Name: T&S B-2443-VF10 Wall Mounted Vandal Resistant Medical Faucet with 2 7/8" Swivel/Rigid Gooseneck Nozzle, 8" Centers, 1.0 GPM Aerator, Eterna Cartridges, and Wrist Handles
Brand: T&S Brass and Bronze Works
SKU: 510B2443VF10
Price: 253 USD
Availability: LimitedAvailability

A T&S chrome wall mounted medical faucet with two wrist handles and a gooseneck nozzle.

0:00 / 0:00

Note: Representative image shown

$253.00/Each

Ships free with Plus

Why do we do this?

Start a Live Chat with a Customer Service rep to receive the price!
Mon - Thur: 5am - 12am EST
Fri: 5am - 8pm EST
Sat & Sun: 9am - 4pm EST.

Due to a manufacturer's price increase, this price will increase by 5.00% on 01/01/25

Earn up to $7.59 back (759 points)with a Webstaurant Rewards Visa® Credit Card

Usually Ships in 2-3 Weeks from manufacturer

Lead times vary based on manufacturer stock

Product Overview

8" centers
1.0 GPM aerator
Eterna cartridges
1/2" NPT female inlets
Wrist handles

Shipping Restrictions

This item cannot ship to CA

UPC Code:671262770040

View all T&S Brass and Bronze Works Medical Faucets

Quantity: 1/Each
Shipping Weight: 5.7 lb.
Spout Length: 2 7/8 Inches
Faucet Width: 16 Inches
Faucet Height: 9 Inches
Cartridge Type: Compression
Faucet Centers: 8 Inches
Finish: Chrome
Flow Rate: 1 GPM
Handle Type: Wrist
Material: Brass
Mounting Style: Wall Mounted
Mounting Type: Adjustable
Pressure Rating: 20 - 125 PSI
Spout Clearance: 6 Inches
Spout Type: Gooseneck
Temperature Rating: 40 - 140 Degrees F
Type: Faucets
Water Inlet Size: 1/2 Inches

T&S Brass and Bronze Works B-2443-VF10 Details

This T&S B-2443-VF10 wall mounted medical faucet is the perfect solution when you need a reliable water fixture for hand-washing in your facility. It boasts a set of 8" centers for easy installation while its 9" swivel/rigid gooseneck nozzle and 1.0 GPM aerator deliver gentle water flow that's perfect for hand-washing applications.

This faucet is engineered for maximum durability and uses Eterna compression cartridges to control the water flow. These cartridges provide excellent longevity thanks to a solid brass spindle and body. When the wrist handles of this faucet are turned, the cartridge lifts to allow water to pass through. T&S cartridges are designed with efficiency and convenience in mind, allowing you to swap out one piece in the event of a leak, instead of replacing multiple moving parts. Vandal resistant components help prevent tampering with your faucet for added peace of mind.

Overall Dimensions:
Spout Length: 2 7/8"
Faucet Height: 9"
Faucet Width: 16"

Because this item is not stocked in our warehouse, processing, transit times and stock availability will vary. If you need your items by a certain date, please contact us prior to placing your order. Expedited shipping availability may vary. We cannot guarantee that this item can be cancelled off of the order or returned once it is placed.

Attention CA Residents:

Customer questions about this product

Can I use this product to serve drinking water?

This product is not intended for use in applications where potable (drinking) water is dispensed for human consumption.

Does this item have any additional agency approvals and certifications?

There are a wide range of regulations that govern plumbing code! We attempt to list any current certification marks with an official logo on the product page for your convenience. However, additional approvals, codes, and standards this product adheres to may be listed on the product specsheet.

I live in California. Can I purchase this product?

This product cannot be shipped to California.

What measurements do I need to install a faucet?

When installing a faucet, these are some of the most common measurements you’ll need:

Faucet Centers: If your faucet has a base with 2 inlets, measure the distance from the center of one inlet to the center of the other. This number must match the spacing of your building’s water lines (adjustable centers will help with the spacing). If mounting through the backsplash on a sink, the center measurement must also fit within the pre-drilled mounting holes.

Flex Hoses: If your faucet has flex hoses make sure that they will reach your building’s water lines.

Spout length: Make sure that the faucet spout will fit comfortably over your sink bowl and not extend too far / not far enough. If you plan to use a swing spout over a multi-bowl sink, make sure it will reach all of the bowls.

Ask your own question!

ADA Compliant
This item meets criteria established by the Americans with Disabilities Act (ADA).
CSA, Canada
This product has been certified by the Canadian Standards Association (CSA) to meet requirements for electrical, plumbing, and/or mechanical products in Canada.
NSF/ANSI/CAN 61 (Certified by CSA)
This item is certified by CSA to meet the drinking water system component standards for Canada and the United States outlined in NSF/ANSI/CAN 61.
NSF/ANSI/CAN 372 (Certified by CSA)
This item is certified by CSA to meet the drinking water system component lead content standards for Canada and the United States outlined in NSF/ANSI/CAN 372.
EPA WaterSense
This item is certified by the EPA's WaterSense program to meet its standards for water use. WaterSense-labeled products are certified to use at least 20 percent less water, save energy, and perform as well as or better than regular models.
Made in America
This item was made in the United States of America.
1/2" Water Connection
This unit comes with a 1/2" water connection for water supply.