Earn up to $6.14 back (614 points)with a Webstaurant Rewards Visa® Credit Card
- 5 1/4" cast spout
- 2.2 GPM aerator
- Eterna compression cartridges
- Easy-to-use lever handles
- EasyInstall configuration saves time and money
- Shipping Weight
- 7 lb.
- Spout Length
- 5 Inches
- California AB100 Compliant
- Faucet Centers
- 8 Inches
- ADA Compliant
Made in America
- Flow Rate
- 2.2 GPM
- Handle Type
- Maximum Water Temperature
- 140 Degrees F
- Mounting Style
- Deck Mounted
- Spout Type
Customer questions about this product
Does this item have any additional agency approvals and certifications?
There are a wide range of regulations that govern plumbing code! We attempt to list any current certification marks with an official logo on the product page for your convenience. However, additional approvals, codes, and standards this product adheres to may be listed on the product specsheet.
What measurements do I need to install a faucet?
When installing a faucet, these are some of the most common measurements you’ll need:
Faucet Centers: If your faucet has a base with 2 inlets, measure the distance from the center of one inlet to the center of the other. This number must match the spacing of your building’s water lines (adjustable centers will help with the spacing). If mounting through the backsplash on a sink, the center measurement must also fit within the pre-drilled mounting holes.
Flex Hoses: If your faucet has flex hoses make sure that they will reach your building’s water lines.
Spout length: Make sure that the faucet spout will fit comfortably over your sink bowl and not extend too far / not far enough. If you plan to use a swing spout over a multi-bowl sink, make sure it will reach all of the bowls.
Can I use this product to serve drinking water?
This product is not intended for use in applications where potable (drinking) water is dispensed for human consumption.
T&S Brass and Bronze Works B-2990 Details
Easily add a reliable water fixture to your restrooms so employees and guests can maintain cleanliness and sanitation with this T&S B-2990 concealed lavatory faucet! This faucet features 8" centers while a 5 1/4" cast spout offers plenty of room to suds, wash, and rinse hands. A 2.2 GPM aerator delivers a reliable, steady stream of water while also restricting flow for impressive water efficiency. For optimum convenience, this model features a preassembled concealed EasyInstall faucet body that saves up to 50% on labor costs and up to 50% on installation time. The preassembled body eliminates the challenges associated with multiple connections beneath the mounting surface while preventing the side bodies from rotating or becoming misaligned.
This faucet is engineered for maximum durability and uses quarter-turn Eterna cartridges to adjust the flow rate. These cartridges provide excellent longevity thanks to a solid brass spindle and body. When the lever handles of this faucet are turned, the spindle lifts to allow water to pass through. T&S cartridges are designed with efficiency and convenience in mind, allowing you to swap out one piece in the event of a leak, instead of replacing multiple moving parts.
T&S has been providing commercial applications with innovative plumbing solutions for all of their most pressing needs for more than 70 years! Whether a fixture is needed for handwashing stations, potwashing stations, laboratories, glass fillers, or grooming operations, T&S has the reliable products you need for consistent performance that will withstand the rigors of everyday commercial use. Their catalog features everything from faucets to sinks, dipper wells, and virtually any gas or water connection you might need. For unrivaled selection and quality, check out T&S for all of your plumbing needs!
Because this item is not stocked in our warehouse, processing, transit times and stock availability will vary. If you need your items by a certain date, please contact us prior to placing your order. Expedited shipping availability may vary. We cannot guarantee that this item can be cancelled off of the order or returned once it is placed.
This item meets the criteria established by the Americans with Disabilities Act (ADA), helping make your restaurant more accessible to people with disabilities.
NSF/ANSI/CAN 61 (Certified by CSA)
This item is certified by CSA to meet the drinking water system component standards for Canada and the United States outlined in NSF/ANSI/CAN 61.
NSF/ANSI/CAN 372 (Certified by CSA)
This item is certified by CSA to meet the drinking water system component lead content standards for Canada and the United States outlined in NSF/ANSI/CAN 372.
This item meets the standards imposed by the Canadian Standards Association (CSA).
Made in America
This item was made in the United States of America.
Leave a review of this product!
If you've used this product, log in and leave a review to tell us and other customers what you thought about it. Get paid up to $16 for submitting one of the first text, photo, or video reviews for this item. View your account for details.Login or Register