$268.67/Each
Ships free with PlusLogin or enter your email to be instantly sent the price!
Start a Live Chat with a Customer Service rep to receive the price!
Mon - Thur: 5am - 12am EST
Fri: 5am - 8pm EST
Sat & Sun: 9am - 4pm EST.
Earn up to $8.06 back (806 points)with a Webstaurant Rewards Visa® Credit Card
Usually Ships in 2-3 Weeks from manufacturer
Lead times vary based on manufacturer stock
Product Overview
- 1.15 GPM angled spray head with handle
- 68" stainless steel flex hose
- 4-arm handle
- 1/2" NPT female inlet
- 5 3/16" overall height
Works With"Works With" items are guaranteed to work with the item you are viewing, such as lids that will fit a cup or casters that will fit a piece of equipment. If an item is not listed in this section, we do not guarantee that it will work with the product you are viewing and do not recommend that you purchase them for use together.
- Quantity
- 1/Each
- Shipping Weight
- 6.82 lb.
- Hose Length
- 68 Inches
- Faucet Height
- 5 3/16 Inches
- Add-On Faucet
- None
- Cartridge Type
- Compression
- Faucet Centers
- Single
- Features
- Angled Spray Valve Vacuum Breaker
- Finish
- Chrome
- Handle Type
- 4 Arm
- Material
- Brass
- Mounting Style
- Wall Mounted
- Pre Rinse Unit Type
- No Riser
- Pressure Rating
- 125 PSI
- Spray Valve Flow Rate
- 1.15 GPM
- Temperature Rating
- 40 - 140 Degrees Fahrenheit
- Type
- Pre-Rinse Units
- Water Inlet Size
- 1/2 Inches
Customer questions about this product
Can I use this product to serve drinking water?
This product is not intended for use in applications where potable (drinking) water is dispensed for human consumption.
Does this item have any additional agency approvals and certifications?
There are a wide range of regulations that govern plumbing code! We attempt to list any current certification marks with an official logo on the product page for your convenience. However, additional approvals, codes, and standards this product adheres to may be listed on the product specsheet.
How is the pre-rinse hose length measured?
Unless otherwise specified, the quoted hose length includes any grips or connectors at the end of the hose, so the actual working length of the hose may be slightly less than described. Please refer to the product's specsheet for more detailed dimensions.
What measurements do I need to install a faucet?
When installing a faucet, these are some of the most common measurements you’ll need:
Faucet Centers: If your faucet has a base with 2 inlets, measure the distance from the center of one inlet to the center of the other. This number must match the spacing of your building’s water lines (adjustable centers will help with the spacing). If mounting through the backsplash on a sink, the center measurement must also fit within the pre-drilled mounting holes.
Flex Hoses: If your faucet has flex hoses make sure that they will reach your building’s water lines.
Spout length: Make sure that the faucet spout will fit comfortably over your sink bowl and not extend too far / not far enough. If you plan to use a swing spout over a multi-bowl sink, make sure it will reach all of the bowls.
T&S Brass and Bronze Works B-0170 Details
The T&S B-0170 wall mounted spray faucet delivers quality and craftsmanship that you can depend on, whether you're installing this product as a brand new water fixture or replacing an old one. It boasts a flow rate of 1.15 GPM and comes with an angled head and handle for increased comfort during use. The 68" stainless steel hose gives you plenty of mobility and lets you deliver water exactly where you need it. This faucet also features a vacuum breaker to prevent harmful backlow from contaminating your water supply.
The faucet can operate at pressures between 20 - 125 psi and temperatures ranging from 40 - 140 degrees Fahrenheit. And since it is made from polished chrome-plated brass you can be sure that this faucet will stand up to even the most demanding environments for years to come. It features a 4-arm handle design and an Eterna compression cartridge to turn the water flow on and off. The inlet size is 1/2" NPT female.
T&S has been providing commercial applications with innovative plumbing solutions for all of their most pressing needs for more than 70 years! Whether a fixture is needed for handwashing stations, potwashing stations, laboratories, glass fillers, or grooming operations, T&S has the reliable products you need for consistent performance that will withstand the rigors of everyday commercial use. Their catalog features everything from faucets to sinks, dipper wells, and virtually any gas or water connection you might need. For unrivaled selection and quality, check out T&S for all of your plumbing needs!
Overall Dimensions:
Faucet Height: 5 3/16"
Because this item is not stocked in our warehouse, processing, transit times and stock availability will vary. If you need your items by a certain date, please contact us prior to placing your order. Expedited shipping availability may vary. We cannot guarantee that this item can be cancelled off of the order or returned once it is placed.
Attention CA Residents:
Made in America
This item was made in the United States of America.
NSF/ANSI/CAN 61 (Certified by CSA)
This item is certified by CSA to meet the drinking water system component standards for Canada and the United States outlined in NSF/ANSI/CAN 61.
NSF/ANSI/CAN 372 (Certified by CSA)
This item is certified by CSA to meet the drinking water system component lead content standards for Canada and the United States outlined in NSF/ANSI/CAN 372.
1/2" Water Connection
This unit comes with a 1/2" water connection for water supply.
Resources and Downloads for
T&S Brass and Bronze Works B-0170
A PDF viewer is required to view this product's information. Download Adobe Acrobat software
Resources
Related Items
Wall Mount Faucets
418 Products
Faucet Parts and Accessories
25 Categories
Drain Accessories
316 Products
Commercial Sink Parts and Accessories
506 Products