This video goes over the assembly instructions for the Luxor FP2500 TV stand. The FP2500 includes all the necessary materials and hardware for setup. Assembly is simple as you only need a screwdriver and wrench. Remove pre attached mounting plate from metal rod. Then remove screws form metal rod and slide rod off of adjustable poles. Slide the rod off. Push in spring plungers to offset them from holes. Hold poles and keep a food down on B1 for stability and pull poles upward until you reach desired height and twist to lock plungers in place. Flip base A1 over so caster holes face upward. Thread casters A2 and washer A3 into base and tighten fully with a wrench.Flip base A1 over and lock all four casters to prevent movement. Attach poles B1 to base A1 so that grommet holes are toward the back, using screw K with allen wrench M. Flip unit on its side and attach screw K to base A1 with allen wrench M. Flip the unit back up and attach screw cover A4 so it locks in place. Remove remaining pre-installed screws from metal rod B5. Insert metal rods B5 into back openings on poles B2 making sure screw holes face wire management holes. Refasten metal rods B5 with screws. With assistance push both spring plungers in and pull up to desired height keep fingers clear during any height adjustment to avoid injury. Remove pre-installed screws from bracket R2 and R3. Align and tighten bracket R2 to desired position making sure there is plenty of clearance for your flat panel display. Hook the shelf support R3 onto the bracket R2 and fasten the screws with a screwdriver. Attach the shelf guard to Shelf R1. Position the shelf R1 and fasten with screws and allen wrench L. With assistance, lay your flat panel display on a soft surface. Depending on your TV model you may need to use different combinations of plastic spacers and different screw sizes G,H or J - make sure not to overthread your screw. Lay vertical mounting bars C2 flat on TV again making sure to use proper width and length screws for your specific TV. Line up the next vertical mounting bar C2 so that it matches the position of the previous bar. Line up long horizontal bar C3 so long oval holes are closer to bottom of TV and resting flush on threaded screw holes on both left and right vertical brackets C2. Using the smaller screws T mount to the threaded insert. Make sure the next horizontal bar is in same positioning as the first and line up to the upper threaded screw inserts. With screw T attach the large mounting plate C1 making sure the arrow is pointing towards the top of your TV. Lift up the lock hooks on the mounting plate prior to attaching TV to the unit. With assistance attach the hooks on the mounting plate C1 onto the metal bars B5. Attach the wire management holes onto the unit. Insert cables and cords into the bars. Congratulations, assembly is complete.
Copy and paste the embed code above.
Learn how to assemble the Luxor FP2500 TV Stand by watching this video. The steps are easy to follow and it only requires a few simple tools.
The FP2000 is the base model in the FP series. All of the FP series mounts are designed for a 32 inch to 60 inch flat panel TV. For added security the flat panel display can be locked to the frame. Cable management holes keep cords and cables neatly tucked away inside the tube frame. The FP2500 has a 19.5 inch by 11.5 inch accessory shelf, perfect for a dvd player or laptop. The FP2750 includes the accessory shelf and adds a camera amount for interactive video calls. The FP3500 includes the accessory shelf and adds a rotatable flat panel mount. The mount allows the flat panel to be rotated 90 degrees clockwise. All the FP series mounts adjust in height from 46.5 inches to 62.5 inches from the floor to the top of the poles.
Copy and paste the embed code above.
Watch this video to learn about the mobile flat panel mounts offered from Luxor. This video describes the differences in each model and what accessories are included in each.
Looking to add more visual flair to your next presentation or meeting? This Luxor FP2500 adjustable height TV cart with shelf is the perfect way to mount a flat screen television safely and effectively, and its height adjusts in 2" increments so you can find just the right position for viewing. Capable of accommodating televisions up to 100 lb. and screens 40" - 60", this cart features a seamless pipe construction to ensure superior durability, and a locking mechanism that lets you use a padlock (sold separately) to secure the stand head in place. The main column features built-in cable management with top and bottom holes, too, so you never have to worry about wires catching.
For added convenience, a shelf gives you a place to keep notes, remotes, and other items during presentations. This cart also boasts an attractive powder-coated finish and locking casters to make it easy to move from place to place. VESA compliance for this stand is: 200 x 200mm, 200 x 400mm, 300 x 300mm, 400 x 400mm, and 400 x 600mm.
Overall Dimensions: Width: 32 3/4" Depth: 28 3/4" Minimum Height (floor to top of poles): 46 1/2" Maximum Height (floor to top of poles): 62 1/2" Shelf Width: 19 5/8" Shelf Depth: 12 1/2"
Because this item is not stocked in our warehouse, processing, transit times and stock availability will vary. If you need your items by a certain date,
please contact us prior to placing your order. Expedited shipping availability may vary. We cannot guarantee that this item can be cancelled off of the order or returned once it is placed.
Attention CA Residents
WARNING: This product can expose you to chemicals including lead, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
It worked well. This thing is stout and holds a 70 lb TV fine. Has 2 shelves and you can add a 3rd shelf to it. It is easy to move if needed and I am able to hide most cables behind the stand. I ran some down the inside poles as it has builtin cable management. But as you know, one does not fit all situations. So I used Velcro and tied them behind the poles as well.
I'm so happy with this TV Mount! My 42" TV looks amazing mounted on the stand in my workout room. I couldn't be happier! I highly recommend this product. Delivery was on time and the packaging of the product was excellent.
I cannot compare this with other brands or models as this is the first portable stand I have owned. The pricing on these are all over the board and this one was in a sweet spot where i hoped paying a bit more would mean better quality without breaking the bank. This stand serves my wallet and purpose well. Highly recommend it.
Leave a review of this product!
If you've used this product, log in and leave a review to tell us and other customers what you thought about it.