$191.40/Each

Ships free with Plus

or enter your email to be instantly sent the price!

Why do we do this?

Start a Live Chat with a Customer Service rep to receive the price!
Mon - Thur: 5am - 12am EST
Fri: 5am - 8pm EST
Sat & Sun: 9am - 4pm EST.

Due to a manufacturer's price increase, this price will increase by 5.00% on 01/01/25

Earn up to $5.74 back (574 points)with a Webstaurant Rewards Visa® Credit Card

Usually Ships in 2-3 Weeks from manufacturer

Lead times vary based on manufacturer stock

Product Overview

  • 2 3/8" length, 1 1/2" clearance
  • Garden hose male outlet; 4.79 GPM at 60 psi
  • 3/4" NPT female inlet size
  • Single base
  • Includes loose key stop, vacuum breaker, and polished chrome finish
UPC Code:671262591768

T&S Brass and Bronze Works B-0722 Specs

Quantity
1/Each
Shipping Weight
4 lb.
Spout Length
2 3/8 Inches
Faucet Width
2 7/8 Inches
Faucet Height
4 5/16 Inches
Cartridge Type
Compression
Faucet Centers
Single
Features
Vacuum Breaker
Finish
Chrome
Handle Type
Tee
Mounting Style
Wall Mounted
Spout Clearance
1 1/2 Inches
Temperature Rating
180 Degrees F
Type
Faucets
Water Inlet Size
1/2 Inches

T&S Brass and Bronze Works B-0722 Details

This T&S B-0722 wall mounted sill faucet delivers quality and craftsmanship that you can depend on, whether you're installing this product as a brand new water fixture or replacing an old one. The faucet spout measures 2 3/8" long, while the garden hose male outlet lets you attach a hose to the end of the spout for added reach. It maintains a flow rate of approximately 4.79 GPM at 60 psi.

The faucet can operate at pressures between 20 - 125 psi and temperatures ranging from 40 - 140 degrees Fahrenheit. And since it is made from polished chrome-plated brass you can be sure that this faucet will stand up to even the most demanding environments for years to come. It features a loose key stop and tee handle design with an Eterna compression cartridge to turn the water flow on and off. This design reduces the risk of tampering because the user must have the tee handle to control the water flow, so it's a great option in locations where unwanted faucet use is a concern. The inlet size is 3/4" NPT female. A vacuum breaker is included to prevent harmful backflow from entering your potable water supply, and may be required by some codes.

T&S has been providing commercial applications with innovative plumbing solutions for all of their most pressing needs for more than 70 years! Whether a fixture is needed for handwashing stations, potwashing stations, laboratories, glass fillers, or grooming operations, T&S has the reliable products you need for consistent performance that will withstand the rigors of everyday commercial use. Their catalog features everything from faucets to sinks, dipper wells, and virtually any gas or water connection you might need. For unrivaled selection and quality, check out T&S for all of your plumbing needs!

Overall Dimensions:
Spout Length: 2 3/8"
Faucet Height: 4 5/16"
Faucet Width: 2 7/8"

Because this item is not stocked in our warehouse, processing, transit times and stock availability will vary. If you need your items by a certain date, please contact us prior to placing your order. Expedited shipping availability may vary. We cannot guarantee that this item can be cancelled off of the order or returned once it is placed.

Attention CA Residents:

Customer questions about this product

Can I use this product to serve drinking water?

This product is not intended for use in applications where potable (drinking) water is dispensed for human consumption.

Does this item have any additional agency approvals and certifications?

There are a wide range of regulations that govern plumbing code! We attempt to list any current certification marks with an official logo on the product page for your convenience. However, additional approvals, codes, and standards this product adheres to may be listed on the product specsheet.

What measurements do I need to install a faucet?

When installing a faucet, these are some of the most common measurements you’ll need:

Faucet Centers: If your faucet has a base with 2 inlets, measure the distance from the center of one inlet to the center of the other. This number must match the spacing of your building’s water lines (adjustable centers will help with the spacing). If mounting through the backsplash on a sink, the center measurement must also fit within the pre-drilled mounting holes.

Flex Hoses: If your faucet has flex hoses make sure that they will reach your building’s water lines.

Spout length: Make sure that the faucet spout will fit comfortably over your sink bowl and not extend too far / not far enough. If you plan to use a swing spout over a multi-bowl sink, make sure it will reach all of the bowls.
Ask your own question!
  • Made in America

    Made in America

    This item was made in the United States of America.

  • NSF/ANSI/CAN 61 (Certified by CSA)

    NSF/ANSI/CAN 61 (Certified by CSA)

    This item is certified by CSA to meet the drinking water system component standards for Canada and the United States outlined in NSF/ANSI/CAN 61.

  • NSF/ANSI/CAN 372 (Certified by CSA)

    NSF/ANSI/CAN 372 (Certified by CSA)

    This item is certified by CSA to meet the drinking water system component lead content standards for Canada and the United States outlined in NSF/ANSI/CAN 372.

  • 1/2" Water Connection

    1/2" Water Connection

    This unit comes with a 1/2" water connection for water supply.

Resources and Downloads for
T&S Brass and Bronze Works B-0722

A PDF viewer is required to view this product's information. Download Adobe Acrobat software