Name: T&S B-0300-WD Deck Mounted Pre-Rinse Faucet with Flex Inlets, Angled Low Flow Spray Valve, 60" Hose, Vacuum Breaker, and Wall Hook
Brand: T&S Brass and Bronze Works
SKU: 510B0300WD
Price: 460.07 USD
Availability: LimitedAvailability

A chrome T&S deck mounted pre-rinse faucet with flex inlets and a hose.

0:00 / 0:00

$460.07/Each

Ships free with Plus

Why do we do this?

Start a Live Chat with a Customer Service rep to receive the price!
Mon - Thur: 5am - 12am EST
Fri: 5am - 8pm EST
Sat & Sun: 9am - 4pm EST.

Due to a manufacturer's price increase, this price will increase by 5.00% on 01/01/25

Earn up to $13.80 back (1,380 points)with a Webstaurant Rewards Visa® Credit Card

Usually Ships in 2-3 Weeks from manufacturer

Lead times vary based on manufacturer stock

Product Overview

Single hole base; 1/2" NPSM male inlet flex hoses (5/8" compression fittings)
60" flex hose; 0.65 GPM B-0107-C35 spray valve
Lever handles with color coded indexes
Eterna compression cartridges with spring checks; can withstand water temperatures up to 140 degrees
Includes wall hook and vacuum breaker

UPC Code:671262747547

View all T&S Brass and Bronze Works Pre-Rinse Faucets

plus
T&S B-TEE-RGD 3/8" NPT Rigid Tee Assembly for Pre-Rinse Faucets
$66.22/Each
plus
Easyflex White PTFE Thread Seal Tape 1/2" x 520"
$0.79/Each

Quantity: 1/Each
Shipping Weight: 12 lb.
Hose Length: 60 Inches
Faucet Width: 7 7/16 Inches
Faucet Height: 6 3/16 Inches
Add-On Faucet: None
Cartridge Type: Compression
Faucet Centers: Single
Features: Angled Spray Valve Flex Inlets Included Vacuum Breaker
Finish: Chrome
Handle Type: Lever
Material: Brass
Mounting Style: Deck Mounted
Pre Rinse Unit Type: No Riser
Pressure Rating: 125 PSI
Spray Valve Flow Rate: 0.65 GPM
Temperature Rating: 40 - 140 Degrees F
Type: Pre-Rinse Units
Water Inlet Size: 1/2 Inches

T&S Brass and Bronze Works B-0300-WD Details

This T&S B-0300-WD deck mounted pre-rinse faucet features a 60" flex hose that gives you maximum flexibility and reach for a variety of tasks! A 0.65 GPM low flow spray valve delivers water right where you need it, while conserving water and saving you money on your utility bill. It also features an angled design for ergonomic use and less fatigue on the hands. To make installation easy, it also boasts 1/2" NPSM male inlets on 18" flexible connector hoses. Removable compression fittings for 5/8" copper tubing are provided.

- 60" flex hose is great for many pre-rinse applications

- 0.65 GPM spray valve (B-0107-C35) with ergonomic squeeze handle and angled design

- Lever handles with color coded indexes for durability and easy operation

- Eterna compression cartridges provide excellent durability; solid brass spindle and body; spring checks are included

- Includes vacuum breaker to prevent backflow; wall hook lets you hang up spray valve when not in use

- Durable chrome plated brass construction

Overall Dimensions:
Faucet Height: 6 3/16"
Faucet Width: 7 7/16"

Because this item is not stocked in our warehouse, processing, transit times and stock availability will vary. If you need your items by a certain date, please contact us prior to placing your order. Expedited shipping availability may vary. We cannot guarantee that this item can be cancelled off of the order or returned once it is placed.

Attention CA Residents:

Customer questions about this product

Can I get a spray valve with a higher flow rate (GPM)?

A: The maximum flow rate for all commercial pre-rinse spray valves produced after January 28, 2019 is 1.28 GPM – more specific regulations may apply based on the valve’s spray force in ounce-force (ozf).

Product Class 1 (5 ozf or less) – Max Flow Rate: 1 GPM
Product Class 2 (5.01 - 8 ozf) – Max Flow Rate: 1.2 GPM
Product Class 3 (over 8 ozf) – Max Flow Rate: 1.28 GPM

These regulations do not impact spray valves made before January 28, 2019, and are implemented by the US Department of Energy in an effort to improve energy conservation.

Can I use this product to serve drinking water?

This product is not intended for use in applications where potable (drinking) water is dispensed for human consumption.

Does this item have any additional agency approvals and certifications?

There are a wide range of regulations that govern plumbing code! We attempt to list any current certification marks with an official logo on the product page for your convenience. However, additional approvals, codes, and standards this product adheres to may be listed on the product specsheet.

How do I use a wall bracket to stabilize a pre-rinse faucet?

Pre-rinse faucets with a riser may include a wall bracket to help use the wall for added stability. Pre-rinse faucets without a riser will generally not include or need a wall bracket.

If your unit comes with a bracket, or you plan on adding one, the bracket can be installed at whatever height you prefer, but to be effective it should be placed far enough above the base so as to inhibit movement to the riser – placing too close to the base may make it ineffective.

If you intend to use a wall bracket, consider potential concerns with the installation location, such as shelving or windows behind the faucet, that might limit where you can place the bracket.

How is the pre-rinse hose length measured?

Unless otherwise specified, the quoted hose length includes any grips or connectors at the end of the hose, so the actual working length of the hose may be slightly less than described. Please refer to the product's specsheet for more detailed dimensions.

I have a chemical injection system on my compartment sink. Can I use my pre-rinse faucet to supply water to it?

Yes! Item B-TEE-RGD is a rigid tee assembly that installs easily into an existing T&S pre-rinse faucet (or you can use it on a brand new faucet) and provides you with a means to deliver water to a chemical injection system, or other, similar sink accessories that may require a water supply.

Ask your own question!

Made in America
This item was made in the United States of America.
NSF/ANSI/CAN 61 (Certified by CSA)
This item is certified by CSA to meet the drinking water system component standards for Canada and the United States outlined in NSF/ANSI/CAN 61.
NSF/ANSI/CAN 372 (Certified by CSA)
This item is certified by CSA to meet the drinking water system component lead content standards for Canada and the United States outlined in NSF/ANSI/CAN 372.
1/2" Water Connection
This unit comes with a 1/2" water connection for water supply.