiency

- 1/3 hp compressor and R-290 refrigerant maintain food safe holding temperatures

- Heavy-duty 6" casters (2 locking), stainless steel top, sides, drawers, and front grille

- Corrosion-resistant aluminum interior liner

- Insulated cover

- 21.5 cu. ft. total capacity

- 115V

Overall Dimensions:
Width: 72"
Depth: 31 1/4"
Height: 41 11/16"
Capacity: 21.5 cu. ft.

This Item Ships via Common Carrier. For more information and tips to help your delivery go smoothly, click here.

Because this item is not stocked in our warehouse, processing, transit times and stock availability will vary. If you need your items by a certain date, please contact us prior to placing your order. Expedited shipping availability may vary. We cannot guarantee that this item can be cancelled off of the order or returned once it is placed.

Attention CA Residents:

  • Made in America

    Made in America

    This item was made in the United States of America.

  • UL Classified EPH

    UL Classified EPH

    This product has been certified by the Underwriters Laboratories (UL) to meet applicable ANSI/NSF standards and / or other food equipment hygiene codes and requirements.

  • UL Sanitation

    UL Sanitation

    This item has been tested and meets the sanitation hazard standards imposed by the Underwriters Laboratories (UL).

  • UL Listed, US

    UL Listed, US

    This product has been certified by the Underwriters Laboratories (UL) to meet applicable safety standards required for use in the United States.

  • 5-15P

    5-15P

    This unit comes with a NEMA 5-15P plug.

  • UL Classified, US & Canada

    UL Classified, US & Canada

    This product has been certified by the Underwriters Laboratories (UL) for safe use against a limited range of hazards or usage conditions, within applicable safety standards required for safe use in the United States and Canada.

Resources and Downloads for
Beverage-Air SPED72HC-10-4

A PDF viewer is required to view this product's information. Download Adobe Acrobat software

Warranty Info

Note: Beverage Air equipment purchased in 2013 or later will have a 3 year parts and labor warranty. Equipment purchased prior to 2013 will have a 1 year parts and labor warranty. RESIDENTIAL USERS: Your warranty will be voided if installed in non-commercial or residential applications.

Customer Reviews

Overall User Rating

Not Rated

0 reviews rated this 5 out of 5 stars.

0 reviews rated this 4 out of 5 stars.

0 reviews rated this 3 out of 5 stars.

0 reviews rated this 2 out of 5 stars.

0 reviews rated this 1 out of 5 stars.

Customer Photos & Videos

Beverage-Air Customer Review from