$414.99/Each

Ships free with Plus

Earn up to $12.45 back (1,245 points)with a Webstaurant Rewards Visa® Credit Card

Special Order Shipping

An estimated delivery date will be provided after placing the order

Product Overview

  • Comes with (4) 5 lb. bags
  • Designed specifically for MTI-40E ventless fryers
  • One year supply of charcoal
  • Easy to swap out
  • Should be changed every 3 months
UPC Code:400016165623

AutoFry 60-0012 Specs

Quantity
1/Each
Shipping Weight
23 lb.
Capacity
5 Inches
Features
Made in America
Type
Filter System Parts  Mechanical Parts  Ventless Hood Filters

AutoFry 60-0012 Details

Ensure that your AutoFry ventless fryer is operating with maximum efficiency by regularly replacing the charcoal within the filter of your MTI-40E unit. There a (4) five lb. bags of charcoal that come in this pack. Changing out the charcoal is kept simple for the device. First slide out the filter, throw out the old charcoal, clean the filter out lightly, and replace it with one new charcoal bag. It is recommended that charcoal be swapped out every 3 months. The fresh charcoal will significantly minimize harmful smoke odors and toxins without the costly expense of hood or vents!

Overall Dimensions:
Capacity: 5 lb.

Because this item is not stocked in our warehouse, processing, transit times and stock availability will vary. If you need your items by a certain date, please contact us prior to placing your order. Expedited shipping availability may vary. We cannot guarantee that this item can be cancelled off of the order or returned once it is placed.

At checkout, you will be prompted to provide the model and serial number for this item. While omitting this information will not prevent you from placing your order, we may need to contact you afterward to obtain it and complete your shipment as the manufacturer requires this information. Providing this information at checkout will help ensure your order is processed smoothly. We cannot guarantee that such information will be used to verify compatibility with your model. Please use resources such as the Compatible Models table on our product pages, a service technician, and/or relevant product literature to ensure compatibility before ordering.

Attention CA Residents:

Customer questions about this product

How do I know which side is the "height" and which side is the "width" of my hood filter?

The "height" side runs parallel to the baffles from top to bottom, while the "width" side is the left-to-right measurement. Like this:

Exhaust Hood Filter Measurements

Why are my hood filter's measurements a little different than what you have listed?

We list the nominal industry size of each filter on our site. The actual measurements are approximately 1/2" smaller in size.

Why do the baffles run up and down and not side to side?

These run up and down to allow grease to drain. If installed side to side, not only would you risk the handles getting in the way, but you would have grease build up, which is dangerous.
Ask your own question!
  • Made in America

    Made in America

    This item was made in the United States of America.