$8,984.52/Each

Contact us for details

Ships free with Plus

Call 717-392-7472 (Mon-Thur 24 Hours, Fri 12AM-8PM EST
Sat & Sun: 9AM-4PM EST)

Protect Your Product with Safeware

Protection Powered by Safeware

  • Durable stainless steel front and anodized aluminum interior
  • Microprocessor control with an easy-to-use LED temperature readout
  • Features a load-sure guard to protect unit from damage
  • Self-closing doors also have a 120 degree stay open feature
  • Interior LED lighting and the glass door design allow for enhanced visibility
  • Magnetic snap-in door gaskets for easy cleaning
  • Includes a set of 6" casters with locks
  • Comes with 6 adjustable epoxy coated shelves
Shipping:
Traulsen: How to Install Universal Trayslides on G Series 2-Section

Traulsen: How to Install Universal Trayslides on G Series 2-Section

Universal Trayslides: How to Install on G-Series 2-Section. Step 1: Label the top side of each Pilaster. The top should have the smaller gap from end to first cut out. Step 2: Remove the Loadsure Guard (duct). Using a flat head screwdriver, pop out the plugs to reveal the screw holes. Step 3: Install the outside panel pilasters (Part # 342-60030-00) with 6 thumb screws each. Step 4: Install the other Pilasters in the same fashion. Back left Pilaster (Part # 342-60033-00). Front left Pilaster (Part # 342-60031-00). Step 5: Begin installing the Trayslides from bottom to top. (Part # 701-600392-00). Step 6: Test the fit to make sure that the Pilasters and Trayslides have been installed level.

Copy and paste the embed code above.

Watch this video to learn how to install universal Traulsen Trayslides on G Series 2-Section.

Traulsen: How to Install #4 Trayslides on G Series 2-Section

Traulsen: How to Install #4 Trayslides on G Series 2-Section

#4 Trayslides: How to Install on G-Series 2-Section. Step 1: Label the top side of each Pilaster. The top should have the smaller gap from end to first cut out. Step 2: Remove the Loadsure Guard (duct). Using a flat head screwdriver, pop out the plugs to reveal the screw holes. Step 3: Install the outside panel pilasters (Part # 342-6026-00) with 6 thumb screws each. Step 4: Install the other Pilasters in the same fashion. Back left Pilaster (Part # 340-60034-00). Front left Pilaster (Part # 342-60032-00). Step 5: Begin installing the Trayslides from bottom to top. (Part # 701-040842-00). Step 6: Test the fit to make sure that the Pilasters and Trayslides have been installed level.

Copy and paste the embed code above.

Watch this video to learn how to install #4 Traulsen Trayslides on G Series 2-Section.

Traulsen: How to Install #1 Trayslides on G Series 2-Section

Traulsen: How to Install #1 Trayslides on G Series 2-Section

#1 Trayslides: How to Install on G-Series 2-Section. Step 1: Label the top side of each Pilaster. The top should have the smaller gap from end to first cut out. Step 2: Remove the Loadsure Guard (duct). Using a flat head screwdriver, pop out the plugs to reveal the screw holes. Step 3: Install the outside panel pilasters (Part # 342-6026-00) with 6 thumb screws each. Step 4: Install the other Pilasters in the same fashion. Back left Pilaster (Part # 340-60034-00). Front left Pilaster (Part # 342-60032-00). Step 5: Begin installing the Trayslides from bottom to top. (Part # 701-60032-00). Step 6: Test the fit to make sure that the Pilasters and Trayslides have been installed level.

Copy and paste the embed code above.

Watch this video to learn how to install Traulsen Trayslides on G Series 2-Section.

