$141.35/Each
Ships free with PlusLogin or enter your email to be instantly sent the price!
Start a Live Chat with a Customer Service rep to receive the price!
Mon - Thur: 5am - 12am EST
Fri: 5am - 8pm EST
Sat & Sun: 9am - 4pm EST.
Usually Ships in 2-3 Weeks from manufacturer
Lead times vary based on manufacturer stock
Product Overview
- 4" centers
- 1.2 GPM aerator
- Eterna cartridges
- 1/2" NPSM male inlets
- Lever handles
- Quantity
- 1/Each
- Shipping Weight
- 5 lb.
- Spout Length
- 3 3/4 Inches
- Faucet Width
- 8 5/8 Inches
- Faucet Height
- 3 5/16 Inches
- Cartridge Type
- Compression
- Faucet Centers
- 4 Inches
- Finish
- Chrome
- Flow Rate
- 1.2 GPM
- Handle Type
- Lever
- Material
- Brass
- Mounting Style
- Deck Mounted
- Pressure Rating
- 20 - 125 PSI
- Spout Clearance
- 1 7/16 Inches
- Spout Type
- Cast
- Temperature Rating
- 40 - 140 Degrees Fahrenheit
- Type
- Faucets
- Water Inlet Size
- 1/2 Inches
Customer questions about this product
Can I use this product to serve drinking water?
This product is not intended for use in applications where potable (drinking) water is dispensed for human consumption.
Does this item have any additional agency approvals and certifications?
There are a wide range of regulations that govern plumbing code! We attempt to list any current certification marks with an official logo on the product page for your convenience. However, additional approvals, codes, and standards this product adheres to may be listed on the product specsheet.
What measurements do I need to install a faucet?
When installing a faucet, these are some of the most common measurements you’ll need:
Faucet Centers: If your faucet has a base with 2 inlets, measure the distance from the center of one inlet to the center of the other. This number must match the spacing of your building’s water lines (adjustable centers will help with the spacing). If mounting through the backsplash on a sink, the center measurement must also fit within the pre-drilled mounting holes.
Flex Hoses: If your faucet has flex hoses make sure that they will reach your building’s water lines.
Spout length: Make sure that the faucet spout will fit comfortably over your sink bowl and not extend too far / not far enough. If you plan to use a swing spout over a multi-bowl sink, make sure it will reach all of the bowls.
T&S Brass and Bronze Works B-0871-F12 Details
This T&S B-0871-F12 deck mounted faucet is the perfect solution when you need a reliable water fixture for hand-washing in your facility. It boasts a set of 4" centers for easy installation while its lavatory spout and 1.2 GPM aerator deliver gentle water flow that's perfect for hand-washing applications.
Additionally, this faucet is engineered for maximum durability and uses Eterna compression cartridges to control the water flow. These cartridges provide excellent durability thanks to a solid brass spindle and body. When the lever handles of this faucet are turned, the cartridge lifts to allow water to pass through. T&S cartridges are designed with efficiency and convenience in mind, allowing you to swap out one piece in the event of a leak, instead of replacing multiple moving parts.
Overall Dimensions:
Spout Length: 3 3/4"
Faucet Height: 3 5/16"
Faucet Width: 8 5/8"
Because this item is not stocked in our warehouse, processing, transit times and stock availability will vary. If you need your items by a certain date, please contact us prior to placing your order. Expedited shipping availability may vary. We cannot guarantee that this item can be cancelled off of the order or returned once it is placed.
Attention CA Residents:
ADA Compliant
This item meets criteria established by the Americans with Disabilities Act (ADA).
NSF/ANSI/CAN 61 (Certified by CSA)
This item is certified by CSA to meet the drinking water system component standards for Canada and the United States outlined in NSF/ANSI/CAN 61.
NSF/ANSI/CAN 372 (Certified by CSA)
This item is certified by CSA to meet the drinking water system component lead content standards for Canada and the United States outlined in NSF/ANSI/CAN 372.
EPA WaterSense
This item is certified by the EPA's WaterSense program to meet its standards for water use. WaterSense-labeled products are certified to use at least 20 percent less water, save energy, and perform as well as or better than regular models.
ICC-ES ASME A112.18.1/CSA B125.1
This item has been tested by the ICC-ES to meet ASME A112.18.1/CSA B125.1 standards for plumbing fittings and fixtures.
1/2" Water Connection
This unit comes with a 1/2" water connection for water supply.
Resources and Downloads for
T&S Brass and Bronze Works B-0871-F12
A PDF viewer is required to view this product's information. Download Adobe Acrobat software
Resources
Related Items
Medical Faucets
347 Products
Bath and Shower Fixtures
179 Products
