$122.49/Each
Ships free with PlusProduct Overview
- Mounts on 8" centers for easy installation
- 10 1/8" swing spout with 5.03 GPM laminar flow device
- Lever handles with Cerama cartridges
- 1/2" NPT male inlets
- Polished chrome-plated body
Shipping Restrictions
Works With"Works With" items are guaranteed to work with the item you are viewing, such as lids that will fit a cup or casters that will fit a piece of equipment. If an item is not listed in this section, we do not guarantee that it will work with the product you are viewing and do not recommend that you purchase them for use together.
$22.71/Pack
$0.79/Each
$32.49/Each
$9.39/Each
- Quantity
- 1/Each
- Shipping Weight
- 6 lb.
- Spout Length
- 10 1/8 Inches
- Faucet Width
- 11 3/4 Inches
- Faucet Height
- 6 Inches
- Cartridge Type
- Ceramic
- Faucet Centers
- 8 Inches
- Features
- ADA Compliant
- Finish
- Chrome
- Flow Rate
- 5.03 GPM
- Handle Type
- Lever
- Mounting Style
- Deck Mounted
- Mounting Type
- Workboard
- Rough In
- 8 Inches
- Spout Clearance
- 3 9/16 Inches
- Spout Type
- Swing
- Sprayer
- Without Sprayer
- Temperature Rating
- 140 Degrees F
- Type
- Faucets
- Water Inlet Size
- 1/2 Inches
T&S Brass and Bronze Works 5F-8CLX10 Details
This Equip by T&S 5F-8CLX10 deck mounted faucet is the perfect solution when you need a reliable water fixture in your facility. It boasts a set of 8" centers and a 10 1/8" swing spout, while the included 5.03 GPM laminar flow device regulates the water flow without adding air to the water. This reduces contamination of the water and makes this faucet ideal for healthcare applications. For easy installation, the faucet includes 1/2" NPT male inlets.
Additionally, this faucet is engineered for maximum durability and uses Cerama cartridges to adjust the temperature and flow rate. These cartridges contain ceramic discs that form a long-lasting water tight seal. When the lever handles of this faucet are turned, the discs spin to allow water to pass through. T&S cartridges are designed with efficiency and convenience in mind, allowing you to swap out one piece in the event of a leak, instead of replacing multiple moving parts.
T&S has been providing innovative plumbing solutions to commercial applications for all of your most pressing needs for more than 70 years! Whether a fixture is needed for handwashing stations, potwashing stations, laboratories, glass fillers, or grooming operations, T&S has the reliable products you need for consistent performance that will withstand the rigors of everyday commercial use. Their catalog features everything from faucets to sinks, dipper wells, and virtually any gas or water connection you might need. For unrivaled selection and quality, check out T&S for all of your plumbing needs!
Overall Dimensions:
Spout Length: 10 1/8"
Faucet Height: 6"
Faucet Width: 11 3/4"
Because this item is not stocked in our warehouse, processing, transit times and stock availability will vary. If you need your items by a certain date, please contact us prior to placing your order. Expedited shipping availability may vary. We cannot guarantee that this item can be cancelled off of the order or returned once it is placed.
Customer questions about this product
Does this item have any additional agency approvals and certifications?
I live in California. Can I purchase this product?
What measurements do I need to install a faucet?
Faucet Centers: If your faucet has a base with 2 inlets, measure the distance from the center of one inlet to the center of the other. This number must match the spacing of your building’s water lines (adjustable centers will help with the spacing). If mounting through the backsplash on a sink, the center measurement must also fit within the pre-drilled mounting holes.
Flex Hoses: If your faucet has flex hoses make sure that they will reach your building’s water lines.
Spout length: Make sure that the faucet spout will fit comfortably over your sink bowl and not extend too far / not far enough. If you plan to use a swing spout over a multi-bowl sink, make sure it will reach all of the bowls.
ADA Compliant
This item meets criteria established by the Americans with Disabilities Act (ADA).
NSF/ANSI/CAN 61 (Certified by CSA)
This item is certified by CSA to meet the drinking water system component standards for Canada and the United States outlined in NSF/ANSI/CAN 61.
NSF/ANSI/CAN 372 (Certified by CSA)
This item is certified by CSA to meet the drinking water system component lead content standards for Canada and the United States outlined in NSF/ANSI/CAN 372.
1/2" Water Connection
This unit comes with a 1/2" water connection for water supply.
Need Parts & Accessories?
Show replacement parts and accessories for T&S Brass and Bronze Works 5F-8CLX10 today!
Resources and Downloads for
T&S Brass and Bronze Works 5F-8CLX10
A PDF viewer is required to view this product's information. Download Adobe Acrobat software
Resources