Earn up to $40.53 back (4,053 points)with a Webstaurant Rewards Visa® Credit Card
- 18" flex hoses; 5/8" OD copper tube, 1/2" NPSM male connections
- 30" flex hose, 1.07 GPM spray valve; 18" riser
- Lever handles, ceramic cartridges for maximum durability
- 12" add-on faucet, accessory tee included
- Innovative DuraPull valve system; 7 year warranty
- Shipping Weight
- 12.24 lb.
- Hose Length
- 30 Inches
- Faucet Height
- 49 Inches
- Add-On Faucet
- 12 Inches
- Add-on Flow Rate
- 4.51 GPM
- Add-On Type
- Cartridge Type
- Faucet Centers
- Flex Inlets Included
Made in America
- Handle Type
- Mounting Style
- Deck Mounted
- Pre Rinse Unit Type
- Pull-Down Assembly
- Pressure Rating
- 125 PSI
- Spray Valve Flow Rate
- 1.07 GPM
- Temperature Rating
- 40 - 140 Degrees Fahrenheit
- Pre-Rinse Units
- Water Inlet Size
- 1/2 Inches
Customer questions about this product
Can I get a spray valve with a higher flow rate (GPM)?
A: The maximum flow rate for all commercial pre-rinse spray valves produced after January 28, 2019 is 1.28 GPM – more specific regulations may apply based on the valve’s spray force in ounce-force (ozf).
Product Class 1 (5 ozf or less) – Max Flow Rate: 1 GPM
Product Class 2 (5.01 - 8 ozf) – Max Flow Rate: 1.2 GPM
Product Class 3 (over 8 ozf) – Max Flow Rate: 1.28 GPM
These regulations do not impact spray valves made before January 28, 2019, and are implemented by the US Department of Energy in an effort to improve energy conservation.
Does this item have any additional agency approvals and certifications?
There are a wide range of regulations that govern plumbing code! We attempt to list any current certification marks with an official logo on the product page for your convenience. However, additional approvals, codes, and standards this product adheres to may be listed on the product specsheet.
T&S Brass and Bronze Works B-0113-12CRB8TP Details
This T&S B-0113-12CRB8TP pre-rinse faucet is the perfect solution for any dish room that demands the best in reliability and ease-of-use! Featuring the intuitive DuraPull system, this faucet activates the water flow automatically whenever you need it - pull down on the hose to turn the water on, and let the hose retract to turn the water off. This eliminates the strain and discomfort that comes from constantly holding down a spray valve handle, and you will reduce the amount of wasted water too! Best of all, this system is engineered to last and is backed by a 7 year warranty.
The faucet comes with a 30" stainless steel hose for maximum flexibility, while the 1.07 GPM spray valve gives you the power to blast away stubborn food debris with minimal impact on your water bill. A 12" add-on faucet is great for times when it's more convenient to use a traditional spout than the pre-rinse sprayer, and it comes with a full-flow stream regulator outlet. The included accessory tee assembly adds further functionality by allowing you to supply chemical injector systems and other accessories with water through your pre-rinse unit. Cerama cartridges with check valves deliver unparalleled reliability because they use ceramic discs that won't wear down like the soft rubber parts found in most traditional compression cartridges. This creates a long-lasting, tight seal that is backed by a lifetime warranty. Lever handles make it easy to turn the water on and off at the faucet base.
This unit also uses T&S's innovative EasyInstall design to save you time when setting it up. The riser is designed with a lock nut and bushing that pop down into the faucet base, so that you only have to tighten the nut to secure the riser rather than threading it into the base. The 18" flexible connector hoses come ready for 5/8" OD copper tube or 1/2" NPSM male connections. A 6" wall bracket provides extra support and ensures that your new faucet can stand up to even the most rigorous use.
Faucet Height: 49"
Add-On Faucet: 12"
Because this item is not stocked in our warehouse, processing, transit times and stock availability will vary. If you need your items by a certain date, please contact us prior to placing your order. Expedited shipping availability may vary. We cannot guarantee that this item can be cancelled off of the order or returned once it is placed.
1 1/2" Water Connection
This unit comes with a 1 1/2" water connection for water supply.
NSF/ANSI/CAN 61 (Certified by CSA)
This item is certified by CSA to meet the drinking water system component standards for Canada and the United States outlined in NSF/ANSI/CAN 61.
NSF/ANSI/CAN 372 (Certified by CSA)
This item is certified by CSA to meet the drinking water system component lead content standards for Canada and the United States outlined in NSF/ANSI/CAN 372.
Made in America
This item was made in the United States of America.
Need Parts & Accessories?
View replacements or accessories for T&S Brass and Bronze Works B-0113-12CRB8TP
Leave a review of this product!
If you've used this product, log in and leave a review to tell us and other customers what you thought about it. Get paid up to $16 for submitting one of the first text, photo, or video reviews for this item. View your account for details.Login or Register