Traulsen G21015P Specs
Width 52 1/8 Inches
Depth 37 15/16 Inches
Height 83 1/4 Inches
Interior Width 47 1/8 Inches
Interior Depth 27 Inches
Interior Height 58 7/16 Inches
Amps 9.6 Amps
Hertz 60 Hertz
Phase 1 Phase
Voltage 115 Volts
Access Type Doors
Capacity 48.8 cu. ft.
Compressor Location Top Mounted
Construction Stainless Steel and Aluminum
Door Style Swing
Door Type Glass
Dutch Half Doors No
Hinge Location Left
Horsepower 5/8 HP
Installation Type Freestanding
Number of Doors 4
Number of Shelves 6
Pass-Through Yes
Refrigerant Type R-450A
Sections 2
Temperature Range 34 - 38 Degrees F

Customer questions about this product

Can this item fit through a standard height 80" doorway?
Due to the height of this item, it may not be able to fit through a standard 80" tall doorway when standing upright. Please consider the best means of entry before purchasing, or measure your entryway to ensure that you will be able to bring your order inside if the item cannot be carried on its side.
Ask your own question!

Traulsen G21015P Details

The 48.8 cubic foot Traulsen G21015P two section glass door pass through refrigerator utilizes microprocessor controls and 2" of foamed in place insulation to provide outstanding temperature preservation and performance! Its convenient pass through design enables placement of the unit between kitchen prep areas and server stations, which allows kitchen staff to prepare, plate, and store cold items, like desserts, for wait staff to pull and serve as needed.

Each two section glass door pass through refrigerator features a durable stainless steel front and door frames, with anodized aluminum sides and interior construction. On this G21015P, all of the doors are left-hinged.

The spacious interior of this Traulsen 2 section glass door pass through refrigerator comes standard with 6 epoxy coated wire shelves capable of holding 225 lb. each, and uses internal lighting controlled by an exterior switch. The doors' cam lift hinge design is guaranteed for life, and features a self-closing design, with a stay open feature when the door is opened past 120 degrees.

The Traulsen G21015P features a top mounted, self-contained, balanced refrigeration system (R-450A) and 5/8 hp compressor to hold temperatures between 34 degrees to 38 degrees Fahrenheit. Traulsen's unique clockwise airflow pattern keeps cold air in, and warm air out better whenever the door is opened, while removable vinyl magnetic door gaskets ensure durability and outstanding temperature preservation. Four 6" casters with brakes make the Traulsen G21015P glass door pass-through refrigerator easy to move for cleaning.

Overall Dimensions:
Width: 52 1/8"
Depth: 37 15/16"
Height: 83 1/4"

Interior Dimensions:
Width: 47 1/8"
Depth: 27"
Height: 58 7/16"
Capacity: 48.8 cu. ft.

This Item Ships via Common Carrier. For more information and tips to help your delivery go smoothly, click here.

Because this item is not stocked in our warehouse, processing, transit times and stock availability will vary. If you need your items by a certain date, please contact us prior to placing your order. Expedited shipping availability may vary. We cannot guarantee that this item can be cancelled off of the order or returned once it is placed.

  • NSF Listed

    NSF Listed

    This item meets the standards imposed by NSF International, which focuses on public safety, health, and the environment.

  • Made in America

    Made in America

    This item was made in the United States of America.

  • UL US & Canada

    UL US & Canada

    This item has been tested and meets safety standards imposed by the Underwriters Laboratories (UL) for use in the United States of America and Canada.

  • 5-15P

    5-15P

    This unit comes with a NEMA 5-15P plug.

Resources and Downloads for
Traulsen G21015P

Warranty Info

Note: Traulsen equipment has a 3 year parts and labor warranty. Traulsen compressors have a 5 year warranty. RESIDENTIAL USERS: Vendor assumes no liability for parts or labor coverage for component failure or other damages resulting from installation in non-commercial or residential applications. The right is reserved to deny shipment for residential usage; if this occurs, you will be notified as soon as possible.

Leave a review of this product!

If you've used this product, log in and leave a review to tell us and other customers what you thought about it. Get paid up to $16 for submitting one of the first text, photo, or video reviews for this item. View your account for details.

Login or Register