Usually Ships Same Day Through 4PM EST

Lead times vary based on manufacturer stock

Product Overview

  • For select countertop ventless units
  • Helps maintain safe operation and prevents harm to staff
UPC Code:400012246135
View all Wells Exhaust Hood Filters and Accessories

Works With

Wells WEL2I-302579 Specs

Quantity
1/Each
Shipping Weight
0.5 lb.
Width
20 Inches
Height
16 Inches
Filter Type
Pre-Filter
Thickness
2 Inches
Type
Ventless Hood Filters

Wells WEL2I-302579 Details

For use with your select Wells countertop ventless hood system, this Wells 302579 pre-filter helps to remove grease and smoke from your kitchen so that clean air can be recirculated back in. This item serves as a disposable replacement that should be changed on a regular basis to prolong the life of the main filter in your unit's HEPA filtration system. Protect your staff members from the harmful emissions that kitchen equipment produces by regularly changing your hood system's filter!

Overall Dimensions:
Height: 16
Width: 20"
Thickness: 2"

Because this item is not stocked in our warehouse, processing, transit times and stock availability will vary. If you need your items by a certain date, please contact us prior to placing your order. Expedited shipping availability may vary. We cannot guarantee that this item can be cancelled off of the order or returned once it is placed.

Attention CA Residents:

Customer questions about this product

Can the utility type, serial number, or production date of my equipment affect whether or not this part fits?

Sometimes, factors like the voltage, fuel type, and serial number may determine whether or not a particular part will fit your particular unit. We do our best to provide the most up-to-date information possible on our site but we cannot guarantee that this will clarify every possible scenario. If you require additional confirmation that this part is the correct one for your unit, we recommend consulting manufacturer literature and resources for your equipment to verify the correct part.

How do I know which side is the "height" and which side is the "width" of my hood filter?

The "height" side runs parallel to the baffles from top to bottom, while the "width" side is the left-to-right measurement. Like this:

Exhaust Hood Filter Measurements

Is this an OEM part?

Yes. This is an OEM (Original Equipment Manufacturer) part.

What is the difference between an OEM part and an OEM-equivalent part?

An OEM part is the original component that was made for your equipment.

We also sell parts that are equivalent to OEM products, but are not genuine OEM. Each type has its own merits – these are some things to consider when making the decision between OEM and OEM-equivalent parts:

• Using an OEM part guarantees that you will comply with any valid manufacturer’s warranties and agency approvals on your product. An OEM-equivalent part may or may not offer the same guarantees.

• OEM-equivalent parts are built to the same specifications as the original part and are often available at a lower price point. In some cases it may even be sourced from the same location as the OEM part, though this will vary from item to item.

Why are my hood filter's measurements a little different than what you have listed?

We list the nominal industry size of each filter on our site. The actual measurements are approximately 1/2" smaller in size.

Why do the baffles run up and down and not side to side?

These run up and down to allow grease to drain. If installed side to side, not only would you risk the handles getting in the way, but you would have grease build up, which is dangerous.
Ask your own question!

Resources for
Wells WEL2I-302579

  • Range Hood Filter Types

    • 1 Compatible Model 

    Wells WVU-31CT

    Find Related Products

    16 inch frying pan   16 oz clear plastic bowls   16 oz glasses   16 oz plastic tumblers   20 oz cups   20 qt stand mixer