$168.49/Each
Ships free with PlusEarn up to $5.05 back (505 points)with a Webstaurant Rewards Visa® Credit Card
Product Overview
- Polished, chrome-plated brass body
- 4 3/8" swivel gooseneck spout with 2.2 GPM aerator
- Lever handles with color-coded temperature indexes and anti-microbial coating
- Ceramic cartridges included; temperature range from 40 to 140 degrees Fahrenheit
- Convenient wall mount configuration
- Quantity
- 1/Each
- Shipping Weight
- 12.1 lb.
- Spout Length
- 4 3/8 Inches
- Faucet Width
- 8 5/8 Inches
- Faucet Height
- 9 5/8 Inches
- Cartridge Type
- Ceramic
- Faucet Centers
- 4 Inches
- Finish
- Chrome
- Flow Rate
- 2.2 GPM
- Handle Type
- Lever
- Material
- Brass
- Mounting Style
- Wall Mounted
- Mounting Type
- Workboard
- Pressure Rating
- 60 PSI
- Rough In
- 4 Inches
- Spout Clearance
- 6.025 Inches
- Spout Type
- Gooseneck
- Temperature Rating
- 40 - 180 Degrees F
- Type
- Faucets
- Water Inlet Size
- 1/2 Inches
T&S Brass and Bronze Works B-1146-02ACR-AM Details
Amplify the cleaning power in your establishment with this T&S wall-mounted workboard faucet. Equipped with a 4 3/8" gooseneck spout, this low-profile, chrome-plated brass faucet utilizes a 2.2 GPM aerator to deliver optimal water pressure perfect for handwashing applications. The lever handles are labeled with color-coded indexes for quick identification of water temperature.
This faucet's 4" centers make it simple to install, and the included 1/2" NPT male inlets provide the connection you need. It is engineered for maximum durability and uses ceramic cartridges to adjust the flow rate and temperature range, from 40 degrees to 140 degrees Fahrenheit. When the handles of this faucet are turned, the cartridges spin to allow water to pass through. T&S cartridges are designed with efficiency and convenience in mind, allowing you to swap out one piece in the event of a leak, instead of replacing multiple moving parts.
Overall Dimensions:
Spout Length: 4 3/8"
Faucet Width: 8 5/8"
Faucet Height: 9 5/8"
Because this item is not stocked in our warehouse, processing, transit times and stock availability will vary. If you need your items by a certain date, please contact us prior to placing your order. Expedited shipping availability may vary. We cannot guarantee that this item can be cancelled off of the order or returned once it is placed.
Customer questions about this product
Does this item have any additional agency approvals and certifications?
What measurements do I need to install a faucet?
Faucet Centers: If your faucet has a base with 2 inlets, measure the distance from the center of one inlet to the center of the other. This number must match the spacing of your building’s water lines (adjustable centers will help with the spacing). If mounting through the backsplash on a sink, the center measurement must also fit within the pre-drilled mounting holes.
Flex Hoses: If your faucet has flex hoses make sure that they will reach your building’s water lines.
Spout length: Make sure that the faucet spout will fit comfortably over your sink bowl and not extend too far / not far enough. If you plan to use a swing spout over a multi-bowl sink, make sure it will reach all of the bowls.
Made in America
This item was made in the United States of America.
NSF/ANSI/CAN 61 (Certified by CSA)
This item is certified by CSA to meet the drinking water system component standards for Canada and the United States outlined in NSF/ANSI/CAN 61.
1/2" Water Connection
This unit comes with a 1/2" water connection for water supply.
Resources and Downloads for
T&S Brass and Bronze Works B-1146-02ACR-AM
A PDF viewer is required to view this product's information. Download Adobe Acrobat software
Resources