$256.85/Each
Ships free with PlusLogin or enter your email to be instantly sent the price!
Start a Live Chat with a Customer Service rep to receive the price!
Mon - Thur: 5am - 12am EST
Fri: 5am - 8pm EST
Sat & Sun: 9am - 4pm EST.
Earn up to $7.71 back (771 points)with a Webstaurant Rewards Visa® Credit Card
Usually Ships in 2-3 Weeks from manufacturer
Lead times vary based on manufacturer stock
Product Overview
- Single hole base; 1/2" NPSM male inlet flex hoses (5/8" compression fittings)
- 68" flex hose; 002851-40 hook nozzle spray valve
- Lever handles with color coded indexes
- Eterna compression cartridges with spring checks; can withstand water temperatures up to 140 degrees
- Includes wall hook
- Chrome plated brass construction
Works With"Works With" items are guaranteed to work with the item you are viewing, such as lids that will fit a cup or casters that will fit a piece of equipment. If an item is not listed in this section, we do not guarantee that it will work with the product you are viewing and do not recommend that you purchase them for use together.
- Quantity
- 1/Each
- Shipping Weight
- 12 lb.
- Hose Length
- 68 Inches
- Faucet Width
- 7 1/2 Inches
- Cartridge Type
- Compression
- Faucet Centers
- Single
- Features
- Flex Inlets Included Hook Nozzle Made in America
- Finish
- Chrome
- Flow Rate
- 3.74 GPM
- Handle Type
- Lever
- Material
- Brass
- Mounting Style
- Deck Mounted
- Pressure Rating
- 125 PSI
- Spout Type
- Hose and Fill Valve
- Temperature Rating
- 140 Degrees Fahrenheit
- Type
- Pot / Kettle Fillers
- Water Inlet Size
- 5/8 Inches
Customer questions about this product
Does this item have any additional agency approvals and certifications?
There are a wide range of regulations that govern plumbing code! We attempt to list any current certification marks with an official logo on the product page for your convenience. However, additional approvals, codes, and standards this product adheres to may be listed on the product specsheet.
How is the pre-rinse hose length measured?
Unless otherwise specified, the quoted hose length includes any grips or connectors at the end of the hose, so the actual working length of the hose may be slightly less than described. Please refer to the product's specsheet for more detailed dimensions.
I have a chemical injection system on my compartment sink. Can I use my pre-rinse faucet to supply water to it?
Yes! Item B-TEE-RGD is a rigid tee assembly that installs easily into an existing T&S pre-rinse faucet (or you can use it on a brand new faucet) and provides you with a means to deliver water to a chemical injection system, or other, similar sink accessories that may require a water supply.
What measurements do I need to install a faucet?
When installing a faucet, these are some of the most common measurements you’ll need:
Faucet Centers: If your faucet has a base with 2 inlets, measure the distance from the center of one inlet to the center of the other. This number must match the spacing of your building’s water lines (adjustable centers will help with the spacing). If mounting through the backsplash on a sink, the center measurement must also fit within the pre-drilled mounting holes.
Flex Hoses: If your faucet has flex hoses make sure that they will reach your building’s water lines.
Spout length: Make sure that the faucet spout will fit comfortably over your sink bowl and not extend too far / not far enough. If you plan to use a swing spout over a multi-bowl sink, make sure it will reach all of the bowls.
T&S Brass and Bronze Works B-0300-102A Details
This T&S B-0300-102A deck mounted pot / kettle filler faucet features a 68" flex hose that gives you maximum flexibility and reach for a variety of tasks! A special hook nozzle spray valve allows you to deliver water right where you need it, and to simply hang it up on a hook when you're done! To make installation easy, it also boasts 1/2" NPSM male inlets on 18" flexible connector hoses. Removable compression fittings for 5/8" copper tubing are provided.
- 68" flex hose is great for many pot / kettle filler applications
- Hook nozzle spray valve (002851-40) is easy to hang out of the way when not in use
- Lever handles with color coded indexes for durability and easy operation
- Eterna compression cartridges provide excellent durability; solid brass spindle and body; spring checks are included
- Wall hook lets you hang up spray valve when not in use
- Durable chrome plated brass construction
Overall Dimensions:
Faucet Width: 7 1/2"
Because this item is not stocked in our warehouse, processing, transit times and stock availability will vary. If you need your items by a certain date, please contact us prior to placing your order. Expedited shipping availability may vary. We cannot guarantee that this item can be cancelled off of the order or returned once it is placed.
Attention CA Residents:
Made in America
This item was made in the United States of America.
NSF/ANSI/CAN 61 (Certified by CSA)
This item is certified by CSA to meet the drinking water system component standards for Canada and the United States outlined in NSF/ANSI/CAN 61.
NSF/ANSI/CAN 372 (Certified by CSA)
This item is certified by CSA to meet the drinking water system component lead content standards for Canada and the United States outlined in NSF/ANSI/CAN 372.
1/2" Water Connection
This unit comes with a 1/2" water connection for water supply.
Resources and Downloads for
T&S Brass and Bronze Works B-0300-102A
A PDF viewer is required to view this product's information. Download Adobe Acrobat software
Resources
Related Items
Deck-Mount Faucets
760 Products
Wall Mount Faucets
417 Products
Faucet Parts and Accessories
25 Categories
Pre-Rinse Faucets
735 Products