$178.49/Each

Ships free with Plus
Due to a manufacturer's price increase, this price will increase by 5.00% on 01/01/25

Earn up to $5.35 back (535 points)with a Webstaurant Rewards Visa® Credit Card

Usually Ships in 2-3 Weeks from manufacturer

Lead times vary based on manufacturer stock

Product Overview

  • Polished, chrome-plated brass body
  • 5 3/4" swivel gooseneck spout with 1.0 GPM aerator
  • Wrist-action handles with color-coded temperature indexes
  • Ceramic cartridges included; temperature range from 40 to 180 degrees Fahrenheit
  • Convenient wall mount configuration
UPC Code:671262913607

T&S Brass and Bronze Works B-1146-04-CR-VF10 Specs

Quantity
1/Each
Shipping Weight
4.55 lb.
Spout Length
5 3/4 Inches
Faucet Width
12 Inches
Faucet Height
10 1/2 Inches
Cartridge Type
Ceramic
Faucet Centers
4 Inches
Finish
Chrome
Flow Rate
1 GPM
Handle Type
Wrist
Material
Brass
Mounting Style
Wall Mounted
Mounting Type
Workboard
Pressure Rating
60 PSI
Rough In
4 Inches
Spout Clearance
6 1/16 Inches
Spout Type
Gooseneck
Temperature Rating
40 - 180 Degrees F
Type
Faucets
Water Inlet Size
1/2 Inches

T&S Brass and Bronze Works B-1146-04-CR-VF10 Details

Amplify the cleaning power in your establishment with this T&S wall-mounted workboard faucet. Equipped with a 5 3/4" gooseneck spout, this low-profile, chrome-plated brass faucet utilizes a 1.0 GPM aerator to deliver steady water pressure perfect for handwashing applications. The 4" wrist action handles are labeled with color-coded indexes for quick identification of water temperature.

This faucet's 4" centers make it simple to install, and the included 1/2" NPT male inlets provide the connection you need. It is engineered for maximum durability and uses ceramic cartridges to adjust the flow rate and temperature range, from 40 degrees to 180 degrees Fahrenheit. When the handles of this faucet are turned, the cartridges spin to allow water to pass through. T&S cartridges are designed with efficiency and convenience in mind, allowing you to swap out one piece in the event of a leak, instead of replacing multiple moving parts.

Overall Dimensions:
Spout Length: 5 3/4"
Faucet Width: 12"
Faucet Height: 10 1/2"

Because this item is not stocked in our warehouse, processing, transit times and stock availability will vary. If you need your items by a certain date, please contact us prior to placing your order. Expedited shipping availability may vary. We cannot guarantee that this item can be cancelled off of the order or returned once it is placed.

Attention CA Residents:

Customer questions about this product

Does this item have any additional agency approvals and certifications?

There are a wide range of regulations that govern plumbing code! We attempt to list any current certification marks with an official logo on the product page for your convenience. However, additional approvals, codes, and standards this product adheres to may be listed on the product specsheet.

What measurements do I need to install a faucet?

When installing a faucet, these are some of the most common measurements you’ll need:

Faucet Centers: If your faucet has a base with 2 inlets, measure the distance from the center of one inlet to the center of the other. This number must match the spacing of your building’s water lines (adjustable centers will help with the spacing). If mounting through the backsplash on a sink, the center measurement must also fit within the pre-drilled mounting holes.

Flex Hoses: If your faucet has flex hoses make sure that they will reach your building’s water lines.

Spout length: Make sure that the faucet spout will fit comfortably over your sink bowl and not extend too far / not far enough. If you plan to use a swing spout over a multi-bowl sink, make sure it will reach all of the bowls.
Ask your own question!
  • Made in America

    Made in America

    This item was made in the United States of America.

  • NSF/ANSI/CAN 61 (Certified by CSA)

    NSF/ANSI/CAN 61 (Certified by CSA)

    This item is certified by CSA to meet the drinking water system component standards for Canada and the United States outlined in NSF/ANSI/CAN 61.

  • 1/2" Water Connection

    1/2" Water Connection

    This unit comes with a 1/2" water connection for water supply.

Resources and Downloads for
T&S Brass and Bronze Works B-1146-04-CR-VF10

A PDF viewer is required to view this product's information. Download Adobe Acrobat software