Product Overview

Uniquely designed baffles decrease static pressure
Hinged design allows for thorough cleaning
Quieter operation compared to similar models
Slotted baffles create less strain on fan motor
Drop handles allow for easy installation and removal

UPC Code:400013535818

plus
Noble Chemical 1 Qt. / 32 fl. oz. Formula-D Ready-to-Use Decarbonizer and Degreaser
$5.79/Each
plus
Noble Chemical 1 Gallon / 128 oz. Strike All Purpose Concentrated Cleaner Degreaser - 4/Case
$55.49/Case
plus
FMP 129-1090 Baffle Boss Hood Filter Lifting Fork
$51.99/Each

Quantity: 1/Each
Shipping Weight: 5.47 lb.
Width: 16 Inches
Height: 16 Inches
Filter Type: Standard
Thickness: 1 3/4 Inches
Type: Hood Filters

Details

Keep your exhaust hoods clean with this Franklin stainless steel hinged hood filter! Designed with durability in mind, this hood filter is a long-lasting addition to your establishment. Hood filters trap grease, allowing it to flow down into your hood grease trap to prevent unsafe work conditions. An essential addition to any kitchen with a hood, this filter will keep your kitchen running safely and efficiently!

Solids and grease are deposited directly onto smooth, slotted baffles and drained out, assisting in reducing the potential for grease fires and static pressure. Rugged drop handles ensure both durability and easy installation. When it's time to clean your filter, the handles provide easy removal. This hood filter cleans easily with soap and water. You can also use a pressure washer to ensure that you keep your filter working properly.

Overall Dimensions:
Height: 16"
Width: 16"
Thickness: 1 3/4"

Because this item is not stocked in our warehouse, processing, transit times and stock availability will vary. If you need your items by a certain date, please contact us prior to placing your order. Expedited shipping availability may vary. We cannot guarantee that this item can be cancelled off of the order or returned once it is placed.

Attention CA Residents:

Questions & Answers

Looking For Specific Info?

Get quick answers to product questions with our AI-powered search.

Frequently Asked Questions From Customers

How do I know which side is the "height" and which side is the "width" of my hood filter?

The "height" side runs parallel to the baffles from top to bottom, while the "width" side is the left-to-right measurement. Like this:

Why are my hood filter's measurements a little different than what you have listed?

We list the nominal industry size of each filter on our site. The actual measurements are approximately 1/2" smaller in size.

Why do the baffles run up and down and not side to side?

These run up and down to allow grease to drain. If installed side to side, not only would you risk the handles getting in the way, but you would have grease build up, which is dangerous.