Usually Ships in 5-7 Business Days from manufacturer

Lead times vary based on manufacturer stock

Product Overview

  • Aluminum construction is rust and corrosion resistant
  • Lightweight design makes it simple to remove and clean
  • High load capacity and low air resistance blocks up to 98% of foreign matter
  • Prevents moisture from dripping onto equipment or damaging blower and motor systems
  • Used with stainless steel and carbon filters in ventless hoods
UPC Code:400013629982

NAKS MESH_FILTER_16_20 Specs

Quantity
1/Each
Shipping Weight
4 lb.
Width
16 Inches
Height
20 Inches
Filter Type
Mesh
Material
Aluminum
Thickness
1 7/8 Inches
Type
Ventless Hood Filters

NAKS MESH_FILTER_16_20 Details

Keep your kitchen's ventless hood system working safely and efficiently with this NAKS MESH_FILTER_16_20 16" x 20" aluminum mesh ventless hood filter. This filter's efficient design prevents moisture from dripping onto equipment or damaging blower and motor systems, while its high load capacity and low air resistance blocks up to 98% of foreign matter. Used in conjunction with stainless steel and carbon filters in ventless hood systems, this filter boasts an aluminum construction that is rust and corrosion resistant as well as lightweight for simple removing and cleaning.

Overall Dimensions:
Width: 16"
Height: 20"
Thickness: 1 7/8"

Because this item is not stocked in our warehouse, processing, transit times and stock availability will vary. If you need your items by a certain date, please contact us prior to placing your order. Expedited shipping availability may vary. We cannot guarantee that this item can be cancelled off of the order or returned once it is placed.

Attention CA Residents:

Customer questions about this product

How do I know which side is the "height" and which side is the "width" of my hood filter?

The "height" side runs parallel to the baffles from top to bottom, while the "width" side is the left-to-right measurement. Like this:

Exhaust Hood Filter Measurements

Why are my hood filter's measurements a little different than what you have listed?

We list the nominal industry size of each filter on our site. The actual measurements are approximately 1/2" smaller in size.

Why do the baffles run up and down and not side to side?

These run up and down to allow grease to drain. If installed side to side, not only would you risk the handles getting in the way, but you would have grease build up, which is dangerous.
Ask your own question!

Resources for
NAKS MESH_FILTER_16_20

4 Compatible Models