To keep your carpets looking and smelling as good as new, Noble Chemical offers a line of products that are easy to use and highly effective, without breaking the bank.
Start off with spot cleaners like Spot-B-Gone and Gum-B-Gone to eliminate really tough stains and messes. With those out of the way and your floors thoroughly vacuumed, you can begin cleaning your carpet in its entirety.
Our Sierra by Noble Chemical carpet shampoo and carpet shampoo extraction cleaner give you two great ways to clean your carpet, depending on your needs.
The Sierra by Noble Chemical carpet shampoo is a low-moisture solution that dries quickly into a crystalline residue that encases grease and dirt for easy vacuuming. It also has a polymeric retardant that protects against re-soiling to maximize the time between cleanings.
To use, make a solution using 1 part Sierra by Noble Chemical shampoo to 12 parts warm water, or about 10 ounces per gallon. Mop or spray the solution onto the floor, using only what is needed to wet the surface. Thoroughly brush the area with either a rotary or dry foam shampooer, increasing the brushing time for heavily soiled areas. Give the foam time to dry before vacuuming.
The carpet shampoo extraction cleaner gives your carpets a deep cleaning to lift out unavoidable residue like grease, oils, foods, and soils from your carpet's fibers. Plus, it cleans without leaving any residue behind.
This highly concentrated CS3 solution must be diluted prior to use. For general cleaning, add one ounce of concentrate per gallon of water in your machine’s solution tank. Heavily-soiled carpets will require two to three ounces of concentrate per gallon of water, while heavily-soiled traffic lanes should be pre-sprayed with a mixture of one ounce of concentrate per eight ounces of water. Using a hot or cold water extraction machine, apply the solution to your floor while being careful not to over-wet, and then pass over the area a few more times to remove the liquid.
After extraction cleaning, shampooing, or bonnet buffing, be sure to use our Sierra carpet rinse and chemical neutralizer to remove any chemical remnants and leave your carpet smelling fresh. For general rinsing after cleaning, dilute two to three ounces per gallon of water and lightly mist solution over previously cleaned carpets and allow it to air dry. Sierra by Noble Chemical carpet rinse and neutralizer can also be used as a pre-spray to remove chemical build-up on extremely soiled carpets. Dilute two to three ounces per gallon of water in an extraction machine and rinse the carpet.
Whether your carpets are caked in heavy grease and soil or just need periodic maintenance, Sierra by Noble Chemical has the products you need to get the job done.
Keeping your carpets clean is easy with the help of Noble Chemical's line of products, which are affordable and highly effective. Watch this video to learn more!