$250.00/Each

Ships free with Plus

Earn up to $7.50 back (750 points)with a Webstaurant Rewards Visa® Credit Card

Quick Shipping

Usually ships in 1 business day

Product Overview

  • Made of durable 18 gauge stainless steel
  • 7" deep bowl with drain opening and drain strainer
  • Sound pads and insulation help minimize noise
  • Undermount installation for a seamless look
  • Includes cutout template for convenient installation
UPC Code:791556109278

American Standard 18SB.7001600S Specs

Quantity
1/Each
Shipping Weight
1.67 lb.
Height
7 Inches
Diameter
16 3/8 Inches
Bowl Depth
7 Inches
Bowl Diameter
14 1/4 Inches
Color
Silver
Drain Opening
3 9/16 Inches
Gauge
18 Gauge
Installation Type
Undermount
Material
Stainless Steel
Number of Compartments
1 Compartment
Type
Undermount Sinks

American Standard 18SB.7001600S Details

Enhance your kitchen workspace with this American Standard Portsmouth undermount sink! Made of durable 18 gauge stainless steel, this sink is designed to withstand daily use in busy kitchens. It features a 7" deep bowl, providing ample space for washing and rinsing. It's perfect for use in a front-of-house bar area, or as an addition to a prep area where you need an extra handwashing, utility, or prep sink.

To help reduce sound and vibrations, there are SoundSecure rubber pads on the bottom and sides of the sink. This unit also features StoneLock multi-layer spray insulation for extra sound absorption and reduced condensation underneath the sink. Thanks to its undermount design, this sink will create a seamless, professional look in your commercial kitchen.

This sink comes complete with a drain strainer to catch food debris and prevent clogging. Additionally, a cutout template and instructions are included for quick and easy setup.

Overall Dimensions:
Diameter: 16 3/8"
Height: 7"

Bowl Dimensions:
Diameter: 14 1/4"
Depth: 7"

Attention CA Residents:

Customer questions about this product

Does this item have any additional agency approvals and certifications?

There are a wide range of regulations that govern plumbing code! We attempt to list any current certification marks with an official logo on the product page for your convenience. However, additional approvals, codes, and standards this product adheres to may be listed on the product specsheet.

What cutout do I need for my sink?

If you're choosing a drop-in sink, this information should be provided in the specifications for the product. The cutout must be large enough to accommodate the sink bowl(s) but also not bigger than the lip of the sink, which overhangs the cutout and holds it in place.

If you're choosing an undermount sink, the sink will install underneath the counter, so your cutout size should be about the same as the total, combined dimensions of your sink bowl(s) for a clean look. Your countertop must also have a finished edge around the cutout, since top of the bowl installs below the cut, leaving it exposed.
Ask your own question!

Resources and Downloads for
American Standard 18SB.7001600S

A PDF viewer is required to view this product's information. Download Adobe Acrobat software