Spike Brewing Spike Trio 15 Gallon System with NPT Fittings, Single Batch Control Panel, and Wort Chiller
Other Available Types:
- Full brew system includes (3) 15 gallon kettles (hot liquor tank, mash tun, and boil kettle)
- Quickly brews beer in less than 4 hours; NPT threaded fittings ensure secure system connections
- Simple control panel manages pumps and temperatures
- Includes wort chiller
- Requires (1) 240V electrical connection unlike other systems that need up to 5 outlets
You May Also Need
Spike Brewing Quick Connect (QC) x 5/8" Hose Barb Fitting
$14.99 / Each
Spike Brewing 12" Silicone Tubing, 1/2" ID x 3/4" OD
$2.99 / Linear Ft.
Spike Brewing CF10 Unitank 10 Gallon Conical Fermenter
$709.00 / Each
|Stainless Steel Type||Type 304|
This Spike Trio 15 gallon brew system from Spike Brewing makes brewing top-notch beers faster and easier, whether you're looking to hone your craft, or a brewery that wants to test out new recipes on a smaller scale before committing to large-scale production. The turn-key Trio system takes you from grains, water, and hops, to brewing done and fermentation started in as few as 4 hours, while also addressing many common brew day issues!
At the heart of the system are the 3 brew kettles, the hot liquor tank (HLT), mash tun (MT), and boil kettle (BK). Made from type 304 18/8 stainless steel, the kettles are engineered to deliver superior performance and longevity thanks to smart features like sanitary, welded fittings that won't fail over time like weldless designs. 1.2 mm thick walls provide maximum temperature retention and durability, and NPT threaded fittings make connecting the brew system easy. Additionally, the kettles feature a stepped bottom design, which creates a built-in shelf for the false bottom in the MT, resulting in 99.9% grain filtering efficiency with no gasket needed to keep the seal. In the BK, this feature also lets the hops collect in a lower "dead zone" area, which keeps your wort clear as it transfers to the fermenter. A 304 stainless steel HERMS coil in the HLT is used to bring your strike water up to the desired temperature quickly and evenly, before circulating it back into the MT for mash-in. The 15 gallon kettle size allows this system to brew batches between 5 - 11 gallons.
The system features (2) 5500W heating elements, which provide even, consistent control when heating the water in the HLT, and when boiling in the BK. The heating element in the BK can be turned on as soon as enough of the wort has been transferred over to submerge it, so by the time sparging is finished, the BK will be at a full boil, cutting down on total brew time. Instead of the complex valve tree common on many systems, a simple electrical panel lets you manage the pumps independently, and turn on either the BK or HLT element to the desired power level.
Additionally, it comes with an innovative steam condenser lid that transforms the resulting steam into liquid and removes it from the kettle, preventing mold growth on your walls and ceiling while also producing hot water that can be later used for cleaning. By removing the steam, this simple accessory also removes the need for a costly exhaust hood, which saves you on installation and run costs, and gives you the flexibility to place the system in whatever location makes the most sense.
When your boil is done, the included wort chiller drops your finished wort to pitching temperature quickly with its dual-tube design, which runs cold water through an outer tube and hot wort through an inner tube, maximizing contact points for fast cooling as it is transferred into the fermenter. Cleaning the system out couldn't be easier, either - using the hot water left over in the HLT and your preferred brewery wash, you can simply recirculate your cleaning mixture back through the hoses, pumps, and kettles using the same process you used to brew your beer. Scrub away stubborn deposits, drain the cleaning mix, rinse with hot water, and sanitize. You're all done!
It comes with everything needed to get set up and brewing, including 2 food-grade pumps with stainless steel heads, and FDA-approved, food-grade silicone tubing and quick-connect fittings. To help you save money and reduce energy consumption, the system boasts up to 85% efficiency and uses just $5 or less of energy per brew. Additionally, it requires just one 240V electrical connection to power the whole system, where many comparable systems require up to 5 outlets. A power cord and plug are included.
Diameter: 15 13/16"
Height: 19 7/16"
Capacity: 15 gallon
Depth: 8 1/2"
This Item Ships via Common Carrier. For more information and tips to help your delivery go smoothly, click here.
Because this item is not stocked in our warehouse, processing, transit times and stock availability will vary. If you need your items by a certain date,
please contact us prior to placing your order. Expedited shipping availability may vary. We cannot guarantee that this item can be cancelled off of the order or returned once it is placed.
This unit comes with a NEMA 14-30P plug.
Other Products from this Line
Leave a review of this product!
If you've used this product, log in and leave a review to tell us and other customers what you thought about it. Get paid up to $16 for submitting one of the first text, photo, or video reviews for this item. View your account for details.Login or Register