Name: T&S B-0152-CR-C-TEE EasyInstall Pre-Rinse Unit with 0.65 GPM Spray Valve and Add-On Faucet with 18" Double-Jointed Swing Nozzle
Brand: T&S Brass and Bronze Works
SKU: 510B0152CRTEE
Price: 612.7 USD
Availability: LimitedAvailability

A chrome T&S pre-rinse faucet with a hose.

$612.70/Each

Ships free with Plus

Why do we do this?

Start a Live Chat with a Customer Service rep to receive the price!
Mon - Thur: 5am - 12am EST
Fri: 5am - 8pm EST
Sat & Sun: 9am - 4pm EST.

Earn up to $18.38 back (1,838 points)with a Webstaurant Rewards Visa® Credit Card

Usually Ships in 2-3 Weeks from manufacturer

Lead times vary based on manufacturer stock

Product Overview

Polished, chrome-plated brass body
18" double-jointed swing nozzle offers exceptional flexibility and clearance
Convenient wall mount configuration
Pre-rinse unit features 0.65 GPM low flow spray valve
EasyInstall design simplifies connection and installation process

UPC Code:400016246186

View all T&S Brass and Bronze Works Pre-Rinse Faucets

Quantity: 1/Each
Shipping Weight: 14.3 lb.
Faucet Width: 12 7/16 Inches
Faucet Height: 12 1/8 Inches
Add-On Faucet: 18 Inches
Cartridge Type: Ceramic
Faucet Centers: 8 Inches
Features: Made in America
Finish: Chrome
Flow Rate: 0.65 GPM
Handle Type: Lever
Mounting Style: Wall Mounted
Pre Rinse Unit Type: Hose and Spring
Spray Valve Flow Rate: 0.65 GPM

Customer questions about this product

Can I get a spray valve with a higher flow rate (GPM)?

A: The maximum flow rate for all commercial pre-rinse spray valves produced after January 28, 2019 is 1.28 GPM – more specific regulations may apply based on the valve’s spray force in ounce-force (ozf).

Product Class 1 (5 ozf or less) – Max Flow Rate: 1 GPM
Product Class 2 (5.01 - 8 ozf) – Max Flow Rate: 1.2 GPM
Product Class 3 (over 8 ozf) – Max Flow Rate: 1.28 GPM

These regulations do not impact spray valves made before January 28, 2019, and are implemented by the US Department of Energy in an effort to improve energy conservation.

Does this item have any additional agency approvals and certifications?

There are a wide range of regulations that govern plumbing code! We attempt to list any current certification marks with an official logo on the product page for your convenience. However, additional approvals, codes, and standards this product adheres to may be listed on the product specsheet.

How is the pre-rinse hose length measured?

Unless otherwise specified, the quoted hose length includes any grips or connectors at the end of the hose, so the actual working length of the hose may be slightly less than described. Please refer to the product's specsheet for more detailed dimensions.

What measurements do I need to install a faucet?

When installing a faucet, these are some of the most common measurements you’ll need:

Faucet Centers: If your faucet has a base with 2 inlets, measure the distance from the center of one inlet to the center of the other. This number must match the spacing of your building’s water lines (adjustable centers will help with the spacing). If mounting through the backsplash on a sink, the center measurement must also fit within the pre-drilled mounting holes.

Flex Hoses: If your faucet has flex hoses make sure that they will reach your building’s water lines.

Spout length: Make sure that the faucet spout will fit comfortably over your sink bowl and not extend too far / not far enough. If you plan to use a swing spout over a multi-bowl sink, make sure it will reach all of the bowls.

Ask your own question!

T&S Brass and Bronze Works B-0152-CR-C-TEE Details

Upgrade your dishwashing equipment with this T&S B-0152-CR-C-TEE EasyInstall pre-rinse unit with 0.65 GPM spray valve and add-on faucet with 18" double-jointed swing nozzle. The add-on faucet features 8" centers and 1/2" NPT female inlets for installation. Dual lever handles and an 18" double-jointed swing nozzle provide easy operation and flexible clearance over your sink to simplify dishwashing procedures, and the 2.2 GPM aerator provides a gentle yet effective stream of water. Quarter-turn Cerama cartridges with check valves are installed with the handles to ensure that your faucet runs properly and continuously.

Mounted on top of a sturdy 12" riser is the 44" flexible stainless steel hose, complete with a spring and a low-flow 0.65 GPM spray valve. This unit is perfect for removing stubborn food particles from dishes to reduce the effort needed to produce sparkling clean dishes. The 6" wall bracket and rigid T-assembly secure the riser in place to ensure safe use.

Overall Dimensions:
Spout Length: 18"
Faucet Width: 12 7/16"
Faucet Height: 12 1/8"

Because this item is not stocked in our warehouse, processing, transit times and stock availability will vary. If you need your items by a certain date, please contact us prior to placing your order. Expedited shipping availability may vary. We cannot guarantee that this item can be cancelled off of the order or returned once it is placed.

Attention CA Residents:

Made in America
This item was made in the United States of America.
NSF/ANSI/CAN 61 (Certified by CSA)
This item is certified by CSA to meet the drinking water system component standards for Canada and the United States outlined in NSF/ANSI/CAN 61.
NSF/ANSI/CAN 372 (Certified by CSA)
This item is certified by CSA to meet the drinking water system component lead content standards for Canada and the United States outlined in NSF/ANSI/CAN 372.