Waterloo 10" x 14" x 10" 18 Gauge Stainless Steel Three Compartment Drop-In Sink with (2) 10" Swing Faucets

This kit does not include installation hardware for connecting the faucet to the sink, or the sink to your water lines. This is an industry standard practice since every installation situation is unique and the parts needed may vary case to case. However, we have made some common installation components available in the Works With ribbon of this page.

Multi-compartment drop-in sinks are only NSF Approved when used in mobile food carts and kiosks. We recommend checking with your inspector prior to installation to verify that this sink will be permissible in your restaurant.

If you're choosing a drop-in sink, this information should be provided in the specifications for the product. The cutout must be large enough to accommodate the sink bowl(s) but also not bigger than the lip of the sink, which overhangs the cutout and holds it in place.

If you're choosing an undermount sink, the sink will install underneath the counter, so your cutout size should be about the same as the total, combined dimensions of your sink bowl(s) for a clean look. Your countertop must also have a finished edge around the cutout, since top of the bowl installs below the cut, leaving it exposed.