$349.99/Each

Ships free with Plus

You will only be emailed once the product becomes available. We won't add you to our email list or share your data.

  • Accommodates pizzas and deli trays up to 13" diameter
  • A removable, easy-to-clean thermostatically controlled element emits evenly distributed heat
  • Aluminum body features a removable, stainless steel crumb tray and an adjustable height platform
  • Includes a pizza fork for removing product and a 12 hour timer for saving energy
  • 115V, 1250W
Shipping: Usually Ships in 3-4 Weeks
Heat Seal Pizza Capper

Heat Seal Pizza Capper

Hi my name is Amanda, and I'm with Heat Seal located in Cleveland Ohio, and I'm here to show you our pizza capper: the PC1318. So basically what the pizza capper does is you have your take-and-bake pizzas which you make in the store- it will basically put a film cap on top of the unit so then it holds the toppings in and also gives you a good display area for your refrigerated case. Our pizza capper comes standard with a couple things: a 12 hour timer which you have to turn past 2, and then set it up to 12 hours to the time that you'd like to keep it on for. It also comes with a removable crumb tray for cleaning, take that out, put it in your wash bin to rinse it off, you know, any of the cheese or other toppings that might get stuck at the bottom. And then it also comes with a pizza fork which obviously helps remove the pizza from the platform for safety reasons. The film can get pretty hot so you don't want to lift it with your hands. The pizza fork fits very nicely right in the front of the unit there. So what we're going to do: I have two size pizzas, I have a 12 and a 9 inch. For my 12 inch pizza I have a 22 inch-wide film. So I'm going to take the pizza, place it on the platform here, just right in the middle, and then we have a perforated - this is a single roll perforated film dispenser. What I'm going to do is just pull the film kind of at a 90 degree angle from myself until it tears. Then you're going to flip it over, put it on top of the pizza, kind of try and center the film, and then tuck it underneath the pizza. You can rotate the pizza if you need to, and you may want to kind of stretch out the film on the top so you get a nice clean surface. So then, it can take up to 30 seconds but it's usually quicker- you're going to take your pizza fork and remove the pizza from the platform, and then move on to your next pizza. The next one is a 9 inch pizza here. Take it, place it on the platform. I have an 18 inch film for the 9 inch pizza. So I kind of pull it at a 90 degree from myself until it tears, flip, and then tuck. So basically it's going to shrink up tight on the top here. You want to smooth it down, take the pizza fork, and remove the pizza from the platform. That's basically it. The pizza capper can be found on Heat Seal's website: www.heatsealco.com. Thanks for watching.

Copy and paste the embed code above.

Check out the video for a tutorial on how to use Heat Seal's PC1318 Pizza Capper.

Heat Seal PC-1318 Specs
Width 15 Inches
Depth 15 Inches
Height 13 Inches
Amps 11 Amps
Hertz 60 Hertz
Phase 1 Phase
Voltage 115 Volts
Wattage 1,250 Watts
Installation Type Countertop
Made in America Yes
Power Type Electric
Type Wrapping Machines

Heat Seal PC-1318 Details

Easily wrap pizzas up to 13" in diameter with the Heat Seal PC-1318 pizza roll film wrapping machine. This machine uses a thermostatically controlled heating element that emits constant, evenly distributed heat to securely wrap pizza with film. It's perfect for pizzerias and operations that produce pizza for retail use to keep toppings fresh.

Sturdy, but lightweight, the machine is made of aluminum with rubber feet to prevent sliding. To mitigate aluminum's high conductivity, an inner liner system helps keep heat from the element from building up on the outside perimeter and posing a safety risk. A pizza fork is also included so that employees can safely remove the finished, wrapped pizza.

After use, the machine is easy to clean with its removable stainless steel crumb tray. The heating element is also removable for easy wipe-down cleaning. In addition, a 12 hour timer helps promote energy efficiency while the 6" platform disc adjusts in height to accommodate various sized pizzas. A 115V electrical connection is required for operation.

Overall Dimensions:
Width: 15"
Depth: 15"
Height: 13"

Because this item is not stocked in our warehouse, processing, transit times and stock availability will vary. If you need your items by a certain date, please contact us prior to placing your order. Expedited shipping availability may vary. We cannot guarantee that this item can be cancelled off of the order or returned once it is placed.

Attention CA Residents: Prop 65 Warning

  • Made in America

    Made in America

    This item was made in the United States of America.

  • 5-15P

    5-15P

    This unit comes with a NEMA 5-15P plug.

Resources and Downloads for
Heat Seal PC-1318

Specsheet for HeatSeal PC-1318 Pizza Capper Specsheet Manual for HeatSeal PC-1318 Pizza Capper Manual

A PDF viewer is required to view this product's information. Download Adobe Acrobat software

Leave a review of this product!

If you've used this product, log in and leave a review to tell us and other customers what you thought about it. Get paid up to $16 for submitting one of the first text, photo, or video reviews for this item. View your account for details.

Login or Register