$102.99/Each

  • Sink opening: 3 1/2"
  • Drain opening / outlet: 1 1/2" NPT female x 2" NPT male
  • Flat strainer
  • Lever handle
  • 12 GPM flow rate
  • Overflow port

UPC Code:

642889224384
Shipping:

Usually Ships in 1-2 Business Days

Fisher Drainking

Fisher Drainking

Hi, this is Jeff. Today I'd like to talk to you about drains. This particular drain right here has been the standard of the industry for years. It's a twist waste drain, so as you twist the handle, internally a pop-up goes up and down, just like your bathroom sink at home. Now, if this were a lever waste drain, the handle would move up and down, but it would still be actuating the pop-up mechanism on the inside. The problem with this drain and the pop-up mechanism is the o-ring. As this drain sits on your distributor's shelf for months, ozone is attacking that neoprene o-ring. When it's installed in a three compartment sink in the detergent side of the sink, the detergent attacks the o-ring, the sanitizing agent attacks the o-ring... and the o-ring gets hard, brittle, and cracks, and comes off. The other part of this drain that's a problem is the actual brass that is made over in China. Virtually every single one... every single twist drain sold in America is made in China, regardless of brand. They're all exactly the same. Over there what they do is put in a lot of zinc in their brass, which is a sacrificial metal that just goes over time. As the metal disappears, you develop pinholes in the casting. Now you have water on the floor. Again, the plumber comes in and replaces the drain. It's all about expense. Now, let me show you today's new standard for drains - the Fisher Drainking. The Drainking uses a ball valve. You still get the same twisting action that you got with the twist waste drain, except now we're using a ball valve. I always asked myself the question, 'well why a ball valve?' Well, why do you use a ball valve when you're dealing with natural gas in a commercial kitchen? You always use ball valve around natural gas simply because ball valves don't leak. So now, here's the first drain on the market that's a ball valve and doesn't leak. It's the only no-leak drain on the market. Another thing about this drain is the brass. We use red brass, which has got a lot of copper in it, and a lot of bronze in it. Very little zinc. So you're not going to get that sacrificial metal disappearing. We use stainless steel in the sink compartment because it matches the sink compartment. It comes with a flat strainer, or also you can order them with the basket strainer that sits inside. We use two threads on the connection. The 2" OD thread and the 1 1/2" ID thread. No need for any additional adapters; the plumber can make that connection when they manifold the three drains together. The Fisher Drainking also incorporates a universal sealing angle. This is the angle that sinks are dimpled in the bottom of the sink compartment, and this drain is designed to pull up real flush against that dimple for a very good sealing. Again, we use a solid stainless steel clamping ring for easy installation into that sink compartment. We also make these with overflow connections. We also make them vandal-proof for the prison industry. We make about 27 different model numbers of these drains and so you can go in the catalog and pick the drain that suits your requirements. Fisher waste valves have acquired a reputation over the years for the highest quality, a quality that is unequaled. Thank you very much for listening.

Copy and paste the embed code above.

Instead of frequently replacing corroded sink drains, consider investing in the Fisher Drainking! Made with superior materials and a ball valve, the Drainking is engineered for unparalleled durability, reliability, and longevity to provide you with the quality your busy operation needs.

Fisher 22438 Specs
Basket Drain Size 3 1/2 Inches
Drain Outlet Size 1 1/2 Inches
Made in America Yes
Type Lever Waste Valves

Fisher 22438 Details

This Fisher 22438 lever handle waste valve features a 3 1/2" sink opening that installs easily on a wide range of commercial compartment sinks, while its 1 1/2" female x 2" male drain opening and 12 GPM flow rate allow you to dispose of waste water quickly and efficiently. Additionally, the lever handle design lets you open and close the drain outside the sink bowl, keeping your hands out of dirty water. A flat strainer sits on top of the sink opening to prevent debris from clogging the drain line. This waste valve's body and working parts are made from cast red brass to provide years of reliable use in your kitchen.

Additionally, as part of Fisher's DrainKing line, this valve comes with several key features that provide superior reliability and a longer product life when compared to similar drain valves. Unlike most waste valves, this product uses a ball valve to control water flow, providing leak protection that a standard O-ring valve can't guarantee. This valve is also cast with a low zinc content, which will give it better resistance to pitting and pinholes than similar products.

Because this item is not stocked in our warehouse, processing, transit times and stock availability will vary. If you need your items by a certain date, please contact us prior to placing your order. Expedited shipping availability may vary. We cannot guarantee that this item can be cancelled off of the order or returned once it is placed.

WARNING: This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.

  • Made in America

    Made in America

    This item was made in the United States of America.

Resources and Downloads for
Fisher 22438

Specsheet Specsheet Installation Instructions Instructions Warranty Warranty

A PDF viewer is required to view this product's information. Download Adobe Acrobat software

Get paid to review this product!

If you've used this product, simply log in and share your text, video, and photo reviews of it. The customers on the left did it, and you can too! Earn up to $16.00 per product.

Login or Register