$156.75/Each
Ships free with PlusLogin or enter your email to be instantly sent the price!
Start a Live Chat with a Customer Service rep to receive the price!
Mon - Thur: 5am - 12am EST
Fri: 5am - 8pm EST
Sat & Sun: 9am - 4pm EST.
Usually Ships in 2-3 Weeks from manufacturer
Lead times vary based on manufacturer stock
Product Overview
- 4" centers
- 11 3/8" high gooseneck spout
- 2.2 GPM aerator
- Cerama cartridges
- 1/2" NPT male inlets with tailpieces and nuts
- Wrist handles
- Chrome plated brass body
Works With"Works With" items are guaranteed to work with the item you are viewing, such as lids that will fit a cup or casters that will fit a piece of equipment. If an item is not listed in this section, we do not guarantee that it will work with the product you are viewing and do not recommend that you purchase them for use together.
- Quantity
- 1/Each
- Shipping Weight
- 4.45 lb.
- Spout Length
- 5 3/4 Inches
- Faucet Width
- 12 Inches
- Faucet Height
- 11 3/8 Inches
- Cartridge Type
- Ceramic
- Faucet Centers
- 4 Inches
- Finish
- Chrome
- Flow Rate
- 2.2 GPM
- Handle Type
- Wrist
- Material
- Brass
- Mounting Style
- Deck Mounted
- Mounting Type
- Workboard
- Pressure Rating
- 20 - 125 PSI
- Rough In
- 4 Inches
- Spout Clearance
- 6 15/16 Inches
- Spout Type
- Gooseneck
- Sprayer
- Without Sprayer
- Temperature Rating
- 40 - 140 Degrees F
- Type
- Faucets
- Water Inlet Size
- 1/2 Inches
T&S Brass and Bronze Works B-1141-04-CR Details
This T&S B-1141-04-CR deck mounted workboard faucet is the perfect solution when you need a reliable water fixture for your facility. It boasts a set of 4" centers for easy installation while its 11 3/8" gooseneck spout and 2.2 GPM aerator deliver gentle water flow that's perfect for multiple applications.
Additionally, this faucet is engineered for maximum durability and uses Cerama cartridges to adjust the temperature and flow rate. These cartridges contain ceramic discs that form a long-lasting water tight seal. When the wrist handles of this faucet are turned, the discs spin to allow water to pass through. T&S cartridges are designed with efficiency and convenience in mind, allowing you to swap out one piece in the event of a leak, instead of replacing multiple moving parts.
Overall Dimensions:
Spout Length: 5 3/4"
Faucet Height: 11 3/8"
Faucet Width: 12"
Because this item is not stocked in our warehouse, processing, transit times and stock availability will vary. If you need your items by a certain date, please contact us prior to placing your order. Expedited shipping availability may vary. We cannot guarantee that this item can be cancelled off of the order or returned once it is placed.
Attention CA Residents:Customer questions about this product
Does this item have any additional agency approvals and certifications?
What measurements do I need to install a faucet?
Faucet Centers: If your faucet has a base with 2 inlets, measure the distance from the center of one inlet to the center of the other. This number must match the spacing of your building’s water lines (adjustable centers will help with the spacing). If mounting through the backsplash on a sink, the center measurement must also fit within the pre-drilled mounting holes.
Flex Hoses: If your faucet has flex hoses make sure that they will reach your building’s water lines.
Spout length: Make sure that the faucet spout will fit comfortably over your sink bowl and not extend too far / not far enough. If you plan to use a swing spout over a multi-bowl sink, make sure it will reach all of the bowls.
Made in America
This item was made in the United States of America.
ADA Compliant
This item meets criteria established by the Americans with Disabilities Act (ADA).
NSF Listed
This item has been certified by NSF International to meet applicable product standards on public safety, health, and / or the environment.
NSF/ANSI/CAN 61 (Certified by CSA)
This item is certified by CSA to meet the drinking water system component standards for Canada and the United States outlined in NSF/ANSI/CAN 61.
NSF/ANSI/CAN 372 (Certified by CSA)
This item is certified by CSA to meet the drinking water system component lead content standards for Canada and the United States outlined in NSF/ANSI/CAN 372.
1/2" Water Connection
This unit comes with a 1/2" water connection for water supply.
Need Parts & Accessories?
Show replacement parts and accessories for T&S Brass and Bronze Works B-1141-04-CR today!
Resources and Downloads for
T&S Brass and Bronze Works B-1141-04-CR
A PDF viewer is required to view this product's information. Download Adobe Acrobat software
Related Items
Faucet Nozzles
274 Products
Faucet Parts and Accessories
25 Categories
Drain Accessories
315 Products
Deck-Mount Faucets
741 Products