$6,951.00/Each

Contact us for details

Ships free with Plus

Call 717-392-7472(Mon - Thur: 5am - 12am EST
Fri: 5am - 8pm EST
Sat & Sun: 9am - 4pm EST)

Why do we do this?

Due to a manufacturer's price increase, this price will increase by 3.00% on 01/01/25

Earn up to $208.53 back (20,853 points)with a Webstaurant Rewards Visa® Credit Card

Installation Services

Check if installation is currently available for your area.

Usually Ships in 4 Weeks from manufacturer

Lead times vary based on manufacturer stock

Product Overview

  • Stainless steel exterior; aluminum interior
  • Six adjustable shelves
  • Wide door openings fit various pan slides (sold separately)
  • Foamed-in-place CFC and HCFC-free polyurethane insulation
  • Adjustable thermostat from 80-180 degrees Fahrenheit

Shipping Restrictions

This item cannot ship to CA, CO, CT, DC, MA, ME, NH, NJ, NV, NY, OR, RI, VT or WA
UPC Code:400011050795

Beverage-Air PH2-1S Specs

Quantity
1/Each
Shipping Weight
540 lb.
Width
52 1/8 Inches
Depth
36 Inches
Height
84 Inches
Amps
13 Amps
Hertz
60 Hz
Phase
1 Phase
Voltage
208/240 Volts
Wattage
3,000 Watts
Cabinet Size
Full Height
Capacity
46.5 cu. ft.
Casters
Without Casters
Color
Silver
Construction
Aluminum  Stainless Steel
Control Type
Thermostatic
Door Type
Solid
Dutch Half Doors
Without Dutch Half Doors
Features
Made in America  NSF Listed
Insulated
With Insulation
Interior Configuration
Shelves
Number of Doors
2 Doors
Plug Type
NEMA 5-20P
Sections
2 Sections
Type
Holding Cabinets

Beverage-Air PH2-1S Details

Keep food hot and fresh for hours with this Beverage Air PH2-1S two section solid door reach-in heated holding cabinet. Its easy-to-adjust temperature controls, ranging from 80 to 180 degrees Fahrenheit, make it easy to prepare food prior to busy serving periods and hold it at just-cooked quality! A balanced fan system, manually controlled humidity vents, and 3000W heating element provide excellent heat retention, recovery, and even temperature distribution. Wide door openings will fit pan slides of various sizes.

- Dial thermometer and adjustable thermostat are accurately calibrated from 80 to 180 degrees Fahrenheit

- Exterior: Cabinet front and doors constructed of heavy gauge stainless steel

- Interior: Aluminum side walls and back; stainless steel floor and ceiling

- Strip-type 3000W heating elements

- Externally mounted fan system and manually controlled top-mounted humidity vents help maintain even temperatures

- Foamed-in-place CFC and HCFC-free polyurethane insulation

- Self-closing doors with 120 degree stay-open feature

- (6) adjustable heavy duty wire shelves

- Wide door openings will fit pan slides sized at 12"x20", 18"x 26", and 14" x 18"

- 6" adjustable black legs

- 208-240V

Overall Dimensions:
Left to Right: 52 1/8"
Front to Back: 36"
Height (including legs): 84"
Volume: 46.5 cu. ft.

This Item Ships via Common Carrier. For more information and tips to help your delivery go smoothly, click here.

Because this item is not stocked in our warehouse, processing, transit times and stock availability will vary. If you need your items by a certain date, please contact us prior to placing your order. Expedited shipping availability may vary. We cannot guarantee that this item can be cancelled off of the order or returned once it is placed.

Attention CA Residents:

Customer questions about this product

Does Beverage-Air warrant this item for use in a food truck?

This item is covered under Beverage-Air's warranty contingent upon the unit being kept in a controlled climate. This means that the interior of the food truck may not be susceptible to extreme high or low temperatures. If warranty service is required, the truck must be able to sit stationary for 24-48 hours to allow for a technician to service the equipment.

Is this cooking equipment available in all 50 states?

Due to energy regulations this cooking equipment is not available in California, Colorado, Connecticut, District of Columbia, Maine, Massachusetts, Nevada, New Hampshire, New Jersey, New York, Oregon, Rhode Island, Vermont, and Washington.

What does the “H” or “HC” mean in the newer Beverage-Air model numbers?

This is a representation that the unit is using a “Hydrocarbon” refrigerant. This would include both R290 and R600a refrigerants. They are being used as an eco-friendly refrigerant by Beverage-Air in response to the EPA’s Significant New Alternatives Policy (SNAP) Program. Read more about this program in our blog post on Refrigerant Regulations.

What's the difference between an insulated and non-insulated holding cabinet?

Insulated and non-insulated holding cabinets both offer the same function by holding food at safe temperatures for hours until ready to serve, but for best results it's important to make a purchase based on your desired application. Non-Insulated Holding Cabinets are intended for applications where the doors will be closed for the majority of the day, such as proofing bread or keeping back-up portions hot. Insulated Holding Cabinets are better suited for keeping food hot when the doors will be opened and closed much more frequently, since they are better equipped at retaining the heat.

Can this item fit through a standard height 80" doorway ?

Due to the height of this item, it may not be able to fit through a standard 80" tall doorway when standing upright. Please consider the best means of entry before purchasing, or measure your entryway to ensure that you will be able to bring your order inside if the item cannot be carried on its side.
Ask your own question!
  • 5-20P

    5-20P

    This unit comes with a NEMA 5-20P plug.

  • Made in America

    Made in America

    This item was made in the United States of America.

  • UL Listed, US

    UL Listed, US

    This product has been certified by the Underwriters Laboratories (UL) to meet applicable safety standards required for use in the United States.

  • NSF Listed

    NSF Listed

    This item has been certified by NSF International to meet applicable product standards on public safety, health, and / or the environment.

Need Parts & Accessories?

Show replacement parts and accessories for Beverage-Air PH2-1S today!

Resources and Downloads for
Beverage-Air PH2-1S

A PDF viewer is required to view this product's information. Download Adobe Acrobat software

Warranty Info

Note: Beverage Air equipment purchased in 2013 or later will have a 3 year parts and labor warranty. Equipment purchased prior to 2013 will have a 1 year parts and labor warranty. RESIDENTIAL USERS: Your warranty will be voided if installed in non-commercial or residential applications.