Eagle Group CDTL-48-16/4 48" Left Side 16 Gauge 430 Series Stainless Steel Clean Dish Table
Other Available Sizes:
- Designed to be used on the clean side of a dish washing station
- Provides additional space for unloading dish racks
- Made of 16 gauge type 430 stainless steel
- Connects to the left side of a dishmachine
- 3" upturn with 1 1/2" raised rolled rim on the front and end to aid with drainage
- 8" backsplash
- 1 5/8" diameter galvanized legs with welded cross-bracing and adjustable non-marking bullet feet
"You May Also Need" items are guaranteed to work with the item you are viewing, such as lids that will fit a cup or casters that will fit a piece of equipment. If an item is not listed in this section, we do not guarantee that it will work with the product you are viewing and do not recommend that you purchase them for use together.
Eagle Group 605372 36" x 24 1/8" Galvanized Steel Dishtable Undershelf
plus $236.99 /Each
Eagle Group 605375 36" x 24 1/8" 400 Stainless Steel Dishtable Undershelf
plus $278.99 /Each
Eagle Group 606480 36" x 24 1/8" 300 Stainless Steel Dishtable Undershelf
plus $343.99 /Each
Eagle Group 311772 Stainless Steel H Leg Set
plus $69.99 /Each
|Eagle Group CDTL-48-16/4 Specs|
|Height||42 1/2 - 43 1/2 Inches|
|Backsplash Height||8 Inches|
|Work Surface Height||34 1/2 - 35 1/2 Inches|
|Installation Type||Left Side|
|Leg Construction||Galvanized Steel|
|Made in America||Yes|
|Stainless Steel Type||Type 430|
Customer questions about this product
- How can I be sure that this dish table is compatible with my commercial dish machine?
- To verify the compatibility of this dish table with your unit, please provide the following pieces of information to our Special Orders team:
Dish Machine Brand: This is the name of the manufacturer of your dish machine, such as CMA, Jackson, Hobart, etc.
Model Number: The placement of this information will vary by manufacturer, but it is often located in product literature (manuals or specification sheets) and/or somewhere on the unit.
Please note that some dish tables must be modified to ensure that they will fit with certain brands of dish machines. Occasionally, this service will require an upcharge depending on what modifications need to be made.
Eagle Group CDTL-48-16/4 Details
Provide plenty of space to unload glass and dish racks from your dishwasher by adding this Eagle Group CDTL-48-16/4 48" left side stainless steel clean dish table to your warewashing system. This table is made of 16 gauge type 430 stainless steel for long-lasting durability and has an 8" backsplash to protect your walls from water damage and impact from warewashing racks. It also has a 3" upturn on the sides to help contain and drain away excess water that drips from your clean dishes. The smooth 1 1/2" rounded edge helps to make this table safer for employee use since it eliminates sharp corners and edges.
This dish table has a straight design and is made to connect to the left side of your dishmachine. This means that the lip to connect this table to the dish machine is on the right-hand side while the legs are on the left-hand side. The 1 5/8" diameter galvanized legs come equipped with welded cross-bracing to provide additional support for heavily loaded dish racks and adjustable non-marking bullet feet so that you can level this table on an uneven floor. Each foot has 1" of adjustability.
Left to Right: 48"
Front to Back: 30"
Height: 42 1/2" to 43 1/2"
Height (without backsplash): 34 1/2" to 35 1/2"
This item is made-to-order and cannot be canceled or returned once your order is placed. Please contact Customer Solutions prior to placing your order if you have any questions or concerns.
Made in America
This item was made in the United States of America.
This item meets the standards imposed by NSF International, which focuses on public safety, health, and the environment.
Other Products from this Line
Get paid to review this product!