T&S B-0107-C Ultimate Low Flow Pre-Rinse Spray Valve - 0.65 GPM
- EPAct 2005 Compliant
- 0.65 GPM flow rate
- Fast rinsing power & efficiency
- Handle locking ring
- Heavy duty - tested to over 1 million cycles
T&S Brass and Bronze Works
We have completely overhauled the B-0107-C spray valve used in our pre-rinse units, keeping all of its superior construction, while dramatically reducing the amount of water it uses. You may be familiar with EPAct, the Energy Policy Act of 2005. That legislation set a maximum flow rate for spray valves at 1.6 gallons per minute at 60 psi. You may also be aware that T&S spray valves have always beaten this standard, some by as much as 25%. Our revolutionary new B-0107-C Valve performs at only .65 gallons per minute at 60 psi. 0.65- that's a water savings of 60% over EPAct standards.
Now, you may be thinking, the flow rate may be lower, but what about the performance? I may be saving water, but surely it takes longer to clean, right? Wrong. T&S subjected our new B-0107-C Valve to the dried-on tomato paste test, using the most stringent state standard. California requires a clean plate after only 30 seconds. In addition, other organizations' requirements are 26 seconds or under. At T&S, we have always endeavored to beat this time with our spray valves, to reach a more stringent goal of 21 seconds or less. Even though the new B-0107-C Valve has a drastically reduced flow, it still cleans the plate within the strict California standard, as well as our own, more rigorous standard. Way less water, just as fast! How does our new B-0107-C Valve line up with the competition? Some manufacturers make pre-rinse units that only just meet the EPAct standard of 1.6 gallons per minute. Fisher's model flows at 1.15 gallons per minute at 60 psi, and the valve from CHG flows at 1.2 gallons per minute. The new T&S B-0107-C blows them all away with its amazingly low 0.65 gallons per minute, offering a savings of 100,000 gallons a year over a valve that merely meets EPAct standards.
Enjoy top-quality T&S construction, our outstanding service support, a spray valve designed to beat the strictest of standards, while still delivering powerful performance, and a low, low flow rate of 0.65 gallons per minute. Choose the T&S B-0107-C Spray Valve and watch your savings begin to grow.
Learn all about the super low flow T&S Brass B-0107C super low flow pre-rinse spray valve! This high performance low flow spray valve could save you hundreds of dollars per year in water costs.
Learn how T&S Brass Low Flow pre rinse spray valves and aerators can help save your business thousands throughout the year.
|Flow Rate||.65 GPM|
|Made in America||Yes|
Customer questions about this product
- What is the maximum operating water temperature with this faucet?
- This faucet has a maximum operating temperature of 140 degrees Fahrenheit.
The T&S B-0107-C ultimate low-flow pre-rinse spray valve is designed to deliver the consistent flow you need with the water savings you desire. The only low-flow pre-rinse spray valve endorsed by the Green Restaurant Association, the B-0107-C uses 0.65 GPM, considerably less than the federal limit of 1.6 GPM.
Using this low-flow valve can save up to 100,000 gallons of water per year! Its fan jet style spray pattern delivers a concentrated stream of water to clean your dishes more thoroughly before they go into your dishwasher. These cleaner dishes also mean you won't have to dump and fill your wash water as often, saving even more energy and water!
This low-flow pre-rinse spray valve is 8 7/8" in length with handle and comes with a 3/4" - 14UN male threaded inlet.
WARNING: This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.
Made in America
This item was made in the United States of America.
This item meets the standards imposed by the Canadian Standards Association (CSA).
T&S B-10K-C Repair Kit For B-0107C Low-Flow Pre-Rinse Spray Valve
T&S B-0107 Pre-Rinse Spray Valve
Low Flow Pre Rinse Spray Valves
Pre-Rinse Baskets and Detachable Drainboards
People Talk About:sharp reorder pressure plates Low less GREAT food flow Fehr
Spray valve works GREAT. Low flow uses significantly less water,while the sharp stream still takes a lot of the food off of plates like a pressure washer. I will definetly reorder. Abe Fehr
Abe F. from Del Rios Restaurant Posted on 08/24/2011
Get paid to review this product!
If you've used this product, simply log in and share your text, video, and photo reviews of it. The customers on the left did it, and you can too! Earn up to $16.00 per product.Login or Register