$478.50/Each

Ships free with Plus

or enter your email to be instantly sent the price!

Why do we do this?

Start a Live Chat with a Customer Service rep to receive the price!
Mon - Thur: 5am - 12am EST
Fri: 5am - 8pm EST
Sat & Sun: 9am - 4pm EST.

Due to a manufacturer's price increase, this price will increase by 5.00% on 01/01/25

Earn up to $14.35 back (1,435 points)with a Webstaurant Rewards Visa® Credit Card

Usually Ships in 2-3 Weeks from manufacturer

Lead times vary based on manufacturer stock

Product Overview

  • Protective flange for sheet metal up to .100” thick
UPC Code:671262173018

T&S Brass and Bronze Works B-2346 Specs

Quantity
1/Each
Shipping Weight
10.69 lb.
Hose Length
60 Inches
Spout Length
10 Inches
Faucet Width
16 Inches
Faucet Height
10 3/8 Inches
Cartridge Type
Compression
Faucet Centers
8 Inches
Features
ADA Compliant  Made in America
Finish
Chrome
Flow Rate
5.6 GPM
Handle Type
Wrist
Material
Brass
Mounting Style
Deck Mounted
Mounting Type
Workboard
Rough In
8 Inches
Spout Clearance
5 1/2 Inches
Spout Type
Vacuum Breaker
Sprayer
With Sprayer
Temperature Rating
140 Degrees F
Type
Faucets
Water Inlet Size
1/2 Inches

Customer questions about this product

Does this item have any additional agency approvals and certifications?

There are a wide range of regulations that govern plumbing code! We attempt to list any current certification marks with an official logo on the product page for your convenience. However, additional approvals, codes, and standards this product adheres to may be listed on the product specsheet.

What measurements do I need to install a faucet?

When installing a faucet, these are some of the most common measurements you’ll need:

Faucet Centers: If your faucet has a base with 2 inlets, measure the distance from the center of one inlet to the center of the other. This number must match the spacing of your building’s water lines (adjustable centers will help with the spacing). If mounting through the backsplash on a sink, the center measurement must also fit within the pre-drilled mounting holes.

Flex Hoses: If your faucet has flex hoses make sure that they will reach your building’s water lines.

Spout length: Make sure that the faucet spout will fit comfortably over your sink bowl and not extend too far / not far enough. If you plan to use a swing spout over a multi-bowl sink, make sure it will reach all of the bowls.
Ask your own question!

T&S Brass and Bronze Works B-2346 Details

This ADA Compliant T&S B-2346 deck mounted workboard faucet features a forged brass body on 8" centers with 1/2" NPT threads. For superior versatility in water flow, each workboard faucet comes complete with a 10" swivel gooseneck, as well as a sidespray consisting of a 5 ft. flexible stainless steel hose and 35 degree angle spray valve.

Each 10" swivel gooseneck is designed with a convenient vacuum breaker on its nozzle with garden hose threads. This T&S B-2346 deck mounted workboard faucet features 4" wrist action handles to easy on/off capabilities.

Overall Dimensions:
Spout Length: 10"
Faucet Height: 10 3/8"
Faucet Width: 16"

Because this item is not stocked in our warehouse, processing, transit times and stock availability will vary. If you need your items by a certain date, please contact us prior to placing your order. Expedited shipping availability may vary. We cannot guarantee that this item can be cancelled off of the order or returned once it is placed.

Attention CA Residents:

Attention CA Residents

WARNING:This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.p65warnings.ca.gov.

  • CSA, Canada

    CSA, Canada

    This product has been certified by the Canadian Standards Association (CSA) to meet requirements for electrical, plumbing, and/or mechanical products in Canada.

  • Made in America

    Made in America

    This item was made in the United States of America.

  • ADA Compliant

    ADA Compliant

    This item meets criteria established by the Americans with Disabilities Act (ADA).

  • NSF/ANSI/CAN 61 (Certified by CSA)

    NSF/ANSI/CAN 61 (Certified by CSA)

    This item is certified by CSA to meet the drinking water system component standards for Canada and the United States outlined in NSF/ANSI/CAN 61.

  • NSF/ANSI/CAN 372 (Certified by CSA)

    NSF/ANSI/CAN 372 (Certified by CSA)

    This item is certified by CSA to meet the drinking water system component lead content standards for Canada and the United States outlined in NSF/ANSI/CAN 372.

  • 1/2" Water Connection

    1/2" Water Connection

    This unit comes with a 1/2" water connection for water supply.

Need Parts & Accessories?

Show replacement parts and accessories for T&S Brass and Bronze Works B-2346 today!

Resources and Downloads for
T&S Brass and Bronze Works B-2346

A PDF viewer is required to view this product's information. Download Adobe Acrobat software