- 4" centers
- 6" swing spout
- 1.2 GPM aerator
- Eterna cartridges
- 1/2" NPSM extended male inlets
- Lever handles
- Chrome plated brass body
- Shipping Weight
- 2.7 lb.
- Spout Length
- 6 Inches
- Faucet Width
- 8 5/8 Inches
- Faucet Height
- 6 3/16 Inches
- Cartridge Type
- California AB100 Compliant
- Faucet Centers
- 4 Inches
- ADA Compliant
Made in America
- Polished Chrome
- Flow Rate
- 1.2 GPM
- Handle Type
- Mounting Style
- Deck Mounted
- Mounting Type
- Pressure Rating
- 20 - 125 PSI
- Spout Clearance
- 3 1/16 Inches
- Spout Type
- Temperature Rating
- 40 - 140 Degrees Fahrenheit
- Water Inlet Size
- 1/2 Inches
Customer questions about this product
Does this item have any additional agency approvals and certifications?
There are a wide range of regulations that govern plumbing code! We attempt to list any current certification marks with an official logo on the product page for your convenience. However, additional approvals, codes, and standards this product adheres to may be listed on the product specsheet.
What measurements do I need to install a faucet?
When installing a faucet, these are some of the most common measurements you’ll need:
Faucet Centers: If your faucet has a base with 2 inlets, measure the distance from the center of one inlet to the center of the other. This number must match the spacing of your building’s water lines (adjustable centers will help with the spacing). If mounting through the backsplash on a sink, the center measurement must also fit within the pre-drilled mounting holes.
Flex Hoses: If your faucet has flex hoses make sure that they will reach your building’s water lines.
Spout length: Make sure that the faucet spout will fit comfortably over your sink bowl and not extend too far / not far enough. If you plan to use a swing spout over a multi-bowl sink, make sure it will reach all of the bowls.
T&S Brass and Bronze Works B-1110-XS-F12 Details
This T&S B-1110-XS-F12 deck mounted workboard faucet is the perfect solution when you need a reliable water fixture in your facility. It boasts 4" centers while its 6" swing spout and 1.2 GPM aerator deliver extra-fast water flow in any application. Additionally, this faucet is engineered for maximum durability and uses Eterna compression cartridges to control the water flow. These cartridges provide excellent durability thanks to a solid brass spindle and body. When the lever handles of this faucet are turned, the cartridge lifts to allow water to pass through. T&S cartridges are designed with efficiency and convenience in mind, allowing you to swap out one piece in the event of a leak, instead of replacing multiple moving parts.
Spout Length: 6"
Faucet Height: 6 3/16"
Faucet Width: 8 5/8"
Because this item is not stocked in our warehouse, processing, transit times and stock availability will vary. If you need your items by a certain date, please contact us prior to placing your order. Expedited shipping availability may vary. We cannot guarantee that this item can be cancelled off of the order or returned once it is placed.
This item meets the criteria established by the Americans with Disabilities Act (ADA), helping make your restaurant more accessible to people with disabilities.
NSF/ANSI/CAN 61 (Certified by CSA)
This item is certified by CSA to meet the drinking water system component standards for Canada and the United States outlined in NSF/ANSI/CAN 61.
NSF/ANSI/CAN 372 (Certified by CSA)
This item is certified by CSA to meet the drinking water system component lead content standards for Canada and the United States outlined in NSF/ANSI/CAN 372.
This item meets the standards imposed by NSF International, which focuses on public safety, health, and the environment.
This item is certified by the EPA's WaterSense program to meet its standards for water use. WaterSense-labeled products are certified to use at least 20 percent less water, save energy, and perform as well as or better than regular models.
Made in America
This item was made in the United States of America.
1/2" Water Connection
This unit comes with a 1/2" water connection for water supply.
Need Parts & Accessories?
View replacements or accessories for T&S Brass and Bronze Works B-1110-XS-F12
Leave a review of this product!
If you've used this product, log in and leave a review to tell us and other customers what you thought about it. Get paid up to $16 for submitting one of the first text, photo, or video reviews for this item. View your account for details.Login or Register