Cres Cor R-171-SUA-20E ChillTemp Two Door Refrigerated Cabinet - 120V, 1/3 hp
Item number 265r171su20eMFR number R171SUA20E
$12,642.00/Each
This product is no longer available. We've left this page up for reference only.
Product Overview
- Fully insulated refrigerated cabinet for cold holding applications
- Interior houses 20 sets of wire universal angles on 4 1/2" centers; adjustable on 1 1/2" centers
- Accommodates a variety of pan sizes for convenient storage versatility
- Recessed, extruded door handles and magnetic door gaskets
- 120V, 1/3 hp
- Quantity
- 1/Each
- Shipping Weight
- 677 lb.
- Width
- 62 Inches
- Depth
- 35 1/2 Inches
- Height
- 74 3/4 Inches
- Interior Width
- 22 Inches
- Interior Depth
- 27 1/2 Inches
- Interior Height
- 46 3/4 Inches
- Amps
- 15 Amps
- Hertz
- 60 Hz
- Phase
- 1 Phase
- Voltage
- 120 Volts
- Access Type
- Doors
- Capacity
- 39 cu. ft.
- Caster Size
- 6 Inches
- Casters
- With Casters
- Construction
- All Stainless Steel
- Door Style
- Swing
- Door Type
- Solid
- Dutch Half Doors
- Without Dutch Half Doors
- Features
- Made in America
- Horsepower
- 1/3 hp
- Installation Type
- Freestanding
- Insulated
- With Insulation
- Number of Doors
- 2 Doors
- Number of Tray Slides
- 20
- Plug Type
- NEMA 5-15P
- Refrigerant Type
- R-134A
- Sections
- 2 Sections
- Temperature Range
- 33 - 40 Degrees F
Cres Cor R171SUA20E Details
Increase your output efficiency and food quality with the Cres Cor R-171-SUA-20E insulated ChillTemp refrigerated holding cabinet! After your specialty dishes are prepared and ready to serve, storing them in this unit between 33 and 40 degrees Fahrenheit will maintain their serving temperature until mealtime. Its refrigeration system uses a 1/3 hp compressor, circulating R134a refrigerant to ensure the proper interior environment.
The body is made of stainless steel and features foamed-in-place insulation. Combined with an internal stainless steel frame that serves to fortify and protect the body of the cabinet, this unit is especially durable and reliable in busy kitchens and with everyday use. The interior features 20 sets of wire universal angles on 4 1/2" centers that adjust to 1 1/2" centers. As a result, the unit accommodates a variety of pan sizes, including 22" x 20" or 10" x 20" roast pans, full size sheet pans, 14" x 18" trays, or full size steam table pans. Plus, at the end of the day, the interior is easy to clean thanks to the coved corners.
For your convenience, the doors comes outfitted with magnetic gaskets for a tight seal. The unit is even designed to prevent wall and equipment damage with its recessed handles. Unlike protruding handles, these won't bang into and dent nearby surfaces when the doors are hastily thrown open. The cabinet also comes equipped with push/pull handles on either exterior side, as well as a full-perimeter bumper to protect surroundings during transport. Combined with a transport latch, these features make maneuvering both safe and easy. A set of 4 heavy-duty 6" casters enable mobility; 2 casters swivel and feature brakes. A 120V electrical connection is required for operation.
Overall Dimensions:
Width: 62"
Depth: 35 1/2"
Height: 74 3/4"
Capacity: 39 cu. ft.
Interior Dimensions (Per Side):
Width: 22"
Depth: 27 1/2"
Height: 46 3/4"
CSA, US and Canada
This product has been certified by the Canadian Standards Association (CSA) to meet select standards for electrical, plumbing, and/or mechanical products in the United States and Canada.
Made in America
This item was made in the United States of America.
5-15P
This unit comes with a NEMA 5-15P plug.
CSA Sanitation NSF4
This item is certified for the U.S. market to the requirements of the NSF/ANSI 4 standard of the Canadian Standards Association (CSA).
Need Parts & Accessories?
Show replacement parts and accessories for Cres Cor R171SUA20E today!
Resources and Downloads for
Cres Cor R171SUA20E
A PDF viewer is required to view this product's information. Download Adobe Acrobat software