Universal UNV89000 Lightweight Adjustable Hand Dispenser for Stretch Film Rolls 12" - 18"

Get the products in your warehouse ready for safe transportation by properly film wrapping your pallets. For your convenience, you can use the film dispenser to effortlessly hold and dispense the film while you walk around the pallet. But you can also wrap pallets with the just the film roll! First, secure your film by either tying it to the wooden base, or by wedging the end between two boxes on the pallet. You will want to start wrapping at the very bottom, being sure to cover at least 1” of the wooden pallet, if not more. This secures the product to the base so it doesn’t slide or tip off. This is the most important part of wrapping your pallet. Then, wrap around the base completely at least twice, and for heavier loads you can go around 4 or 5 times for even more stability. While wrapping, hold the film about 10” from your pallet and walk forward. For stretch or pallet film, stretch the film about 30%-50% around the corners, being sure to hold tension in the film to give a tight, secure wrap. Moving up, you will want to have at least 50% overlap from one layer to the next for added strength. Once you reach the top, stretch the film around the top corners and pull slightly downwards, so you secure about an inch of film over the top of your pallet corners. Now that your pallet is securely wrapped, you can count on the safe transportation of your products!