Name: T&S B-2282-01-M10 7" Dipper Well Faucet and Bowl Set - 10/Case
Brand: T&S Brass and Bronze Works
SKU: 510B22821M10
Price: 1340.35 USD
Availability: LimitedAvailability

A stainless steel T&S dipper well sink with a spigot.

0:00 / 0:00

$1,340.35/Case

Ships free with Plus

Why do we do this?

Start a Live Chat with a Customer Service rep to receive the price!
Mon - Thur: 5am - 12am EST
Fri: 5am - 8pm EST
Sat & Sun: 9am - 4pm EST.

Due to a manufacturer's price increase, this price will increase by 5.00% on 01/01/25

Earn up to $40.21 back (4,021 points)with a Webstaurant Rewards Visa® Credit Card

Usually Ships in 2-3 Weeks from manufacturer

Lead times vary based on manufacturer stock

Product Overview

Bowl made from stainless steel; 1 1/2" diameter brass drain pipe
Faucet accommodates sweat fitting (5/16" ID) or 1/2" NPSM male shank (with removable coupling)
5 3/4" mounting hole for bowl

UPC Code:671262760492

View all T&S Brass and Bronze Works Dipper Wells

Quantity: 10/Case
Shipping Weight: 37.5 lb.
Height: 5 1/4 Inches
Diameter: 5 1/2 Inches
Spout Length: 2 5/16 Inches
Faucet Width: 1 1/8 Inches
Faucet Height: 2 5/8 Inches
Drain Size: 1 1/2 Inches
Finish: Chrome
Flow Rate: 0.5 GPM
Installation Type: Drop In
Material: Brass Stainless Steel
Pressure Rating: 20 - 125 PSI
Temperature Rating: 40 - 140 Degrees F
Type: Bowl and Faucet Sets
Water Inlet Size: 1/2 Inches

T&S Brass and Bronze Works B-2282-01-M10 Details

This T&S B-2282-01-M10 dipper well faucet and bowl set keeps ice cream scoops and paddles clean and sanitized with a fresh stream of water, helping to prevent potential flavor transfer and cross contamination between uses! This set features a total of 10 dipper well bowls and faucets, and each stainless steel bowl installs easily into a countertop with a 5 3/4" cutout. A 1 1/2" diameter brass drain pipe and an inner overflow cup are also included for each set.

The faucet features a solid, chrome plated brass handle that's sure to stand up to plenty of use. It can be installed using either the 5/16" ID sweat fitting, or you can remove the coupling to make it a 1/2" NPSM male shank.

Faucet Dimensions:
Spout Length: 2 5/16"
Faucet Width: 1 1/8"
Faucet Height: 2 5/8"

Well Dimensions:
Diameter: 5 1/2"
Height: 5 1/4"

Because this item is not stocked in our warehouse, processing, transit times and stock availability will vary. If you need your items by a certain date, please contact us prior to placing your order. Expedited shipping availability may vary. We cannot guarantee that this item can be cancelled off of the order or returned once it is placed.

Attention CA Residents:

Customer questions about this product

Are dipper wells vendor specific to dipping cabinets?

No, as long as a dipper well fits in the space that you have, you can use any well with any cabinet.

Does this item have any additional agency approvals and certifications?

There are a wide range of regulations that govern plumbing code! We attempt to list any current certification marks with an official logo on the product page for your convenience. However, additional approvals, codes, and standards this product adheres to may be listed on the product specsheet.

Ask your own question!

NSF/ANSI/CAN 61 (Certified by CSA)
This item is certified by CSA to meet the drinking water system component standards for Canada and the United States outlined in NSF/ANSI/CAN 61.
NSF/ANSI/CAN 372 (Certified by CSA)
This item is certified by CSA to meet the drinking water system component lead content standards for Canada and the United States outlined in NSF/ANSI/CAN 372.
1/2" Water Connection
This unit comes with a 1/2" water connection for water supply.