$136.67/Each

Ships free with Plus

or enter your email to be instantly sent the price!

Why do we do this?

Start a Live Chat with a Customer Service rep to receive the price!
Mon - Thur: 5am - 12am EST
Fri: 5am - 8pm EST
Sat & Sun: 9am - 4pm EST.

Due to a manufacturer's price increase, this price will increase by 5.00% on 01/01/25

Usually Ships in 2-3 Weeks from manufacturer

Lead times vary based on manufacturer stock

Product Overview

  • Polished, chrome-plated brass body
  • 5 3/4" swivel gooseneck spout with 2.2 GPM aerator
  • Lever handles with color-coded temperature indexes
  • Quarter-turn Cerama ceramic cartridges with check valves
  • Flexible 24" stainless steel supply hose with swivel fitting and integral washers
UPC Code:671262912013

T&S Brass and Bronze Works B-1141-CR-KIT Specs

Quantity
1/Each
Shipping Weight
4 lb.
Hose Length
24 Inches
Spout Length
6 Inches
Faucet Width
8 5/8 Inches
Faucet Height
11 3/8 Inches
Cartridge Type
Ceramic
Faucet Centers
4 Inches
Features
ADA Compliant  Made in America
Finish
Chrome
Flow Rate
2.2 GPM
Handle Type
Lever
Installation Type
Deck Mounted
Material
Brass
Mounting Style
Deck Mounted
Mounting Type
Workboard
Rough In
4 Inches
Spout Clearance
6 15/16 Inches
Spout Type
Gooseneck
Sprayer
Without Sprayer
Temperature Rating
180 Degrees F
Type
Faucets  Installation Kits
Water Inlet Size
1/2 Inches

T&S Brass and Bronze Works B-1141-CR-KIT Details

Upgrade the efficiency of your cleaning process with this T&S B-1141-CR-KIT deck mount workboard faucet with 6" swivel gooseneck spout and 2.2 GPM aerator - Cerama cartridges. This unit utilizes 4" centers, a 24" flexible supply hose, and 1/2" NPT male inlets for easy deck mount installation. Dual lever handles are color-coded to indicate water temperature and feature quarter-turn Cerama cartridges with check valves to ensure that the faucet runs properly. The swivel gooseneck spout features a 6" length for ample clearance and a 2.2 GPM aerator that introduces air into the water stream to reduce splashing and conserve water. Additionally, a lock washer is included so that you can easily convert your unit from swivel to rigid.

Overall Dimensions:
Spout Length: 6"
Faucet Width: 8 5/8"
Faucet Height: 11 3/8"

Because this item is not stocked in our warehouse, processing, transit times and stock availability will vary. If you need your items by a certain date, please contact us prior to placing your order. Expedited shipping availability may vary. We cannot guarantee that this item can be cancelled off of the order or returned once it is placed.

Attention CA Residents:

Customer questions about this product

Does this item have any additional agency approvals and certifications?

There are a wide range of regulations that govern plumbing code! We attempt to list any current certification marks with an official logo on the product page for your convenience. However, additional approvals, codes, and standards this product adheres to may be listed on the product specsheet.

What measurements do I need to install a faucet?

When installing a faucet, these are some of the most common measurements you’ll need:

Faucet Centers: If your faucet has a base with 2 inlets, measure the distance from the center of one inlet to the center of the other. This number must match the spacing of your building’s water lines (adjustable centers will help with the spacing). If mounting through the backsplash on a sink, the center measurement must also fit within the pre-drilled mounting holes.

Flex Hoses: If your faucet has flex hoses make sure that they will reach your building’s water lines.

Spout length: Make sure that the faucet spout will fit comfortably over your sink bowl and not extend too far / not far enough. If you plan to use a swing spout over a multi-bowl sink, make sure it will reach all of the bowls.
Ask your own question!
  • Made in America

    Made in America

    This item was made in the United States of America.

  • NSF/ANSI 61 & 372

    NSF/ANSI 61 & 372

    This item meets the standards imposed by NSF International, which focuses on public safety, health, and the environment.

  • ADA Compliant

    ADA Compliant

    This item meets criteria established by the Americans with Disabilities Act (ADA).

  • NSF/ANSI/CAN 61 (Certified by CSA)

    NSF/ANSI/CAN 61 (Certified by CSA)

    This item is certified by CSA to meet the drinking water system component standards for Canada and the United States outlined in NSF/ANSI/CAN 61.

  • NSF/ANSI/CAN 372 (Certified by CSA)

    NSF/ANSI/CAN 372 (Certified by CSA)

    This item is certified by CSA to meet the drinking water system component lead content standards for Canada and the United States outlined in NSF/ANSI/CAN 372.

  • 1/2" Water Connection

    1/2" Water Connection

    This unit comes with a 1/2" water connection for water supply.

Resources and Downloads for
T&S Brass and Bronze Works B-1141-CR-KIT

A PDF viewer is required to view this product's information. Download Adobe Acrobat software