$7,861.00/Each

Contact us for details

Ships free with Plus

Call 717-392-7472(Mon - Thur: 5am - 12am EST
Fri: 5am - 8pm EST
Sat & Sun: 9am - 4pm EST)

Why do we do this?

Due to a manufacturer's price increase, this price will increase by 3.00% on 01/01/25

Earn up to $235.83 back (23,583 points)with a Webstaurant Rewards Visa® Credit Card

Usually Ships in 4 Weeks from manufacturer

Lead times vary based on manufacturer stock

Product Overview

  • Durable stainless steel interior and exterior
  • Manual humidity vents at the top of the cabinet allow for more control over operation
  • Self-closing door features safety stops, a lock, and a magnetic gasket
  • Easy-to-read control panel
  • Antimicrobial handle ensures sanitary use

Shipping Restrictions

This item cannot ship to CA, CO, CT, DC, MA, ME, NH, NJ, NV, NY, OR, RI, VT or WA
UPC Code:400015835640

Beverage-Air PHI1-1S Specs

Quantity
1/Each
Shipping Weight
310 lb.
Width
36 1/2 Inches
Depth
36 1/8 Inches
Height
84 3/8 Inches
Interior Width
31 1/4 Inches
Interior Depth
26 Inches
Interior Height
66 1/4 Inches
Amps
6.3 Amps
Hertz
60 Hz
Phase
1 Phase
Voltage
208 - 240 Volts
Wattage
1,500 Watts
Access Type
Doors
Cabinet Size
Full Height
Capacity
33.6 cu. ft.
Casters
Without Casters
Color
Silver
Construction
Aluminum  Stainless Steel
Control Type
Thermostatic
Door Type
Solid
Dutch Half Doors
Without Dutch Half Doors
Features
Made in America
Installation Type
Freestanding
Insulated
With Insulation
Number of Doors
1 Door
Plug Type
NEMA 6-20P
Sections
1 Section
Temperature Range
80 - 180 Degrees F
Type
Holding Cabinets

Beverage-Air PHI1-1S Details

Provide customers with top-quality service by keeping food warm in this Beverage-Air PHI1-1S 68 7/8" solid door roll-in warming cabinet. The cabinet is easy to control with an indicator panel and thermometer, allowing you to adjust the temperature between 80 and 180 degrees Fahrenheit. Plus, an externally-mounted blower system ensures that heat is distributed evenly throughout the food zone. For control over the cabinet's humidity, simply manipulate the manual vents along the top of the cabinet.

This holding cabinet boasts a solid door that is self-closing to help prevent energy loss and includes a snap-in magnetic gasket to seal tightly. Safety stops provide additional convenience, and an antimicrobial handle ensures sanitary use. The reinforced door ramp and cart guides inside the unit help accept carts up to 26" x 26" x 64 1/2" for ample storage. At the end of the day, the door locks for product security.

Both the exterior and interior of the cabinet are stainless steel, which not only provides durability, but it resists corrosion and helps to ensure easy cleaning. An 8' long cord and plug set is included, and a 208-240V electrical connection is required for operation.

Overall Dimensions:
Width: 36 1/2"
Depth: 36 1/8"
Height: 84 3/8"
Capacity: 33.6 cu. ft.

Interior Dimensions:
Width: 31 1/4"
Depth: 26"
Height: 66 1/4"

This Item Ships via Common Carrier. For more information and tips to help your delivery go smoothly, click here.

Because this item is not stocked in our warehouse, processing, transit times and stock availability will vary. If you need your items by a certain date, please contact us prior to placing your order. Expedited shipping availability may vary. We cannot guarantee that this item can be cancelled off of the order or returned once it is placed.

Attention CA Residents:

Customer questions about this product

Does Beverage-Air warrant this item for use in a food truck?

This item is covered under Beverage-Air's warranty contingent upon the unit being kept in a controlled climate. This means that the interior of the food truck may not be susceptible to extreme high or low temperatures. If warranty service is required, the truck must be able to sit stationary for 24-48 hours to allow for a technician to service the equipment.

Is this cooking equipment available in all 50 states?

Due to energy regulations this cooking equipment is not available in California, Colorado, Connecticut, District of Columbia, Maine, Massachusetts, Nevada, New Hampshire, New Jersey, New York, Oregon, Rhode Island, Vermont, and Washington.

What's the difference between an insulated and non-insulated holding cabinet?

Insulated and non-insulated holding cabinets both offer the same function by holding food at safe temperatures for hours until ready to serve, but for best results it's important to make a purchase based on your desired application. Non-Insulated Holding Cabinets are intended for applications where the doors will be closed for the majority of the day, such as proofing bread or keeping back-up portions hot. Insulated Holding Cabinets are better suited for keeping food hot when the doors will be opened and closed much more frequently, since they are better equipped at retaining the heat.

Can this item fit through a standard height 80" doorway ?

Due to the height of this item, it may not be able to fit through a standard 80" tall doorway when standing upright. Please consider the best means of entry before purchasing, or measure your entryway to ensure that you will be able to bring your order inside if the item cannot be carried on its side.
Ask your own question!
  • Made in America

    Made in America

    This item was made in the United States of America.

  • UL Classified EPH

    UL Classified EPH

    This product has been certified by the Underwriters Laboratories (UL) to meet applicable ANSI/NSF standards and / or other food equipment hygiene codes and requirements.

  • 6-20P

    6-20P

    This unit comes with a NEMA 6-20P plug.

  • UL Sanitation

    UL Sanitation

    This item has been tested and meets the sanitation hazard standards imposed by the Underwriters Laboratories (UL).

  • UL Listed, US

    UL Listed, US

    This product has been certified by the Underwriters Laboratories (UL) to meet applicable safety standards required for use in the United States.

Resources and Downloads for
Beverage-Air PHI1-1S

A PDF viewer is required to view this product's information. Download Adobe Acrobat software

Warranty Info

Note: Beverage Air equipment purchased in 2013 or later will have a 3 year parts and labor warranty. Equipment purchased prior to 2013 will have a 1 year parts and labor warranty. RESIDENTIAL USERS: Your warranty will be voided if installed in non-commercial or residential applications.