$166.49/Each

Ships free with Plus
Due to a manufacturer's price increase, this price will increase by 5.00% on 01/01/25

Earn up to $4.99 back (499 points)with a Webstaurant Rewards Visa® Credit Card

Usually Ships in 2-3 Weeks from manufacturer

Lead times vary based on manufacturer stock

Product Overview

  • 8" centers; 1/2" NPT female inlets
  • 12" swing nozzle with 1.5 GPM aerator
  • Features checks and lever handles
  • Compression cartridges included; temperature range from 40 to 140 degrees Fahrenheit
  • Convenient wall mount configuration; Install kit sold separately
UPC Code:671262910446

T&S Brass and Bronze Works B-0231-V15 Specs

Quantity
1/Each
Shipping Weight
4.9 lb.
Spout Length
12 Inches
Faucet Width
12 5/8 Inches
Faucet Height
7 1/2 Inches
Cartridge Type
Compression
Faucet Centers
8 Inches
Finish
Chrome
Flow Rate
1.5 GPM
Handle Type
Lever
Material
Brass
Mounting Style
Wall Mounted
Mounting Type
Workboard
Pressure Rating
60 PSI
Rough In
8 Inches
Spout Clearance
4 3/8 Inches
Spout Type
Swing
Temperature Rating
40 - 140 Degrees F
Type
Faucets

T&S Brass and Bronze Works B-0231-V15 Details

This T&S wall-mounted double pantry faucet is the perfect solution when you need a reliable water fixture in your facility. Its 12" swing nozzle with a 1.5 GPM aerator delivers optimal water flow with a flexible range that's ideal for multiple applications. The lever handles are labeled with color-coded indexes for quick identification of water temperature.

This faucet's 8" centers make it simple to install; the 1/2" NPT female inlet install kit (sold separately) provides all of the setup components you need. It is engineered for maximum durability and uses compression cartridges to adjust the flow rate and temperature range, from 40 degrees to 140 degrees Fahrenheit. When the handles of this faucet are turned, the cartridges spin to allow water to pass through. T&S cartridges are designed with efficiency and convenience in mind, allowing you to swap out one piece in the event of a leak, instead of replacing multiple moving parts.

Overall Dimensions:
Spout Length: 12"
Faucet Width: 8"
Faucet Height: 7 1/2"

Because this item is not stocked in our warehouse, processing, transit times and stock availability will vary. If you need your items by a certain date, please contact us prior to placing your order. Expedited shipping availability may vary. We cannot guarantee that this item can be cancelled off of the order or returned once it is placed.

Attention CA Residents:

Customer questions about this product

Does this item have any additional agency approvals and certifications?

There are a wide range of regulations that govern plumbing code! We attempt to list any current certification marks with an official logo on the product page for your convenience. However, additional approvals, codes, and standards this product adheres to may be listed on the product specsheet.

What measurements do I need to install a faucet?

When installing a faucet, these are some of the most common measurements you’ll need:

Faucet Centers: If your faucet has a base with 2 inlets, measure the distance from the center of one inlet to the center of the other. This number must match the spacing of your building’s water lines (adjustable centers will help with the spacing). If mounting through the backsplash on a sink, the center measurement must also fit within the pre-drilled mounting holes.

Flex Hoses: If your faucet has flex hoses make sure that they will reach your building’s water lines.

Spout length: Make sure that the faucet spout will fit comfortably over your sink bowl and not extend too far / not far enough. If you plan to use a swing spout over a multi-bowl sink, make sure it will reach all of the bowls.
Ask your own question!
  • Made in America

    Made in America

    This item was made in the United States of America.

  • NSF/ANSI/CAN 61 (Certified by CSA)

    NSF/ANSI/CAN 61 (Certified by CSA)

    This item is certified by CSA to meet the drinking water system component standards for Canada and the United States outlined in NSF/ANSI/CAN 61.

Need Parts & Accessories?

Show replacement parts and accessories for T&S Brass and Bronze Works B-0231-V15 today!

Resources and Downloads for
T&S Brass and Bronze Works B-0231-V15

A PDF viewer is required to view this product's information. Download Adobe Acrobat software