$69.99/Each
Ships free with PlusProduct Overview
- 5 9/16" long x 14 13/16" tall gooseneck spout
- 0.5 GPM non-aerated spray device
- Single inlet, 1/2" NPSM male connection
- Lever handle design
Works With"Works With" items are guaranteed to work with the item you are viewing, such as lids that will fit a cup or casters that will fit a piece of equipment. If an item is not listed in this section, we do not guarantee that it will work with the product you are viewing and do not recommend that you purchase them for use together.
- Quantity
- 1/Each
- Shipping Weight
- 5 lb.
- Spout Length
- 5 9/16 Inches
- Faucet Width
- 2 3/8 Inches
- Faucet Height
- 14 13/16 Inches
- Cartridge Type
- Ceramic
- Faucet Centers
- Single
- Finish
- Chrome
- Flow Rate
- 0.5 GPM
- Handle Type
- Lever
- Mounting Style
- Deck Mounted
- Mounting Type
- Adjustable
- Rough In
- Single
- Spout Clearance
- 9 1/2 Inches
- Spout Type
- Gooseneck
- Sprayer
- Without Sprayer
- Type
- Faucets
- Water Inlet Size
- 1/2 Inches
T&S Brass and Bronze Works 5F-1SLX05-VF05 Details
This Equip by T&S 5F-1SLX05-VF05 deck mounted faucet is an excellent choice whether you're looking to install a new water fixture or replace an existing one! It comes with a 14 13/16" tall swivel gooseneck spout, with a 0.5 GPM non-aerated spray device outlet to regulate the water flow without aerating the stream. The outlet is also vandal-resistant, which is great for high traffic installations. The ceramic cartridge design also gives you enhanced reliability compared to traditional compression cartridges. In this design, two ceramic discs fit together to seal the water flow. Since there is no rubber seat washer, this results in fewer wear parts and a more reliable faucet. A lever handle makes turning the water on and off easy. A 1/2" NPSM male inlet and single base makes connecting it to your supply lines easy.
Overall Dimensions:
Spout Length: 5 9/16"
Faucet Height: 14 13/16"
Faucet Width: 2 3/8"
Because this item is not stocked in our warehouse, processing, transit times and stock availability will vary. If you need your items by a certain date, please contact us prior to placing your order. Expedited shipping availability may vary. We cannot guarantee that this item can be cancelled off of the order or returned once it is placed.
Customer questions about this product
Does this item have any additional agency approvals and certifications?
What measurements do I need to install a faucet?
Faucet Centers: If your faucet has a base with 2 inlets, measure the distance from the center of one inlet to the center of the other. This number must match the spacing of your building’s water lines (adjustable centers will help with the spacing). If mounting through the backsplash on a sink, the center measurement must also fit within the pre-drilled mounting holes.
Flex Hoses: If your faucet has flex hoses make sure that they will reach your building’s water lines.
Spout length: Make sure that the faucet spout will fit comfortably over your sink bowl and not extend too far / not far enough. If you plan to use a swing spout over a multi-bowl sink, make sure it will reach all of the bowls.
ADA Compliant
This item meets criteria established by the Americans with Disabilities Act (ADA).
NSF/ANSI/CAN 61 (Certified by CSA)
This item is certified by CSA to meet the drinking water system component standards for Canada and the United States outlined in NSF/ANSI/CAN 61.
NSF/ANSI/CAN 372 (Certified by CSA)
This item is certified by CSA to meet the drinking water system component lead content standards for Canada and the United States outlined in NSF/ANSI/CAN 372.
NSF/ANSI 61 & 372
This item meets the standards imposed by NSF International, which focuses on public safety, health, and the environment.
1/2" Water Connection
This unit comes with a 1/2" water connection for water supply.
Resources and Downloads for
T&S Brass and Bronze Works 5F-1SLX05-VF05
A PDF viewer is required to view this product's information. Download Adobe Acrobat software
Resources